WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

  • HP G60-630US Notebook - Webcam is unknown device + USB device not recognized pop ups [update]

    My webcam and everything was working fine last night. I even used my webcam on the new yahoo I had installed a few days before. When I got up this morning and turned on my laptop, I kept getting pop ups every 3 minutes stating USB device not recognized despite not having anything plugged. I check out device manager and see an unknown device and Imaging Devices missing. When I try to go into youcam, it tells me that the cam isn't detected. 
    My laptop is  HP G60-630US Notebook PC, Windows 7 Home Premium 64 Bit.
    There were no changes made last night. Although after all this I tried removing all of the usb and rebooting, but nothing worked. I am still getting the frequent pop ups. PLEASE any help would be appreciated.
    Update: I just ran the Bios update and instead of unknown device, it says USB composite device
    This question was solved.
    View Solution.

    Try this
    Use device manager to manually install the webcam driver, Open Device Manager, right click on the unknown image device and select "Update Driver" then "Browse my computer for driver software", then "let me pick from a list of device drivers on my computer" then click the "Have Disk" button, then click the "browse" button, browse to "C:\Windows\inf" folder and find "usbvideo.inf" and select it , then hit OK, drivers should load.

  • USB Hubs Not Recognized After Restore

    Hello Lenovo Forums!
    I have a t61p 6450CTO lovely work laptop that I adore ... upgrading now to 500gb and 4 g of ram ... but I recently restored to original second tier (saved my files) and ... to get Lenovo ThinkVantage working again and System Update. It works great!
    Now I cannot upgrade to SP1 on Vista home premium. Also USB HUBS not recognized, (can't print) even after going into bios and updating USB to enable and enable all the time --- AND cannot install Windows Updates except SOME one at a time. So I recently ordered Windows Vista upgrade might help and have a fresh operating system yes?
    Any help is appreciated! About to do another restore ... thank goodness for that still working! Steve in Ohio

    someone? please

  • USB device not recognized after connecting the iphone to PC

    Hi all,i have an iphone 3Gs 16 GB.I have some problems with it.Yesterday when I decidet to plug my iphone to PC and update the iOS,windows gives a message:USB device not recognized. ***?! I tried to change the USB cable and no fix,i tried reinstalling iTunes-same thing,I tried on another computer-the same.So in my country there's no apple store just Orange store what sels this mobiles and i took it there, so i'm waiting for the response.What could be with it?! There was no water or physical damage. ?! Thanks a lot

    someone? please

  • Built-In iSight NOT RECOGNIZED after EFI Update 1.1

    After updating to EFI 1.1 on my iMac 20 Inch (2,16Ghz) the built-in iSight-Cam is not
    working anymore. It´s not showing up in the system profiler > USB Devices.
    I bought the iMac last week, switched it on, the cam took a picture on the user account creation,
    I applied the EFI-Update and OSX 10.4.8. After that the cam was gone.
    I tried everything from resetting SMC, PRAM to reinstalling Combo-Update 10.4.8 ... NOTHING helped !
    Any ideas or solutions ???
    P.S.: Sorry for my crappy English, I´m writing from Germany !

    Here´s a report from MacFixIt.com about this problem:
    http://www.macfixit.com/article.php?story=20061211231332862
    Built-in iSight not recognized Some users have reported loss of their built-in iSights after applying the iMac EFI Firmware Update 1.1. In some cases, this issue can be resolved by resetting the SMC (system management controller) using this process:
    1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    2. Unplug all cables from the computer, including the power cord and any display cables.
    3. Wait at least 15 seconds.
    4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
    5. Press the power button on the back to start up your computer.
    Resetting PRAM can solve a variety of issues As mentioned in our coverage of recent EFI Firmware updates issued for other Macs, a number of potentially serious issues apparent after applying this EFI Firmware Update can be resolved by simply resetting PRAM/NVRAM via the following process:
    Shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    This workaround is a good first course of action before exploring more complex fixes. It should also be attempted if your system cannot properly startup after applying the update.

