WRT160N WiFi Problem's when connect to Roku XDS

I have a Roku box which is connected to my router WRT160N on wifi and I have a down speed of 12.1mbps but my roku box loads files very slow and re buffers , but when I connected to direct wired I worked well.
I think that my router WiFi does not support the live streaming to roku or any other devices my roku works well on recorded streams like netflix and Pandora hulu and so but apps like yupputv which streams live from India does work well on WRT160N WiFi router but this yupptv app on roku works well when wired so I decided to go for a new router which is more powerful an WRT160N
But when I looked at Linksys i could not decide which is a better WiFi device to stream live movies. Can anyone help me out fixing this issue i have or suggesting me for a new router ?

You can try changing the advanced wireless settings on the current router.
Open the setup page of the router. Click on wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
Go to the setup tab. Change the MTU size to 1365. Save the settings and power cycle the router.
See if that makes any difference.
Did you try to update the firmware on the current router? If not then try to update the firmware on the router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.
If you want to go for a new router, you can try Linksys E3000 router. The Linksys E3000 is a powerful dual-band Wireless-N router optimized for wireless entertainment. Connect your Blu-ray players, DVRs, and gaming consoles, and enjoy the smoother and faster HD video streaming and wireless gaming performance that simultaneous dual-band technology enables.

Similar Messages

10.5.8 wifi problems even when plugged. Update won't run.

I have a late 2008 13" macbook.
The wifi connection does not work properly since the upgrade to 10.5.8
In my case, it doesn't even work when the AC adapter is plugged in.
Sometimes (just sometimes) wifi works for about 2 minutes right after booting or being connected with ehternet. Most of the time, ping to router returns "no route to host" or ~12000ms with 60% packet loss.
I have tried all the fixes suggested on the web, and downloaded the package apple just released (it didn't appear on software update). It said it was not for my hardware.
I also tried using pacifist to force the install of the update, but didn't help.
I hope this helps to identify the problem.

*raises hand*
Another instance here...
MacBook 5,1 (Al Late 2008 2Ghz) - after the 10.5.8 update I had this issue as well. Airport could not connect to my wireless router even though the menubar airport icon showed a good signal and my wireless network name appeared below. I received the "internet unavailable" message and could not even bring up my router's management webpage using it's ip address. I also received the "self-assigned airport ip address text" as the previous poster mentioned. This occurred both on the battery and plugged in.
I attempted the 10.5.7 airport kexts switcheroo suggested by others but could not get them to install properly. Finally, I reinstalled via my original install disks (with 10.5.5) and used a saved copy of the 10.5.7 combo updater to get back to a 10.5.7 system. Airport now works properly again.
Like the others above, my MacBook will not take the Airport Updater as it is not in the proper hardware range. Also, the latest security update (the DNS one) will not install either, presumably because it requires 10.5.8.
Suggestions? (besides keep working on this please, Apple!)

Wifi gets down, when connect to my MAC

When I connect my MAC to my wifi's home... the wifi connection gets down...(the network appears and disappears in all of the devices that are already online)... I must restar at least 2 times the MAC to get connected.

I'm suddenly having a similar problem: I'm running Mac OS 10.7.3, iTunes 10.5.3 and iOS 5.0.1. When I plug in my iPhone, system.log reports:
Feb 18 16:29:51 lianaslaptop com.apple.launchd[1] (com.apple.usbmuxd[685]): posix_spawn("/System/Library/PrivateFrameworks/MobileDevice.framework/Versions/ A/Resources/usbmuxd", ...): No such file or directory
Feb 18 16:29:51 lianaslaptop com.apple.launchd[1] (com.apple.usbmuxd[685]): Exited with code: 1
Feb 18 16:29:51 lianaslaptop com.apple.launchd[1] (com.apple.usbmuxd): Throttling respawn: Will start in 10 seconds
When I go to that location, sure enough - there is no usbmuxd. I haven't been messing with my system, I've never poked around in places like this!

Wifi turns off when connected to mobile card, but wont turn back on

I have a Sprint wireless internet card. When I connect to the mobile card, the Wifi radio turns off. I'm fine with it turning off while I'm connected to the mobile card, but the problem is that it wont turn back on when I disconnect the mobile card. If I try to use the button or other basic on/off switches in windows to turn it on, they wont respond. The only way I can get it back on is to run a troubleshoot, which shows that the radio is disabled and asks if I want to apply the fix that will turn it back on.
I'm on a Toshiba Satellite A665-S5170, Windows 7 (64), in the U.S.
Thank you.

