WRT160NL - reset/reboot through web interface

Hello there,
Is it possible to reboot / reset the router remotely by using the web interface? On SMC routers that option is available and is of great value.
I'm using my WRT160NL with a usb hub (powered) so I can connect 2 hard drives at the same time. Yesterday I had a problem (hard drives disappeared) and I had get physically to the router to unplug/re-plug the usb hub so I could see the drives again (if i was not at home that would be a pain).
Thank you

Hello, I just went through a factory reset of my new WRT160NL router because I could not log my MAC machines onto it. It was reset, setup with WPA and my MAC does see it but when I type in password, I get an error message that it is an invalid password. Now, when I connect to my IBM laptop, it sees it, asks for key and then allows me to connect. How can I get my 2 MACs to recognize and use the new router?
Cisco Account Manager- Services

Similar Messages

Add users to OpenDirectory through web interface??

Is there any way to implement a solution where people can create an account on my OpenDirectory server through a web interface instead of having to go through the OS X Server application?

Not an answer, but maybe some pointers to how this'd probably work when you write your own... Haven't seen such a tool and don't see one posted anywhere, but wrapping a CGI script around the command line user creation tools shouldn't be that difficult, likely starting from this Apple user-creation script, and invoked via CGI.
Probably the most challenging part of all of this work will be getting su_exec installed, configured and working within OS X Server, or you'll have to figure out how to communicate between the web form and something with administrative access to the directory server; of getting the Open Directory access necessary for the user creation.
I've built an application allowing users to anonymously request a login (for another platform, not web based and not tied to Open Directory), and it can be a decent-sized development project by the time you add in error checking, logging, the inevitable forgotten-password-reset support, and related features.

HP LaserJet 400 MFP M425dn: bug in MTU path discovery, printer reboots via web interface

Firmware Datecode: 20121205
1. We can not access this MFU over VPN link. Otherer devices are accessed successfully.
As far as I understand there is an error in MTU Path Discovery.
tcpdump logs are attached.
Is there a way to change MTU of this device?
2. This MFU a reboots when I open page "Settings" of "Networking" submenu (/hp/device/set_config_networkSettings.html?tab=Networking&menu=NetSettings) if option "System" -> "System Setup" -> "Language" is "Russian". But this looks like a very good feature since I've have not found the way to reboot this printer remotely.
Here I was tring to access web interface over VPN (IPSec), 192.168.4.135 is IP of my comp, 192.168.160.200 - is IP of MFU, 192.168.160.254 is a gateway:
$ tcpdump -n -r printer-1.pcap
reading from file printer-1.pcap, link-type EN10MB (Ethernet)
17:20:29.337867 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [S], seq 2356029847, win 8192, options [mss 1460,nop,nop,sackOK], length 0
17:20:29.338026 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [S.], seq 614551948, ack 2356029848, win 8760, options [mss 1460,nop,nop,sackOK], length 0
17:20:29.344909 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [.], ack 1, win 64240, length 0
17:20:29.348488 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [P.], seq 1:304, ack 1, win 64240, length 303
17:20:29.348564 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], ack 304, win 8457, length 0
17:20:29.378872 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [P.], seq 1:513, ack 304, win 8457, length 512
17:20:29.379063 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379100 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379103 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379135 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379251 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1:1461, ack 304, win 8457, length 1460
17:20:29.379272 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379274 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1461:2921, ack 304, win 8457, length 1460
17:20:29.379304 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379306 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 2921:4381, ack 304, win 8457, length 1460
17:20:29.379335 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379338 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1:1461, ack 304, win 8457, length 1460
This is more detailed view on some packets.
$ tcpdump -nv -r printer-1.pcap
17:20:29.379063 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x7233 (correct), seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379100 IP (tos 0x0, ttl 64, id 62678, offset 0, flags [DF], proto ICMP (1), length 68)
192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379103 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x5edf (correct), seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379135 IP (tos 0x0, ttl 64, id 62679, offset 0, flags [DF], proto ICMP (1), length 68)
192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379251 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x0c1c (correct), seq 1:1461, ack 304, win 8457,
P.S. This thread has been moved from LaserJets to Multifunction and All-in-One - HP Forums Moderator

