WRT160N v3 Ultra Range - range not very far

Lighting burnt out my wireless-G router so tech support recommended I upgrade from Wireless G to wrt160 for better performance. However, with this one I don't have near the range the wireless G had. The wireless G had a range over 200ft with no problem but the wrt160N Ultra Range won't reach 150ft. Do I need to make a change in the settings for it to reach further?

Re-adjust the wireless settings of your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

N Ultra Range Pluse WRT160n router

I can't connect my N Ultra Range Pluse WRT160n router wirelessly to my laptop.It showing undefined network only & it IP address taking is starting with 169 and it is not asking the network share key also . But I can connect to another laptop & my laptop can connect another wireless connection .kindly reply me what is the problem?
one more problem i have when i try to connect wirelessly to another laptop it is asking pin only not asking the key
kindly reply me
Solved!
Go to Solution.

I think you need to make some wireless changes on your Router. I think this will solve the problem.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
OR.
While connecting to your Wireless Network, If it ask you for the Pin number, Flip your Router upside down, and you will find the 8 digit Pin number, note down the pin number and when prompted type and Pin number and click on Connect and you should be able to go online wirelessly from your Computer.

Order number range not define

Hi Experts,
when i create a production order system generate error massage " NUMBER RANGE NOT DEFINE ".
I have maintained OPJH (Number range also) and i have maintained CO82.
and order type also assign to number range group .
when i create production order in particular plant(1100) with same order type(PP01) then generate a error massage but when I create production order in other plant(2100,3100,4100) with same order type (PP01) then not a problem.
OPJH, OPJK, OPU3, OPL8 also maintained in this plant(1100) for this order type
Please suggest me
Thanks in advance............................

Please do the following
1. Double check in CO82-> Change number groups -> Double click the Production order type (PP01) change the number range & save.
2. As you specified its working well for the other plants 2100,3100,4100. Please check in OPL8 whether the plant 1100 is assigned to the specific order type or not. But CO82 is not plant specific its global change of number ranges for all the plants.
3. Finally if you are trying this with in development system, check with the basis whether the transport reqeust will take time to update.
Check and revert back.
Regards,
Sundhu

Release rejected - Number Range not found.

Hi,
Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
When I try to release the order it shows Release rejected and check log .
In the log I find below message thrown.
" You must enter the batch for material XYZ
*Message no. CO691"
However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
In the log I find below message thrown.
" Number range not defined
Message no. 26023
Diagnosis
You have enter number range for the document type, but this number range is not defined for the number range object "document".
Procedure
Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
I have done the number range for order type RW01 in CO82 as well .
Is there anything I miss in Order Type configuration or Batch Management.
In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
Production Scheduling profile is also same for both.
Regards
Bhgl

Dear,
Please check the number range in CO82 or OPJH for your order type RW01.
Also check the component has determine the batch.
In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
Regards,
R.Brahmankar

Number range not foung when doing profit center distribution

hi
iam getting error message profit center number range not found when doing distribution in profit centers. can any one help me with this.
thanks
monica

issue is solved
thanks

Number range not defined

Dear Sir,
When i creating production order in CO01 error is coming number range not defined.
Guide me where we defined number range for production order.i have maintained in co82
but the issue is not solved.

Go to OPJH
select your order type
And select the number range in Order type
select you order type and assign in Number range group
and then create a new order
Or Go to Co82
select Group
Your order type is in Not assigned
select your order and assign to group

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

Unable to Sync Anything -- "Requested Range not Satisfiable" [SOLVED]

I have been having a really annoying problem for a while now. Every time I try to sync anything with pacman (package lists, updates, etc.) if a hiccup occurs in my Internet connection, the download is corrupted and I get the error: "Requested Range not Satisfiable". The only way to get around this is to manually delete the .part file in /var/cache/pacman/pkg, but for large packages it is basically impossible to update them, because the problem is bound to happen during the course of the download and I have to start anew.
Does anyone know why this is happening?
Last edited by egan (2009-10-05 14:10:43)

