Wrt160nl upnp and xbox360-- some files missing

Hi,
I have a wrt160nl with original firmware. (tried updating but it said it failed each time)
I have upnp turned on to share files with my xbox360. My xbox can connect to the server, but it doesn't see all of the files. I have a folder, HD Movies which has 12 HD movies, 8 of which or mkv, and then a few others. The xbox only sees 5 mkvs, and 1 .mov... I'm curious why 3 of the mkvs don't show up at all. (i realize the xbox won't plat the mkv file, i'm just curious why some of them show up and others dont) I have auto scan turned on and i've waited a few days. I've also restarted the router and the xbox. There are about 20 movies the xbox doesn't pick up out of around 140. Most of them are normal avi files that play fine through a usb stick.
Would a firmware upgrade help this? Any suggestions on why i can't upgrade my firmware?
Also, if i scan manually, it seems to stall. I've let it sit overnight and it still has the --scanning drive-- message. If i quit early, most of the files won't show up at all. If i let it auto scan, most of the files will be there eventually.

Thanks saber_tooth ... but the xbox's firmware can't be upgraded legally. And the OS level software on it is up to date. In addition, it can access the exact same files from my computer which is acting as a upnp server. It only has problems with the wrt160.
Also, my computer can access the files using samba... isn't that separate from upnp?
Why does the router not ever finish scanning when i scan it manually? Why can't i upgrade my firmware on the router ( i get an error that says the upgrade failed)??
Thanks again

Similar Messages

Where does the logging in RDBMSRealm go --and-- are some JavaDocs missing?

I see that a LogOutputStream is created in the example
class RDBMSRealm, but where do all of the log
statements go. The LogOutputStream is created as:
log = new LogOutputStream("RDBMSRealm");
but I do not see and file called RDBMSRealm and/or
I do not see the log statements on stdout.
BTW, I do have logging set to the most detailed
level (Info) from the console if this matters.
Also, are there some JavaDocs missing from
Weblogic's Reference website at
http://edocs.bea.com/wls/docs60/javadocs/index.html
LogOutputStream is an example. I do not see the
class when I select the package
weblogic.logging.
Where is it?
Much Thanks
Bill Ralenkotter.

Thanks Terry,
Sorry, I should have mentioned that I am using WL6.0.
Does anyone know what I need to do to get the RDBMS Realm log to start on
WL6.0.
About the missing JavaDocs: Also, if I am doing development using these
classes I still do not
understand why they are not on the 6.0 refernce site!
About the missing JavaDocs,
I see java docs for a lot of classes, but what document do I use that
helps me to understand the entire framework? The Programming
Weblogic Security does give this information.
Example question: how do I get a reference to the realm to create
users? Should I even be doing this?
Thanks for your help.
Bill.
"THorner" <[email protected]> wrote in message
news:B4D7B3CBF165D311844100C04F4E3E1B031246@DANCERACE01...
If you are using WLS5.1 you much set the property
weblogic.security.realm.debug=true
then this information will be sent to stdout. This is set to false by
default, as there is a lot of information, and it is a big performance
hit.
I think weblogic likes to avoid some of its APIs being public, which is
annoying at times, but probably reasonable
terry
-----Original Message-----
From: Bill Ralenkotter [mailto:[email protected]]
Posted At: Thu 03 May 2001 16:00
Posted To: weblogic.developer.interest.security
Conversation: Where does the logging in RDBMSRealm go and are some
JavaDocs missing?
Subject: Where does the logging in RDBMSRealm go and are some
JavaDocs missing?
I see that a LogOutputStream is created in the example
class RDBMSRealm, but where do all of the log
statements go. The LogOutputStream is created as:
log = new LogOutputStream("RDBMSRealm");
but I do not see and file called RDBMSRealm and/or
I do not see the log statements on stdout.
BTW, I do have logging set to the most detailed
level (Info) from the console if this matters.
Also, are there some JavaDocs missing from
Weblogic's Reference website at
http://edocs.bea.com/wls/docs60/javadocs/index.html
LogOutputStream is an example. I do not see the
class when I select the package
weblogic.logging.
Where is it?
Much Thanks
Bill Ralenkotter.