Hi
So does this also happen if you dont connect the notebook to external monitor? So you can determine what is causing this problem.
If the notebook doesnt shut down without external monitor you should try to update the BIOS and display driver. Both updates you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Do you close the lid if you have connected the external monitor?
What OS are you using?
Furthermore it would be interesting to know how you cleaned the notebook. Therefore I use compressed air spray that can blow out the dust from the cooling ventilators and you must not disassemble the notebook.
Bye

Wifi problem with the connection of The New Ipad (4G)

I just bough the new ipad ( 2 weeks ago), when i'm at home i usually use wifi connection and it goes w\o problem.
But today after the battery empty, i rechard it like i do,
and while recharing it i tried to update my skype and line apps so i notice this my update went slowly than it usually takes
(it took 20 - 30 mins for one update to be done). I thought
it was because of my internet, so i checked it with my pc but with the pc the internet goes without the problem.
I check other apps again (like youtube, facebook and such..) but everything same so slowly but it has connection.
but with Line it said "please make sure you have internet connection"
so is there anybody who has the same trouble? or any solutions?
thanks lot and sorry bad grammar

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

WRT160N Router Error message when connecting wireless

This is the advanced error report I received after diagnosing my connection. Everything I have tried to do has not solved my problem. Please Help! Thanks
Helper Class (RNWF MSM Helper Class) Event:
Wireless Diagnostic Helper Class Event
For complete information about this session see the Wireless Diagnostic Informational Event.
Helper Class: Native WiFi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 0c5fedf8-83c2-45eb-a664-bc2385294b58
Interface name: Intel(R) Wireless WiFi Link 4965AGN
Interface type: Native WiFi
Profile: DaveJeremyCameronBen
SSID: DaveJeremyCameronBen
SSID length: 20
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: Problem found
Root cause:
The wireless settings for the network adapter on this computer don't match the settings of "DaveJeremyCameronBen"
The selected data rate is not correct.
Detailed root cause:
802.11 connection failed due to status code 18: Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter
Repair option:
View the wireless network adapter settings on this computer to verify they are compatible with this network
If you set up or own this network, you might be able to fix the problem by changing the settings on the wireless router or access point to be compatible with the settings on this computer. Contact the network administrator for "DaveJeremyCameronBen" or your hardware manufacturer for further assistance.
Event Verbosity:0
Solved!
Go to Solution.

I think there is a profile saved on your wireless computer.
What is the operating system on your computer ?
Delete the profile on your wireless computer. I think you are using the intel wireless adapter on that computer.
Open the Intel wireless adapter utility. There you will find the profiles saved on your computer. Delete the wireless network profile that you are trying to connect.
Now open the setup page of the wireles router. Go to the wireless tab. Check the wireless network name. Click on wireless security tab and check the wireless security settings. Make sure that you have the correct network key/password.
Now try to connect to the wireless network again.
If it is windows XP operating system then you can also connect to the wireless network using the windows wireless network utility.

IPad mini wifi problem - "Unable to Connect"

I have an iPad mini and the WiFi disconnects as soon i go little far from wifi router, it always says "Unable to Connect", As soon i come near by it connects, that too it should a distance of 1 meter or max 2, if you move from that distance it disconnects, occuring same in office and at home. I have reset all setting and network setting too.

Reboot your router by unplugging it for a couple of minutes, then try to reconnect when it comes back up.

Ipod Touch-WIFI Problems-Can't Connect More than One at Same time

I'm not an Ipod Touch user yet, but three family members are. Unfortunately, only one will connect to the Internet on our home wifi at a time. Each one works just fine on its own and will make the connection, but if one is already turned on it blocks the others. I have a laptop and it connects fine regardless of the Ipod Touch issues. I'm using a Linksys router if that matters. Looked everywhere but can't find someone experiencing similar issues. Thanks for any ideas/thoughts/help!

Take a look at your router's settings for DHCP. Normally there is range associated for the allocation of IP addresses for wireless devices. For example, you would set DHCP to on, IP address range from 192.168.1.10 to 192.168.1.128. The normal defaults on the router should have given you an adequate range of address but you may have inadvertently changed something.

IPad iOS 4.2.1 WIFI problems (Server cannot connect)

my iPad is experiencing problems where after 5 minutes of browsing pages stop loading and I get an error saying cannot connect to server. any ideas? my router is lnksys and this is getting really annoying to renew cache evey 3 minutes.

Welcome to the Apple Discussions.
One solution that has helped some users of Linksys and Belkin routers in particular is to power cycle the router. Make sure it is completely shutdown, not just reset.
Then reset the network in the iPad.
And if the problem persists, change channels in the router, there may be interference from another network causing part of the problem.

