WRT160NL: Howto access storage media via internet?

Hi and a nice day for everyone.
I frequently have to move data from between two distant LANs, which I currently do with a travelling USB-Stick.
I wonder, if I could use the the storage link to make things easier. I could access the router via DDNS, but how can I transfer the data? I run debian GNU/Linux .
Can please someone give me a hint?
Thank you all
Karlheinz Herrmann

Printed incorrectly? Just like that? Come on....... Cisco still has on line the product sheet and the web page and hasn´t change a letter. This really is starting to make me think on getting my money back, is not fair and not even legal!!
jjohnston7 wrote:
Nevermind. Talked to Tech support, and they said all the packaging and user manuals were printed incorrectly and FTP is not supported.
I wonder if there is an FTP client you could install in the USB drive its self that would work, or if that wouldn't work due to it being in a USB port not a network port...
if you can´t get a single file over the internet, what makes you think that you could be able to access an ftp application?

Similar Messages

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

Unable to access FTP Site via internet

Hello All,
Here is a problem that I'm facing accessing my home deployed FTP Server on Windows 2008 Server via internet. Below is the description of setup at my home.
1. I've a private network behind D-link DSL 2750U router.
2. I've forwarded Port 21 to my FTP Server in private network (FTP Server IP: 192.168.1.2)
3. FTP Site is deployed in IIS 7.5 with Anonymous access rights (so obviously no username and password is required to access it).
4. In IIS 7.5, FTP Site binding is set as "
5. I'm able to access my ftp site within private network (via command prompt and any browser).
6. I've registered a domain name ftp.tx-fr.tk for my FTP site so that I can use it from outside world and here are settings.
7. I'm able to ping this (ftp.tx-fr.tk ) domain name.
8. All firewalls are disabled for testing purpose (Will implement security later, once primary issue resolves).
Now here is the problem, whenever I type in ftp://ftp.tx-fr.tk in my browsers,
IE 9 and Chrome prompts for username and password, whereas Mozilla throws a message as "421 Login Incorrect".
Same happens when I use command prompt to access the FTP site using domain name.
Here is the funny part, when I'm prompted for username password, I typed in router's credentials (U:admin, P:admin) and I get
"Internet Explorer cannot display the webpage" in IE 9, "421 Login Incorrect" in Mozilla.
Whereas when CMD is used to access the site, I'm able to log in using router's credential but none of the command executes
Now is there anyone who can assist me resolving this case?
Kind regards,
Aniruddha

I would have ask in IIS forums: http://forums.iis.net/
Thanks

Accessing peoplesoft portal via internet, outside of your org network

Hi,
I want one component of HRMS to be able to be accessed outside of the network over the internet.
It would be great if someone could give the steps needed to achieve this.
PeopleTools 8.48
Thanks,

Hi Saurabh,
it is bit complicated.
As you Expose FQDN is different and you internal FQDN is different , you have to make some workaround.
Follow below steps.
1.
   The system which you have created on EP for calling backend system , you have make changes all in that.
    Changes mean every where in system where you have maintain the host name portal.server.com has to be replace by static.ip.com , by this changes when you will call the BSP from portal, it will redirect to http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html
2.
Now the problem is that when you will try access the portal from you internal network through URL :- http://portal.server.com:50000/irj/portal and when you will click on BSP , it will indirectly go to internet to resolve the URL :- http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html which is becuase we have made chnages in the system above.
From internal network if you have to resolve URL http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html then you have to make the entry in host file which is like below
static.ip.com              123.123.123.123
From above workaround your URL will resolve from internet as well as from your internal network.
This is all becauase you have dual stack , you have difference in FQDN.
Any query pls reply.
Thanks
Anil
Edited by: Anil Bhandary on Oct 13, 2009 2:50 PM

Access Remote Webservice via Internet

Hi all,
Iam new to Web Services ...
Could any of u give me an Article or Code ... how could we access a basic webservice from Java ..... which is available remotly.
plz help me .. tks in advance...

abp_JavaPrg@mdu wrote:
I got the same error while I trying to connect the server in that port via ssh.I know ssh is "the new telnet", but I did not say telnet to be retro. ssh does encryption stuff, telnet does not. For checking that a port is open and (if the server sends at least the handshake in a human readable format) checking that the server you think is running is running telnet is a better option.
From the sounds of it the application you think is running is not running.