I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

Look in /Users folder. You can go to System Preferences > Users & Groups, open the lock and "-" delete the account it created.
This is a problem whenever you use migration assistant after the initial install. The proper way to run Migration Assistant is in Setup Assistant when you first boot your Mac. I don't know why Apple isn't clearer about this issue.

File process - some files missing in processing

Hi,
I am using the below code to create drives on network.
This exe file is used by ILM as part batch job. The job will pick input files from local drive.
Query: While executing this job some input files are missing so for them drive is not created. Please let me know what could be the reason and how to resolve? let me know how to avoid file missing without processing?
System.Diagnostics.Process cmd = new Process();
cmd.StartInfo.UserName = "ad_user";
cmd.StartInfo.Domain = "domain";
cmd.StartInfo.Password = "password";
cmd.StartInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
cmd.StartInfo.FileName = @"d:\miis\createdrive.cmd";
cmd.StartInfo.WorkingDirectory = @"d:\miis\";
cmd.StartInfo.UseShellExecute = false;
string these_args = string.Format("{0} {1} {2}", domain, ocgsamaccountname, ocgpathtocreate);
cmd.StartInfo.Arguments = these_args;
try
Console.WriteLine(cmd.Start());
if (!cmd.WaitForExit(15000))
skip_delete = true;
jaya

Found the issue:
At first glance my itunes music folder looks normal, but after some careful reading of the location data...it turns out all of my music is also stored in a subfolder "MUSIC" in with all the artist names. I found this after discussing with a genius today while having my battery replaced. Together we found the issue.
How? iTunes at some point started making a MUSIC and MOVIES and maybe some other folders in the iTunes folder. When I redid my library some time ago, it must have changed the directory and copied all my music to the user/music/iTunes/iTunes Music/Music folder. This would also explain why I found that sometimes my library took up more data than I had expected. iTunes would say 45 GB but the folder would say 90GB.

Some files missing sound some not; all play on another computer

Both my wife and I have MacBookPros running 10.4.8. I put some video files from a VCD onto both our hard drives. They started out with a .DAT suffix, but I read that they could be manually changed to .MPG format by re-labelling and that they would play in QuickTime.
On my wife's Mac, it works flawlessly. On my Mac, it only plays the video but no sound. Other video files have sound on my Mac in Quicktime, and these VCD files play with sound in VLC on my Mac; so there must be something about my Quicktime (and not hers) that is causing this behavior. I replaced every QuickTime related plist, plugin and preference file I could find on my Mac with those from her Mac, all to no avail. Created a new user on my Mac and still no sound, only video. Any suggestions appreciated.
Second question. Canon XLIM's AVI movies show white screen but do have sound on both our computers. I've tried Perian but it crashes my Quicktime after briefly showing video. I must be missing a codec. If anyone with this camera has solved the issue, please let me know. the AVI movies play in VLC just fine.
Thanks for reading!
MacBookPro Mac OS X (10.4.8)

Thanks for getting back. I have the movies downloaded to my computer. I went to 'Get Info' and now I do see that they are Copy Protected. I was able to copy them to a DVD as I said. And to make sure I wasn't watching the original when I put the DVDs back in my computer for testing, I closed iTunes and used Qucktime to view them...and it worked. When I was burning them I got no warning that they were copy protected and went through the near hour it took to copy each one and it said I would be able to play it on 'any Apple or Windows computer..but not on a DVD player' and that was why I lent them to a friend to watch. But I guess if they are copy protected that was surely in vain. I wish I had gotten prompts telling me that, instead of wasting 5 DVDs and several hours..not to mention getting them to my friend and getting her all excited to see the films. Oh well...she will have to come over here to watch them. Thanks.

Merging files and alert if file missing?