John Getzke wrote:
Its hard to understand what you are trying to do or ask here. We have some offices connected via IPSEC tunnels. IPSEC interface's MTU is 1280 bytes (not 1500 bytes as Ethernet). All other devices successfully work over this VPN link. HP m2727 works. HP m425dn does not work. As a network administrator I've traced source of problem on all possible points and found that HP m425dn has a bug in the "Path MTU Path discovery" routine. The logs I attached shows that any packet of the TCP stream that the printer (160.200) sends to host (4.135) has "Don't fragment" flag set. According to IP standard the router HAVE TO discard the packet with DF flag set and size bigger then MTU since it can not pass a packet further without fragmentation - IPSEC MTU is 1280 bytes only while HP sends 1500 bytes. The router informs the printer about this problem with ICMP message Type: 3 (Destination unreachable) with Code: 4 (Fragmentation needed) suggesting MTU of next hop: 1280. The router does not communicate with the printer itself, it just informs the printer about network problem. According to IP standard the printer HAVE TO resend this data with the size of packet decreased according to suggested size. This is expected behavior of the Path MTU discovery routine. But the printer sends the packet again with the same size and DF flag set. The router again discards the packet and informs printer... This cycle repeats again and again until connection is closed due to timeout. Therefore "Path MTU discovery" routine is broken at this device. It would not be a serious problem, but the printer resends packets at rate over 28000 pps (about 40 MBytes per seconds) and its CPU is so heavily loaded that it even does not respond to touches on its touchscreen. So an innocent attempt to print document on terminal server located at another office leads to inaccessibility of the printer.
The network dump can be downloaded in PCAP format from here.

How to pan,tilt or zoom through web interface

hi there!
everything work fine for me.. I manage to stream through my websever (I have tryed several softwares and the only which works fine is the willingsoftware one)..
the only problem I have is that the only way to pan ot tilt the webcamo is through the delivered software ("Pan and Tilt control"), but I would like the web users to be able to do it trough the web too!!!)
does anybody know a software which handles that trough web interface?
thanks!

I would like to be able to do this too. I want people to be able to control my camera remotley. How can I do this?

Unable to install any Gnome Extensions through Web Interface

I am trying to install Gnome Extensions through the Web Interface. I have done this before a few months ago but for some reason it stopped working. I switch the extension to on, and I confirm I want to install it. Nothing happens after.
I can enable and disable Gnome Extensions through the web interface, and the firefox extension "Gnome Shell Integration" is enabled. I have found plenty of topics on the subject but none seemed to actually provide a working solution.

Binero wrote:
I am trying to install Gnome Extensions through the Web Interface. I have done this before a few months ago but for some reason it stopped working. I switch the extension to on, and I confirm I want to install it. Nothing happens after.
I can enable and disable Gnome Extensions through the web interface, and the firefox extension "Gnome Shell Integration" is enabled. I have found plenty of topics on the subject but none seemed to actually provide a working solution.
Which extension are you trying to install?
I have this problem recently with google chrome and the dash-to-dock extension every time either GNOME Shell updates, or the extension updates. I find if I turn the extension off, delete it, restart GNOME Shell, and then reinstall the extension then it works.

[ACS]Problem web interface after reboot

Hello,
After power outage, when my ACS reboots the web interface doesn't start.
When I connect to CLI with SSH, I enter the command :
sh acs-config-web-interface
This is the result :
ACS management must be running
Please issue 'acs start' CLI if stopped,
or wait for the ACS processes to come up
So I enter the command :
acs start
And it's OK.
What is the reason why the ACS doesn't start properly?
Thank you in advance for your response.
Regards.
Thomas.

Hi Thomas,
Which version of ACS you are running?
Regards
Najaf

Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

BPC Web Interface

Hi,
I'm got an strong assumption and just want to validate with experts before putting this as an option to the client.
We want to access BPC input schedules and reports (developed using EVDRE function) through web interface. Users should be able to input data through web interface instead of logging into BPC for Excel.
To achieve the above requirement, we just need to publish the input schedules and reports to the content library and then we use the generated URL to access the respective input schedule/report through portal ?
Another question is: as BPC is service enabled, can we access the BPC input schedules and reports without SAP portal too?
Thanks,
Shabbar

Hi Robert,
1. When you refer to LiveWeb you are refering to the web based report of BPC?
Under the Portal Publication button in Excel EPM in version 10 there is a prompt for BI Launch pad or BPC Documents View. Documents view results in an error.
Where you successful in converting from Excel to Web in version 10?
Thanks
Eyal Feiler

ACE unable to access through web browser.

Hi Team,
We have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. Kindly suggest what will be the Issue? Please find the below dummy configuration.
resource-class SLB_STICKY
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 10.00 maximum equal-to-min
access-list ANY_Traffic_Permit line 8 extended permit ip any any
access-list ANY_Traffic_Permit line 16 extended permit icmp any any
class-map type management match-any CM_Remote_MGMT
description *** Class-Map defined the permitted Protocol list for Remote Management ***
201 match protocol icmp any
202 match protocol telnet any
203 match protocol http any
204 match protocol https any
205 match protocol snmp any
policy-map type management first-match PM_Remote_MGMT
description *** Policy-Map defined the permitted Protocol list for Remote Management ***
class CM_Remote_MGMT
permit
interface vlan 60
ip address 10.160.7.3 255.255.255.0
alias 10.160.7.2 255.255.255.0
peer ip address 10.160.7.4 255.255.255.0
no normalization
no icmp-guard
access-group input ANY_Traffic_Permit
access-group output ANY_Traffic_Permit
service-policy input PM_Remote_MGMT
no shutdown
Thanks in advance..
Regards,
Ranjith