Using Bex Analyzer via internet

Hello experts,
I have BW 3.5 and do not have portal. I want users travelling in various locations to access / run queries via internet. Some queries are static (updated once a day) and some are dynamic (structure updated every 15 min). What all steps do I take to acheive this?
Any help would be rewarded with points.
Thanks
UV

Hi UV,
Ok..Here are the steps to create a simple web report:
1. Create a quesry on your cube. Goto bex analyzer and just drag and drop a few chars in the rows and columns sections and save.
2. Now goto start -> programs -> business explorer -> web application designer.
3. In the WAD drag and drop table web item (you would find lots of them like table, chart, etc..) to the rightr hand side.
4. Now below the web items you would find the properties tab. Now in the properties for the table select the query that you created. Save.
5. There is a button in WAD to execute the report in browser. Execute and check.
Bye
Dinesh

Issue with Accessing Home Media DVR via web

I recently had Fios installed (TV, Internet, Phone). Everything seems to be working fine so far. When I try to access my Home Media DVR via the web portal, I get time out messages, and errors saying that the DVR isn't responding. I get similiar errors when I try to access the DVR via the web browser on my phone as well.
Also, when Verizon Central (or whatever the web portal is called) tries to gather the information from my set top boxes, it tells me that it can't get the information from my Home DVR box.
Any issues/fixes on this?? Please help.
Thank you,
Sean

Sean1999 wrote:
I recently had Fios installed (TV, Internet, Phone). Everything seems to be working fine so far. When I try to access my Home Media DVR via the web portal, I get time out messages, and errors saying that the DVR isn't responding. I get similiar errors when I try to access the DVR via the web browser on my phone as well.
Also, when Verizon Central (or whatever the web portal is called) tries to gather the information from my set top boxes, it tells me that it can't get the information from my Home DVR box.
Any issues/fixes on this?? Please help.
Thank you,
Sean
For this it seams like the boxes are able to be seen by verizon.com/fiostvcentral if that's the case you can try powercycling the router, and the cables boxes, and then trying it again. If that doesn't work you will have to call the vz tech support. 888-553-1555.

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Problems accessing iTunes media folder on external drive via Mac

I have recently got a Mac Book Pro and assumed it would be easy to access my iTunes library - which I store on a Buffalo external drive and normally access via my Asus vivobook laptop running windows 8 - by simplying plugging the external drive into the Mac Book Pro, opening iTunes while pressing on the Option key (as I understand it is called) and then selecting the iTunes library .itl file when invited to choose a library. However, when I do this, I get a message saying that "the .tl file is locked, on a locked disc or I do not have write permission for this file".
If I click on the .itl file in the external drive via my Mac, it takes me straight into iTunes but, of course, without any of the content of my iTunes media folder.
I can access the media on the external drive when it is plugged into my Mac and am not aware of ever having introduced any restrictions on the library .itl file (I normally switch the external hard drive between my Dell desktop and my Asus laptop).
I have restarted my Mac Book Pro and quite iTunes etc. I also have the media folder correctly identified on the external hard drive in my iTunes preferences, Advanced Settings.
I would be most grateful for any ideas as to what could be the problem here.
Thank you (in anticipation).
Best,
Michael

Get info on the drive. Check the format. If it says NTFS it is a format that Macs cannot write to, only read, unless you install special software. It is a common issue with using Windows drives on Macs. "Locked" may mean iTunes cannot open it for full use since it needs to write to the library file as well as read it.
Your solution may be to reformat the drive to something a Mac can use fully too, such as FAT (beware file size limits with large video files). or trying to work with a NTFS driver for Mac.
NTFS drivers for Macs (there may be others):
Paragon NTFS - http://www.paragon-software.com/home/ntfs-mac/ - recommendation: https://discussions.apple.com/message/18708633
Tuxera NTFS 2012.3.2 - http://www.macupdate.com/app/mac/33122/tuxera-ntfs
NTFS for Mac OS X 9.5.3 - http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://macntfs-3g.blogspot.com/ and http://i.vishalagarwal.com/post/30387627819/ntfs-write-on-lion-or-mountain-lion

How to get "Easy" access to my Time Capsule files via Internet?