Hi experts.
I have a situation when I will pickup 5 files from different systems.
The files will be merged into one file and have no problems with that I can use append in the file adapter.
But here coems the problem. The merged file will be sent to the SAP sysmet at a specific timesrtamp and if a file i missing then we should send an alert or mail to notify the organisation that the file is missing.
The notification has to be sent to the correct person according to what file is missing.
We are using PI 7.40 Java only.
Is the only way to go the new BPM?
Is there anybody who has a guide on how to setup the new BPM?
Regards
Andreas

Hi Raj,
Raj Says..
my doubt is Java map take input of all files as input or only one file it takes input.??
Java Mapping will take one input file at a time as its input file and will process it.
For three files at source folder; Java Mapping will be called threee times in XI.
regards,
Madan Agrawal

Why are some files missing from import screen?

I'm trying to import some files into LR, but the import screen isn't showing all of the files that are in the folder I've selected.
I've notice this only when there are multiple files with the same base filename. For example, when the folder contains the following files, LR will show all of them in the import screen:
file.mp4
file1.jpg
file2.jpg
However, "file1.jpg" will not be shown in the import screen when the folder contains the following files:
file1.mp4
file1.jpg
file2.jpg
I've been unable to find an LR preference that covers this. Have I overlooked it?
Thanks!

Here's a guess ... emphasis on the word "guess" ... when you have file1.mp4 and file1.jpg, the .jpg is considered a "sidecar" and won't be imported ... unless ... you select the option in Preference (general tab) that says "Treat JPG files next to raw files as separate photos" ... yes, I know the option says "raw" and your file is an "mp4", but it takes you less than a minute to give ita try

Some files missing, some not.

Okay, there are similar posts but mine seems to be different then the others. I recently moved some files, but not my iTunes folder that I use and now iTunes won't find the majority of my files.
Here's what I did. I have a Buffalo Link Station Pro that I use to host my music and TV shows(on a drive that's attached to it via USB). I recently bought a third external drive to replace the other USB drive that's attached. In doing so I unplugged the music drive so I could move files (since the LS uses XFS, I had to attach them and do it that way) over from the other drive. This worked fine so I removed the old, smaller drive and hooked up my music/iTunes drive again, into the same USB plug with the same name and the same locations (my iTunes was off during this whole process so it wouldn't look for the files during this).
When the drive was back up and mounted, I restarted iTunes. Exclamation points. No problem, right? I went to preferences (it returned to default) and redirected to the appropriate folder. Now it finds about 1 out of every 15 songs. Really strange. I've got tons of songs and tons of smart playlists sorted by ranking and I desperately do not want to re-rank them.
Message was edited by: Mark Leszczynski1

Yes, it's weird that unplugging a drive with iTunes not running, then re-connecting, should cause a problem. However, those ! are not coming from the music files but from the iTunes Library database file which holds all the paths to each and every song. Pointing your Preferences to the Music Folder will only do part of the job - if something happened to that Library file, that's a separate issue.
I'm puzzled why your Preferences reverted to default. That shouldn't have happened.
Do you have a backup of your iTunes Library file somewhere? If so, copying that back to the iTunes folder may resolve this.

New Lightroom catalog always selects and includes some files from folder Applications/Mail/Contents/Resources. Why? Mac Mini OS X 10.10.1. Lightroom 5.7

Whenever I create a new catalog, Lightroom selects and includes some, but not all, TIFF files from the folder Applications/Mail/Contents/Resources. Why does it do this: I don't select this folder to be included. Mac mini OS X 10.10.1. Lightroom 5.7.
Help much appreciated.
Regards
Dan O'Neill

Whenever I create a new catalog, Lightroom selects and includes some, but not all, TIFF files from the folder Applications/Mail/Contents/Resources. Why does it do this: I don't select this folder to be included. Mac mini OS X 10.10.1. Lightroom 5.7.
Help much appreciated.
Regards
Dan O'Neill

Lost my Outlook for Mac 2011 and all emails, calendar, etc. after moving and trashing some files

I followed some suggestions for improving speed and ran the EtreCheck and removed some items. I didn't touch anything Microsoft or Outlook related. My mac got hung-up last night when I was trying to put it to sleep so I had to force quit some programs, one of which was Outlook, and then I shut down the mac rather than sleep mode. This morning I no longer had any of my emails, or my calendar, or excel files, etc. I couldn't get any new emails because it said the server did not recognize or acknowledge my user accounts or passwords. I went to the ISP's website and all my accounts/passwords were correct and active as I was still getting them through my iphone and ipad. Can anyone help me? I can provide the latest EtreCheck and system log showing the warnings, failures, errors, etc. if that helps!