  • M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

    After updating the firmware to 48.301.7, I have two M5035MFP machines that are displaying "68 Permanent Storage Write Failed" error messages. The users can press Continue and printing will proceed normally for another 10-50 pages when the message will appear again. The NVRAM and HDD have been reset/intiliased and they have been powered off/on several times.
    This is also occurring on two other different models (6040MFP/9040MFP) which also started showing up after a firmware update about the same time.
    Could this be a failed update? How would I go about downgrading to a previous firmware version?

    Hi Rwelper,
    I want to share with you this solution: 
    Please try first to reseat the Formatter/HDD and the memory DIMM and install the correcly then try:
    First it is not adviced to downgrade the firmware at this step, you can try a cold reset and upgrade firmware again.
    here, you need to remove the existent Firmware file on your PC and try to download it again from the HP Website, thus you can instaltly disable the firewalls and the antivirus and do this action.
    NOTE: You can try a new upgrade firmware before you proceed with the Cold reset* of the printer.
    Cold reset (Format disk also can be performed if this don't work): You can check the printer's manual to know how to perform it.
    Please try an NVRAM init or Super NVRAM Init if this don't give a solution.
    All these manipulations you can find in the printer's manual
    Please note also that all these manipulations will delete all the current printer's configuration if it going to be working fine, so you will need to upgrade firmware and set your printer up again.
    ==> There is a need to delete files on the HDD / data on the DIMM, unplug and restart the printer.
    The final solution is to replace the Formatter then the HDD if all these solutions don't bring a result.
    Soudani
    I work for HP
    I hope this solution respond to what you need
    You can post a like if you like this answer

  • DVD drive not recognized after Security update

    Hello -
    Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
    I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
    Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
    BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

    Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
    Darth

  • Usb port not working after yosemite update please help

    ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my  computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
    Anonymous UUID: 
    CCC4DCA9-48E9-4692-250B-488588FCC69E
    Sun Nov  9 17:58:17 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8031663b80 : 0xffffff8029f3a811
    0xffffff8031663c00 : 0xffffff802a005eb2
    0xffffff8031663cf0 : 0xffffff802a0065e5
    0xffffff8031663d50 : 0xffffff8029fb6b4a
    0xffffff8031663e60 : 0xffffff8029facd2c
    0xffffff8031663e90 : 0xffffff8029f5c747
    0xffffff8031663ed0 : 0xffffff802a3c45ff
    0xffffff8031663f40 : 0xffffff802a3c425c
    0xffffff8031663f50 : 0xffffff802a44dcb2
    0xffffff8031663fb0 : 0xffffff802a03ac46
    BSD process name corresponding to current thread: suhelperd
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:
    0x0000000029c00000
    Kernel text base: 0xffffff8029e00000
    __HIB  text base: 0xffffff8029d00000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 7052072843826
    last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
    last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
    loaded kexts:
    com.huawei.driver.cdc_ncm    2.7.2f16
    com.huawei.driver.dc_net    1.0.2
    com.huawei.driver.cdc_acm    2.6.2f17
    com.huawei.driver.cdc_usb_bus    1.0.3
    com.huawei.driver.HuaweiDataCardDriver    4.25.45
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.70
    com.apple.driver.AGPM    100.14.37
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
    com.apple.driver.AppleOSXWatchdog    1
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleHDA    266.5
    com.apple.driver.AppleMikeyDriver    266.5
    com.apple.driver.AppleSMCLMU    2.0.4d1
    com.apple.driver.ApplePolicyControl    3.7.21
    com.apple.driver.AppleLPC    1.7.3
    com.apple.driver.AppleUpstreamUserClient    3.6.1
    com.apple.iokit.IOUserEthernet    1.0.1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleHV    1
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleIntelHD3000Graphics    10.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
    com.apple.driver.AppleBacklight    170.4.12
    com.apple.driver.AppleMCCSControl    1.2.10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.driver.AppleSMCPDRC    1.0.0
    com.apple.driver.AppleThunderboltIP    2.0.2
    com.apple.driver.SMCMotionSensor    3.0.4d1
    com.apple.driver.AppleUSBTCButtons    240.2
    com.apple.driver.AppleUSBTCKeyboard    240.2
    com.apple.driver.AppleIRController    327.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.iokit.SCSITaskUserClient    3.7.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.5
    com.apple.driver.AppleUSBHub    705.4.1
    com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
    com.apple.driver.AppleFWOHCI    5.5.2
    com.apple.driver.AppleSDXC    1.6.5
    com.apple.driver.AirPort.Brcm4331    800.20.24
    com.apple.driver.AppleAHCIPort    3.0.7
    com.apple.driver.AppleUSBEHCI    705.4.14
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleACPIButtons    3.1
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    3.1
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
    com.apple.nke.applicationfirewall    161
    com.apple.security.quarantine    3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
    com.apple.iokit.IOUSBMassStorageClass    3.7.0
    com.apple.AppleGraphicsDeviceControl    3.7.21
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    11
    com.apple.driver.DspFuncLib    266.5
    com.apple.kext.OSvKernDSPLib    1.15
    com.apple.iokit.IOAudioFamily    200.6
    com.apple.vecLib.kext    1.2.0
    com.apple.driver.AppleHDAController    266.5
    com.apple.iokit.IOHDAFamily    266.5
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOSurface    97
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.AppleGraphicsControl    3.7.21
    com.apple.driver.AppleBacklightExpert    1.1.0
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.driver.AppleSMBusController    1.0.13d1
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.iokit.IOBluetoothFamily    4.3.0f10
    com.apple.driver.IOPlatformPluginFamily    5.8.0d49
    com.apple.iokit.IOUSBUserClient    705.4.0
    com.apple.driver.AppleSMC    3.1.9
    com.apple.driver.AppleUSBMultitouch    245.2
    com.apple.iokit.IOUSBHIDDriver    705.4.0
    com.apple.driver.AppleUSBMergeNub    705.4.0
    com.apple.driver.AppleUSBComposite    705.4.9
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily    4.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.3b3
    com.apple.iokit.IOFireWireFamily    4.5.6
    com.apple.iokit.IO80211Family    700.52
    com.apple.driver.mDNSOffloadUserClient    1.0.1b8
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.7.0
    com.apple.iokit.IOUSBFamily    705.4.14
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    300.0
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.AppleMobileFileIntegrity    1.0.5
    com.apple.driver.AppleCredentialManager    1.0
    com.apple.driver.DiskImages    389.1
    com.apple.iokit.IOStorageFamily    2.0
    com.apple.iokit.IOReportFamily    31
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    3.1
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.Libm    1
    com.apple.kec.pthread    1
    Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
    Serial ATA Device: ST9320325ASG, 320.07 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: Hub
    USB Device: HUAWEI Mobile
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, 20080d.0

    I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them.  The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
    I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
    Any Help out there?
    Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
    BANK 0/DIMM0
    8 GB DDR3 1600 MHz ok
    BANK 1/DIMM0
    8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless:  en0: 802.11 a/b/g/n/ac
    System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 1:43:41
    USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad

  • X7 headset is not recognized after Belle update

    Hi,
    afters Belle update my original headset is not recognized by Nokia X7, can't listen to music or radio. The icon is not visible.
    Headset is 100% ok, I tried it on different phone and works fine.
    After hard reset is starts working but after unplugged and plugged one again it is still not working. Another hard reset didn't help.
    Also tried accessories settings in settings menu - changing profiles and other setting - didn't help.
    Any ideas?
    Regards

    Same problem here too.
    Updated to Belle and tried to listen to my music using the original nokia x7 headsets and the music plays only from the speakers too. Tried the headsets on my brother's nokia x7 updated to belle too and they worked fine. Others headsets also didnt work in my nokia x7 but they did in my brother's. I tried to reinstall Belle, restore orinigal settings several times and it didn't work.
    Think i just gonna have to sent my phone to the SAT

  • 2nd cd/dvd drive not recognized after security update 2014-002

    I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer.  It does not even show up under "About This Mac" or as a drive in disk utility.  Worked fine up until this update.  Any ideas?
    Thanks

    I think I have solved my own problem.  After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine.  I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

  • N95 backup file not recognized after Firmware upda...