Hi Ranjith,
I dont see any problem with the config as per the doc.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/quick/guide/setup.html#wp1010367
What browser are you using? Did you atleast get a message to accept the SSL certificate as trusted when you access https://10.160.7.3
Regards,
Siva

IDS 4125 , web interface access, CLI access, monitoring

I knew that we can use ciscowork 2000 to monitor IDS.
1- But can I use Cisco security agent to monitor IDS as well ?
2- Are there any other software for monitoring IDS beside ciscowork 2000 ?
3- Does IDS 4125 itself have web interface for monitoring ?
4- We have got IDS 4125 at work (production line), I tried to access it through web interfaces, I tried all of these without any success:
https(with s)://192.168.x.x,and https(with s)://192.168.x.x:443, http(without s)://192.168.x.x, I could not, then I tried to access it through console without any success.
I can telent to it.
Regards
Regards

1) No. CSA is a host based IDS. Do you mean Cisco Security Manager? I'm not positive, but I don't think the CSM supports event monitoring like the old CiscoWorks/VMS did.
http://www.cisco.com/en/US/customer/products/ps6498/products_data_sheet0900aecd803ffd5c.html
2)Here are the Cisco tools:
IDS Event Viewer (free): http://www.cisco.com/cgi-bin/tablebuild.pl/ips-ev
CSMARS: http://www.cisco.com/en/US/products/ps6241/index.html
CiscoWorks SIM(netforensics): http://www.cisco.com/en/US/products/sw/cscowork/ps5209/index.html
Otherwise, just do a google search for "Security Event Management" or similar. The Cisco IDS/IPS has enough market share that most vendors support them.
3) I'm not familiar with that model. Do you mean 4215? The 5.x version has an event monitoring web interface. I don't remember if the 4.x code does.
4) By default, the 5.x sensor will be listening on tcp port 443 for https connections and tcp port 22 for ssh connections. telnet is disabled by default. These can all be modified though.

Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
    Targets:
        interconnect
        ipv6
        test
    Properties:
        commitpending = (Cannot show property)
        dhcp_clientid = none
        dhcp_server_ip = xxxxxxxxx
        ipaddress = xxxxxxxxx
        ipdiscovery = dhcp
        ipgateway = xxxxxxxxx
        ipnetmask = xxxxxxxxx
        macaddress = 00:10:E0:65:2F:20
        managementport = MGMT   <<<<<<<<<<<<<<
        outofbandmacaddress = 00:10:E0:65:2F:20
        pendingipaddress = xxxxxxxxx
        pendingipdiscovery = dhcp
        pendingipgateway = xxxxxxxxx
        pendingipnetmask = xxxxxxxxx
        pendingmanagementport = MGMT    <<<<<<<<<<<<
        pendingvlan_id = (none)
        sidebandmacaddress = 00:10:E0:65:2F:21
        state = enabled
        vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

Getting SQL*Net more data from client waits when running a query through web based interface

Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.

Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data.

Web Interfaces Running Through Portal - Tab Spacing

When a web interface is created in BPS_WB and run through BPS_WIF0, tabs and spacing are correct. When the web interface runs through the portal, the spacing on the tabs is off. Tab 1 is perfect, Tab 2 has one blank line /space before the functions / layouts, Tab 3 has 3 blank lines. How do I resolve this? Is it a template issue on the portal versus BPS_WIF0? I have tried playing with the spacing to no avail.
Thanks

Hi Cherie,
do you have an answer on that in the meantime?
I am new to the WAD and experience the same problem.
Thanks,
Frank

SLM248p web interface down and time reset

My SLM248P web interface keeps locking up (i.e. I get noting when I go to the IP address of the switch). I need to power cycle the switch to get the web interface to work. Also, whenever I reset the power, it goes back to Jan 1, 2000 (time). The swithc alsow seems to loose connections every now and then. And I keep getting a waring in the log that looks something like
"%STP-W-PORTSTATUS: e26: STP status Forwarding"

I have the newest firmware. It has no impact on the situation.

Laserjet Pro 200 color m251n web interface password reset

In past days I changed ip range in my net and when I needed to set the new ip in my printer I discovered I forgot the web interface password.
My printer have not touch display and for security reason I disable uso of menù from display. now I need to reset it. For my is good reset the printer as factory config. could you help me?best regards

Hey , Welcome to the HP Support Forum. I see that you're locked out of your HP LaserJet Pro 200 color Printer M251n's Embedded Web Server (EWS). I would like to help. There is only one way to remedy this issue. I will private message you the steps to complete a reset that will ideally clear out the password. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. Let me know if this works out for you. I f I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thanks for reaching out. Have a great day!

WRT160NL - reset/reboot through web interface

Similar Messages

Maybe you are looking for