Maybe the problem below is related to this. In resume, I have 770M free and in this case, I need to download a total of ~217M to upgrade the system. But even after the first package downloaded, I got this error. bash is not that big. And after this, I have 0M of free space on /var.
Any hints? Thank you.
[internet@amparo02 var]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 1.9G 264M 1.5G 15% /
none 93M 144K 93M 1% /dev
none 93M 0 93M 0% /dev/shm
/dev/sda6 950M 132M 770M 15% /var
/dev/sda7 23G 19G 2.4G 89% /home
/dev/sda8 15G 3.5G 10G 26% /usr
[internet@amparo02 var]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (71): bash-4.0.033-1 bluez-4.54-1 db-4.8.24-1 libsasl-2.1.23-2
libetpan-0.58-2 claws-mail-3.7.2-3 device-mapper-2.02.53-1
libldap-2.4.18-1 dirmngr-1.0.2-2 dsniff-2.4b1-14
e2fsprogs-1.41.9-1 sqlite3-3.6.18-1 heimdal-1.2.1-7
libical-0.44-1 evolution-data-server-2.26.3-2 ekiga-3.2.5-2
libnet-1.1.4-1 ettercap-NG_0.7.3-13 fakeroot-1.13.1-1
perl-5.10.1-3 fvwm-devel-2.5.28-1 gconf-2.26.2-3
gnome-mplayer-0.9.8-2 gecko-mediaplayer-0.9.8-1
gnumeric-1.8.4-4 gnupg-1.4.10-2 gnupg2-2.0.13-2
gnuplot-4.2.6-1 gpm-1.20.6-3 groff-1.20.1-3 hunspell-1.2.8-2
imagemagick-6.5.6.1-1 iproute2-2.6.29-2 libcap-2.17-1
librep-0.90.2-1 lvm2-2.02.53-1 man-pages-3.23-1
maxima-5.19.2-3 mlocate-0.22.1-1 module-init-tools-3.10-2
mpd-0.15.4-1 ncmpc-0.15-2 nfsidmap-0.23-3 nicotine-1.2.12-3
octave-3.2.3-1 openbox-3.4.7.2-3 openvpn-2.1_rc19-4
pam-1.0.4-2 perl-berkeleydb-0.39-1 perl-html-parser-3.62-1
perl-www-curl-4.09-1 libnice-0.0.9-1
gstreamer0.10-python-0.10.16-1 python-2.6.3-2
farsight2-0.0.16-1 pidgin-2.6.2-3 qemu-0.11.0-1 qt-4.5.3-3
rxvt-unicode-9.06-3 sdparm-1.04-1 smbclient-3.3.7-2
sonata-1.6.2.1-1 taglib-1.6-1 terminal-0.4.1-1 tmux-1.0-1
tor-0.2.1.19-2 tzdata-2009n-1 wget-1.12-1 wireshark-1.2.2-1
xfce4-settings-4.6.3-1 xfconf-4.6.1-2
Total Download Size: 216.96 MB
Total Installed Size: 726.34 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
error: error writing to file '/var/cache/pacman/pkg/bash-4.0.033-1-i686.pkg.tar.gz': No space left on device
error: failed retrieving file 'bash-4.0.033-1-i686.pkg.tar.gz' from archlinux.c3sl.ufpr.br : Requested action aborted: local error in processing
error: failed retrieving file 'bash-4.0.033-1-i686.pkg.tar.gz' from archlinux.c3sl.ufpr.br : Requested Range Not Satisfiable
error: failed retrieving file 'bash-4.0.033-1-i686.pkg.tar.gz' from archlinux.unixheads.org : Requested Range Not Satisfiable
^C
Interrupt signal received
[internet@amparo02 var]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 1.9G 264M 1.5G 15% /
none 93M 144K 93M 1% /dev
none 93M 0 93M 0% /dev/shm
/dev/sda6 950M 950M 0 100% /var
/dev/sda7 23G 19G 2.4G 89% /home
/dev/sda8 15G 3.5G 10G 26% /usr
[internet@amparo02 var]$

Requested Range Not Satisfiable

I am trying to install xorg, but I get keep on getting the error described here
http://bbs.archlinux.org/viewtopic.php?id=90601
Apparently the solution is pacman -Syu, but upon use of the command I get this error
error: failed to commit transaction (Requested Range Not Satisfiable)
I have tried changing mirrors and checked the mirrors I use with
https://users.archlinux.de/~gerbra/mirrorcheck.html
but no matter what mirror I use, I still get the error, even after pacman -Syy

Please use 'LC_MESSAGES=C <command>' for posting on the forums.
Please use forum search before posting.
Have you tried other mirrors? If yes, please be sure to post such info.
Last edited by karol (2011-04-15 03:44:13)

Maitenance Plan - Number range not defined

I am trying to create a maintenance plan from a brand new system. When going to IP31 I get the error, number range not defined. So I went to SPRO and transported the number ranges. It still would not create a maintenace plan and got the same error. Am I supposed to assign the categories to the Maitenance plans number ranges? If so, how do I do this?
Your help is appreciated.

Hi,
There are two relevant number ranges - One for maintenance plan and the other for maintenance item. Customizing as follows:
-Plant Maintenance and Customer Service
-Maintenance Plans, Work Centers, Task Lists and PRTs
-Maintenance Plans
> >Define Number Ranges for Maintenance Plans
> >Define Number Ranges for Maintenance Items
Alternatively use transaction IP20 and IP21.
In the case of maintenance plan number range you must assign each category to a particular number range. Use the icon 'change groups' to do this.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

I have an email thread that has become unprintable (and in some cases unreadable) because each email in the thread is indented and eventually the text is very far to the right margin and even beyond. How do I correct this?

I have an extremely long and important email thread that has become unprintable (and in some cases unreadable) because each preceding email in the thread is indented and eventually the text is very far to the right margin and even beyond. Some of the text is even showing up as only 1 letter per line. I tried selecting all and then left justifying it, thinking that that would shift everything to the left, but it didn't work. When I go to print the thread, it shows as 344 pages, which although long, I can't believe it's that long. What do you think happened to cause this and can it be corrected?

Ick. So it can't just work sensibly? Sensible would be either autosave overwrites previously autosaved versions or all autosaved versions would be deleted when the message is finally sent. Allowing previous message versions to accumulate endlessly might be beneficial to someone, but does not seem like sensible default behavior.

IPod Classic 80GB - "iTunes library cannot be saved you do not have enough access privileges for this operation" It says it has synced but it hasn't. Help please I am not very tech minded

iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.

See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

When i search for a website it takes me to another website. I will click on the link and it takes me to one ive never wanted? please help very frustrating! I am not very computer savy, is it my settings or something? Jen

When I search for a website it itakes me to another website. I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy! Thanks! Jen

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

HT2105 Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Not a solution yet, but received the following from one of the tech people I've been e-mailing back & forth with.
"I'm sorry that you have been unable to submit your podcast. The podcast submission form is currently offline. When trying to submit the podcast you will receive this message "We are Currently Experienced Technical Difficulties". Once the issue has been resolved, I would be glad to inform you.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
Who knows, maybe the problem isn't with my feed after all.

WRT160N v3 Ultra Range - range not very far

Similar Messages

Maybe you are looking for