WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Similar Messages

NetBoot images are not showing up in the Startup Disk window

I have created a few Netboot images, enabled them and placed them in the correct place.
They don't show up in the Startup Disk window.
I have noticed that bootparamd is not running, and that after a while also bootpd disappeared.
Strange, no?
(I started them back up and it didn't make a difference.)
Message was edited by: marc herman

It looks like the NFS exports has separate entries for both:
/Volumes/xxxxx
/Volumes/xxxxx/Library/NetBoot/NetBootSP0
and that's not allowed. You can't separately export a directory and one of its subdirectories on the same file system.
It sounds like maybe the Server Admin tools are confused. If you don't really need /Volumes/xxxxx exported, then I think just deleting that share should fix things up.
If you can't get the tools to straighten things out, you could override all the NFS exports with your own defined in /etc/exports. There's an exports(5) man page that describes the format and creating an /etc/exports file will override anything in NetInfo (10.4 and earlier).
If you want to export both directories, they just need to be listed in the same exports entry, like:
/Volumes/xxxxx /Volumes/xxxxx/Library/NetBoot/NetBootSP0
This causes the "/Volumes/xxxxx" file system to be exported and allows only the directories "/Volumes/xxxxx" and "/Volumes/xxxxx/Library/NetBoot/NetBootSP0" to be mounted.
HTH
--macko

My photos are not showing up in the 'Open File' window

When I try to access my Aperture library through the 'Photo' button on the left hand column of the open file dialogue box, I see an option for aperture but it brings up an incomplete version of my library. There do not seem to be any other versions (or older versions) of my Aperture library floating around on my computer. Is this a refresh problem? Is there a way to force a refresh? Any help would be greatly appreciated.
Thanks,
Joel Richards

Bob,
I have had may similar problems lately, as I experiment with putting photos on my iPad and iPhone. (iTunes uses previews from Aperture, and the media browser (File -> Open) uses previews too.)
It seems that something went haywire with Aperture's preview generation in the last year. All I can suggest (from my personal experience) is to select all the photos you want, delete the previews, close Aperture, restart Aperture, regenerate the previews, close Aperture, restart Aperture and then do a couple different random things while waiting to figure out what happened.
I don't mean to sound unhelpful, but that actually is the set of steps I follow when trying to figure out what's wrong with my preview sharing.
nathan

My Websites are not showing up on the Creative Cloud Control Panel

Hi guys,
For some reason, just recently, my websites that I have hosted with BC, that I have built for clients, are not showing up on the right control panel? Usually when I load up CC, it shows the Website text as ...loading, then my sites appear... now, nothing.
Help!?
Thanks,
Aaron

This seems to be a bug with Creative Cloud. I am encountering the same issue. We've gone ahead and notified the product team, but for now, you can access your websites by directly logging into Business Catalyst: http://www.businesscatalyst.com/admin/Index.aspx. Use the same log in information that you use for your Creative Cloud memberhsip.
Thank you for bringing this issue to our attention! Hopefully we'll get it sorted out soon.

Why available Lan Host not showing up in the DHCP Leased Client table for RV180

I just purchased the RV180 and am puzzled as to why lan host with ip address of 192.168.1.102 not showing up in the DHCP leased clients list.
I have 4 static ip addresses with the last 3 digits ending in 101, 102,103 and 200 listed in the static DHCP and available local network list, but 102 is not in the DHCP leased clients list. The other 3: 101,103 and 200 are.
Should it not be there also?

Thanks Marty,
There is nothing different about 102 than the other hosts.
I did talk to tech support at Cisco this morning and I was told that I should not use the static DHCP under Networking LAN. Instead, I should set the static IP at the device level.
So under Static DHCP, the list is blank, but the IP address will show up under Available LAN Hosts and listed as Static as Type.
I thought this is a bit strange since it is Static DHCP and should be under Static DHCP (?)
George

My contacts are not showing up on the PC app or the web interface. Why isn't this working?

My contacts are not showing up on the PC app or the web interface. Message+ works fine on my Note 4 though. My contacts are saved in my Google account.
I've tried several things but message+ acts like there are no contacts in the app yet there are names and pictures in my conversations. Can anyone help me?

matthttam,
Let's make sure that we get you up and running with no issues. I want to make sure that we are on the same page. Are your contacts actually listed in the address book on your phone? Are you using Verizon Messages? Or the third party Messages from the Play Store? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

My pictures are not showing up at the email accounts I am sending them to from either of my iphones

I take photos from both my 4 and 5 iphones and they are not showing up to the email addresses I send them to. Help!

Do you know where the folder should be?

Calendar invites are not showing up in the Calendar Inbox

Calendar invites from Google Calendar are not showing up in the iPhone Calendar Inbox. They do show up in the actual iPhone calendar (greyed out waiting for a response) but if you are managing multiple invites it's very important to view the invites especially if dealing with multiple invites on different days. This is affecting users with Iphone4, 4s and 5 on multiple iOS's.

Sorry for the late reply, it is still an irritating issue. Apple says it's Google's poblem. Google thinks it's Apple's issue. Extremly irritating.
I tried setting up the Calendar using the Exchange presets but that did not solve the invitation problem.

I tried using the Filmstrip Theme for a podcast but when imported my Powerpoint slides as photos into iMovie they are not showing up in the project?? How can fix this??

I tried using the Filmstrip Theme to make a podcast and when I tried importing my Powerpoint slides as photos they are not showing up in the podcast, they are showing up as black or blank, how can I fix this??

This may help:
How to add a Powerpoint presentation to iMovie:
http://www.wikihow.com/Add-a-PowerPoint-to-iMovie

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Sorry, don't know what you are asking. You have an old iPad Mini 3 and a new iPad Mini 3? How did you set up the new iPad? Did you restore it from a backup of the old iPad? What photos are you not seeing?
Cheers,
GB

HT1296 Calendar items created on my Iphone 4S are not showing up in the Calendar on my MacPro after USB Sync.. even though they are still on the phone... ideas???

Calendar items created on my Iphone 4S are not showing up in the Calendar on my MacPro after USB Sync.. even though they are still on the phone... ideas???

In the Event mode use the View ➙ Sort ➙ By Date ➙ Decending menu option. Then the latest imports will be near the top of the Event window (depending on when the photos were taken of course).
Or Control-Click on one of the thumbnails in the Last Import album and select Show Event from the contextual menu:
OT

Why my sent emails are not showing up in the sent box

The emails I'm sending are not showing up in my sent box. Why is this happening?

- Did they show before?
- Are you sending from the mail app?
- Try sending from another account.
- Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Refinements are not showing up under 'Add/Modify Location' window

Hi All,
Our Indexed data as seen in JSP Reference application contains multiple dimensions. But when trying to add a trigger using the 'Add Location' button in Endeca Experience Manager, the indexed dimensions are not showing up under the 'Refinements' section in the pop-up window. But when we try to use the RefinementMenu cartridge as part of configuring the Guided Navigation section, the indexed dimensions are showing up.
Please let us know if we should be doing anything else, so as to get the dimensions in the 'Add Location' window.
Thanks & Regards,
Shabari

Try logging out, running ./control/update_web_studio_config.[bat|sh], then logging back in and see if that helps.
Michael

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.

There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

Similar Messages

Maybe you are looking for