Windows 7 thinks my phone is my wife's phone when connected.

Not sure where to post this. I found one other person with this issue after I Googled it but no solution. Long story short - we have 2 iPhones in the family and 2 separate profiles set up on the PC with Windows 7. When I plug my phone in via USB on my profile, the auto play window pops up (to view files or import photos) and it displays my phone with the name of my wife's phone. In Windows under "devices" it is also recognized as my wife's phone. Before iOS5, Windows used to differentiate between our two phones and displayed our different phone names correctly. Now both phones show up as the name of my wife's phone. Anyone else run into this issue after iOS5?

Sadly, no. It shows up as a "portable device" and a "digital camera." I can go to properties and highlight the incorrect name, but cant edit it or delete it.
I found this with a Google search:
You can change the name text in the '[Strings]' section of the .INF file included with the driver (edit it with Notepad), then run the setup.exe. Windows will then display that name in "Devices and Printers" and "Device Manager".
Meh. I like Apple because 90% of the time you just plug it in and it works without issue. I'm not comfortable editing .INF files. I shouldn't have to. I'd be curious to know if this issue is happening to Mac users after the iOS5 update. I wonder if it has to do with the Apple Mobile Device USB Driver that was automatically installed after I updated her phone to iOS 5. I did mine first and then hers. Perhaps if I updated my phone after hers it would display only my phone name for both phones.

Wifi problem -- unable to connect to server SOLVED!

After trying all the methods suggested by people here, I finally can get my ipod touch connected to the internet and watch Youtube! Hurray.
I use linksys WRT54G router. I have tried the following methods but in vain:
(1) disabled the security
(2) disabled the mac filtering
(3) reset the router, reset the ipod
Finally I did it by:
(1) upgrading the firmware to 1.02.4 (I haven't upgraded the firmware for a long time because the wireless works fine..don't bother to change anything). Just go to www.linksys.com and find the right upgrade file.
(2) Change the WPA2 from TRIK to AES.
Then it works fine. Got the IP, subnet mask and DNS automatically.
Thanks for those who have contributed here!

you could also use WEP security as many ppl cant use AES or TRIK or WPA2..
Also could you mark this solved??

Mail sends via Hotspot connection but not when connected to wifi

Hi guys and girls,
Really hope you can help. I have the new iPad 3 wifi only. When connected to wifi at work, home or a friends I can recieve mail absolutely fine however if I reply or try to send an email it will not send and I recieve an error message.
However, if I disconnect from the router at work home or at a friends and turn my iPhone into a hotspot using 3G network and connect my iPad to this then mail sends perfectly??
Any suggestions would be great!
Regards
Mark

What is the error message?
Who is the email account provider for this email account and does the email account provider have an authenticated SMTP server?

Limited connectivity/Yellow Caution sign when connected.

Hi,
I am using the cisco linksys E1200 WiFi router.
when ever I connect my laptop to WiFi, its show Limited connectivity/Yellow Caution sign when connected.
I try to reconfigre it & also in factory default mode it show same.
Please help me.
Regards,
Milan Verma

Hello Milan,
The E1200 router is a Cisco home product, the question may be better suited here-
http://homecommunity.cisco.com/t5/Wireless-Routers/bd-p/Wireless_Routers
A couple things you can try to check-
If you connect your device directly to the router, do you have the same problem?
When connecting wireless, what IP address do you receive (169.254.x.x or 192.168.x.x)?
Are you connecting to the correct wireless network?
When running the connectivity diagnostic tool, what does your computer report as a problem?

K3011 windows 8.1 upgrade fixed Wifi problem

I just upgraded my K3011W from Windows 8 to Win 8.1 after I suffered under major Wifi problems. Poor connectivity or lost signal. I did an inplace upgrade to Win 8.1 Pro but at first the Wifi problem remained -no connectivity at all.
Then I found the broadcom driver package sp58848.exe at the HP website
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=de&lc=de&dlc=de&tmp_geoLoc=true&software...
which finally was the breakthrough.
After windows update everything runs just fine!

I am going to have to try this. My problem with the Broadcom at this point after Windows 8.1 is that there is no longer a "Power Management" tab in the Broadcom properties, so everytime the tablet sleeps it turns off wifi, irritating. You almost have to run the tablet with no sleep which really kills the battery.
But it makes sense there would be a Broadcom driver for a Lenovo tablet on an HP site. Jeesh.
t-netguru

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

WRT160N WiFi Problem's when connect to Roku XDS

Similar Messages

Maybe you are looking for