    Hi,
    I've been updating my N95 from V11 to V12.0.013 right after I did a backup file. Backup went ok and no error reported.
    After fw update, I tried restoring data but Content Copier informs that "no earlier backup file exists for this phone".
    I've tried selecting folder where back-up file is saved but it does not recognize it.
    I was using PC Suite 6.83 and decided to upgrade to 6.84 just released, to have another try but it still doesn't find backup file, eventhough it exists (2007-07-12 Nokia N95.nbu)
    Could you please instruct if there are some specific steps to go through in such case??
    I'm using XP, Service Pack 2
    PC Suite 6.84
    N95, V12.0.013
    Many thanks!
    Flo
    P.S.: If needed I could send mentionned backup file but it is huge (42MB)

    please try noki to make sure the backup file is ok: this thread
    What's the law of the jungle?

  • Seagate external drive not recognized since firmware update

    I've looked through the posts here and haven't found this issue addressed specifically, so here goes. Any help will be appreciated.
    I ran the firmware update on my MacBook Pro the other day, and everything has been normal since, except when I went to switch on my Seagate external HD - which I use as a backup drive - this morning. The mac doesn't see it at all.
    Brought the drive into the office this morning and the iMac here, which hasn't been updated in at least 6 months, sees the Seagate right away.
    I haven't upgraded to Leopard, though I have it, becuase I'm in the middle of a project and don't want any trouble with ProTools. In fact, I hadn't been making any updates at all, but in a moment of weakness ran the firmware update!
    Thanks in advance.

    Thanks kaz-k,
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            DiskWarriorDVD         *1.4 GB     disk1
    192-168-1-2:~ Jessie$

  • Cisco WS-2960S-48TS-L does not work after firmware update

    Hello.
    After purchasing the Cisco WS-2960S-48TS-L decided to do a firmware upgrade using the CISCO NETWORK ASSISTANT. Unfortunately update failed. Currently the switch when you run can not load the system image.
    Since up to now I had to deal with the other switches do not really know how to upload the correct image now. The more that you connect the switch through the console acts as to a limited extent.
    Please help

    Thank you Leo Laohoo.
    Your suggestion to usbflash0 helpful.
    It is true that I was struggling because of usbflash latest iso system also did not want to go, but I recorded version of one lower and went.
    By the way, I learned that the USB must be formatted to FAT file system.
    Again, thank you for your help.
    Darek Rynkowski

  • Phone not working after firmware update for nokia ...

    I tried updating my nokia 5800 today when the new firmware was released. i have already updated my other phone including another 5800. But when I updated the firmware of another 5800 (my 5800 through nokia software updater from pc/laptop), after the nokia updater application said that the update was successful, my phone showed the nokia logo with the new firmware version. It's supposed to reboot automatically and continue as normal but after waiting for like 15 minutes, my phone's still not turning on and still showed on the screen that the phone was not connected. That's when I unplugged it off from the USB cable and tried to turn it on, but it will just vibrate for a few seconds and then nothing! It won't turn on or work! I've tried to search on how to fix this problem but to no avail.. please help me.. is my phone going to work again?
    Solved!
    Go to Solution.

    There's a section in this forum called the "Pool of Knowledge". Have you followed the instructions in this post in the PoK?
    /discussions/board/message?board.id=topfaq&thread.id=112
    Message Edited by grschinon on 02-Nov-2009 06:05 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Security not working after firmware update

    I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. Is there a fix for this? If not, where can I get a copy of the old firmware that worked?

    I'm on a Mac (normally) and have tried Chrome & Safari and then run Win7 via bootcamp and have tried IE.  No change.  None work.  I also tried the reset again (hold down the reset button for 45 seconds) and start from scratch to reconfigure - that didn't work either. 
    Still can only P/W protect 1 of the 2 bands using WPA2 personal.  Each band has a different name and I've tried the same P/W or require different P/W, neither works.
    One update though.  If I set one band to WPA2-AES and the other band to AES, it works.  But not if both are set to the same encryption scheme.

Maybe you are looking for