Hello,
I like to have a easy solution to acces my TC 2TB via Internet.
I saw there is an easy way, if you have an MobileMe Account - but this service is since Lion, icloud and iOS5 not longer avalible.
Does anyone know how to get easy acces without DynDNS, FTP or other difficult solutions or does anyone knows a solution which will be avalible in the future?
Thanks
Flo

Thanks for your fast answer.
But as mentioned in THE NOTE my TC is a downstream router behind another router. The reason is that I am connected to the internet via Telekom entertain 16000 with an DSL/Modem/Router which one I need to connect my media Receiver.
So is there a following solution which replaces the MobileMe Solution.

Web Dynpro application accessed via internet?

Hallo
We should develop one Application, but it should be accessed via internet. Our Personal System and Material System ist from SAP. Thus we want to did the GUI in Web Dynpro for Java.
I'm not sure if the WD runs on internet? And ist it ture that SAP only good for the intranet application? Have you any example to solve the problem such as authentication and autorisation for the service (using adaptive Web Service)?
Thanks a lot and
Nice regards
ping

WD Java Apps can be accessed outside Intranet for example companies expose their ESS/MSS applications(WD Java apps) on the internet for their employees and managers. However you need to check for browser compatitbilty depending on the Portal SP level you are using. WD Java many not be supported by all browsers and versions.
Hope this helps
Siva

Web dynpro abap application on Portal does not work via internet access.

Dear All,
I have created a web dynpro abap application and deployed the same on Portal.
The issue I am facing is that the webdynpro application works fine when the end user logs into Portal from Local Network,
However when the Portal is accessed from outside the local N/W via Internet, Portal is working fine for other applications like ESS
but the web dynpro application dont work.
Is this some configuration issue on the portal / abap development or any workaround is possible.
Regards
Abhinav Dagar

Hi
Please try to use the [HTTP Watch 5.0 Basic |http://www.httpwatch.com/download/] tool to trace that WD Application link from the portal and you can easily find out the problem.
Regards
Prakash T

Cant access my portal applicaion via internet

hi
i have installed 10.1.0.2 OAS infrastructure and middle tier "portal and wireless"
OS = win 2003 server
/etc/host file I have included 10.132.12.132 myservername.dpw.gov.za mytest
my machine is on the domain=dpw.gov.za
i have created page_group named PG_myapp and configure it to be accessed bu public user"checked display to public users "
i can access the pagegroup by using http://myservername.dpw.gov.za/portal/page?_pageid=33,1&_dad=portal&_schema=portal on:
1.the machine/pc that the apllication(OAS) is installed ()
2.the machine/pc that is on the same domain as myserver= copying the page group url and paste it on the other machine that is on the same network and share the same domain
my problem is: i cannot access the same url/pagegroup using my laptop (not on the domain) uses mobile connection to the internet
my aim is to create application that will be access by users via network and internet sitting in different provinces
please help, what do i need to do
thanks
user599495

hi all
i got my answer, its a departmental/organisational issue
they need to put on the production and configure url(after testing the app on test machine )then give the url to outside user to access the app
thanks

I cleared a playlist on my iPhone 4 because I wanted to remove the songs from my phone's storage (I had previously downloaded them) because I wanted to clear storage space. I now want to access the playlist via iCloud and can't. Thoughts?

I cleared a playlist on my iPhone 4 because I wanted to remove the songs from my phone's storage (I had previously downloaded them) because I wanted to clear storage space. I now want to access the playlist via iCloud and can't. In other words, I want it to sync with the playlist as it exists in iTunes Match. Thoughts?

Export Photos and Videos from Camera Roll to your computer.
Empty Camera Roll.
Make a Folder/Album with all photos and videos you want to have in your iPhone and sync them through iTunes.
This will free up space in your iPhone and your iCloud.
The backup of Camera Roll in iCloud is only to restore your iPhone. You can't access them directly.

WRT160NL: Howto access storage media via internet?

Similar Messages

Maybe you are looking for