Hi,
Thanks for Diane's suggestion. If it still doesn't work, I suggest you post the question in Office for Mac forum to get more specific support:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

On my new Imac, I had the trial version of Pages, and saved some files in it. Now I have purchased the full version from Apple via a download, but I cannot save or print the old files, please help!

On my new Imac I saved some files on the free trial version of Pages, since downloading the full version from Apple, have been unable to save or print from old files saved when using the trial version. Any ideas? Thank you!

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Run DB Verify and has some files corrupt. Need help

In our system, after we run the DB Verify and two data files have the following message:
Page 254582 is marked media corrupt
Page 254583 is marked software corrupt
Page 254584 is marked software corrupt
Page 254585 is marked software corrupt
Page 254586 is marked software corrupt
Page 254587 is marked software corrupt
A few questions:
What is the difference between the 'media corrupt'and 'software corrupt'?
How to verify if the data is really corrupted or not?
If is corrupted, is possible to repair it?
How to recover from this?
In general, what are the procedures after finding files are currupted?
Thanks for advises.

While I think that Mylenium and Dec9 have solved your problem with installation, here is a CHECKLIST on installing most Adobe programs, that might also help.
Good luck,
Hunt

I uninstalled 3.6.13 tried to install 4 9 beta... it only created folders and made some files...missing many files. Tried to reinstall 3.0, 3.6, 4 4, 4 9... same result no complete install...

my copy of 3.6.13 was getting overcrowded with add ons and plugins and heavy bookmarks and I wanted a clean slate so I uninstalled 3.6 completely... I then tried to download the 4 beta...installer ran quit without errors and then left me with empty start menu folder and half empty program files folder...missing lots of necessary files including firefox exe...I tried downloading an older version 3.0 of firefox...then 3.6.13 again... then a 4 4 beta release then the mozilla site 4 9 beta again... every one did the same thing... what would cause this?

Matt,
I am glad (well not glad, it sucks but I'm glad I'm not alone) to hear you are experiencing the same thing. I have literally tried everything to get this to work. I even took a brand new laptop out of the box and Adobe was the only thing I installed. I can usually follow other posts and fix issues but I am stumped and WAY aggrivated. I love the concept as does my editing team but I'm in charge of installing and updating 5 PC's and my team is now aggrivated that they can't get what they need to do their jobs. Even if you download the trials, you don't get everything you need for the whole cloud process. Not to mention we all need updates badly and really need to start using Edge Animate.

WRT160NL upnp and subtitles.

Dear all,
I have upnp configured nicely working to my kiss 1600 mediaplayer. When I play a movie with srt-subtitles, the subtitles will not show. When I play the same movie from USB stick directly in the kiss 1600 the subs are shown nicely.
I have read on other sites that there are issues with upnp servers not scanning srt-files and such. Is the upnp server of the WRT160NL one of them? Can I configure anything to do so? I have upgraded the firmware to 1.00.01 B1.
Please advise.
kind regards,
Ronald

As you upgraded the router's firmware,I would suggest you to reset the router for 35 seconds,Power Cycle the router and reconfigure it from scratch.

Some files missing

hey all, i have a 30gb ipod w/ movies and pics.. some somgs are in my itunes libary and can be played when clicking them, but they do not update into my ipod? why is this

Yes, it's weird that unplugging a drive with iTunes not running, then re-connecting, should cause a problem. However, those ! are not coming from the music files but from the iTunes Library database file which holds all the paths to each and every song. Pointing your Preferences to the Music Folder will only do part of the job - if something happened to that Library file, that's a separate issue.
I'm puzzled why your Preferences reverted to default. That shouldn't have happened.
Do you have a backup of your iTunes Library file somewhere? If so, copying that back to the iTunes folder may resolve this.

Wrt160nl upnp and xbox360-- some files missing

Similar Messages

Maybe you are looking for