WRT160Nv2 Cannot be pinged from external network

Hi,
My WRT160Nv2 can not be pinged from an external network. How do I configure the WRT160Nv2 reply to the ICMP requests from the external interface?
Gerwin

Login to your router setup page and click on the Security tab and below uncheck "Filter Anonymous Internet request" and click on Save Settings. Now try to ping from your external network and check if you are getting any response or not.

Similar Messages

  • Monitoring Exchange 2010 from external network

    I would like to monitoring the following services pf Exchange 2010 from external network / internet
    1) SMTP (To confirm the mail has been accepted for delivery)
    2) ActiveSynch (Mobile device can login and synch different folders)
    3) WebApp (Users can log and access mail)
    I have created a script using test-Mailflow, test-activesynchconnectivity and Test-WebServicesConnectivity and running it on server from LAN. I want to monitor the above 3 areas from Internet(external network) to make sure these services are available
    from Internet.
    We have Barracuda as SMTP gateway, TMG for WebApp and MobileIron for ActiveSynch.
    Will i be able to monitor these services from external network(internet) using test commands. What are the alternate ways to monitor the above services from external network.
    Thanks

    We are trying to build exactly similar to ExRCA. ExRCA is good but it is manual. We would like to build something similar to ExRCA which can monitor exchange services periodically and send alerts.

  • Some attachment buttons not working from external networks

    Hi guys,
    We have an eSourcing system that we access internally from server.internal.com . We also make this eSourcing system available to external vendors through www.external.com .
    The external access is done using a Citrix AGEE system (reverse proxy, etc.). As part of this, the AGEE has the ability to change the hostname in the URL so the real server is hidden from external vendors. For example, when eSourcing generates a webpage, the AGEE searches through and replaces all http://server.internal.com references to http://www.external.com , and vice-versa for incoming calls.
    This works for about 95% of the content, but there are a fer places where the links are not re-written correctly. One example is the File Attachment buttons when replying to a question. However, other file attachment buttons work correctly.
    1. Does anyone else have a similar situation, using a Citrix or other product for external vendors?
    2. Does anyone have a similar problem where certain links/buttons are not working from external networks?
    3. Does anyone have any suggestions as to how to fix this problem?
    4. Are there any settings that are specific to external access that may need to be set?
    Thanks guys for any help/insight.
    Michael.

    SAP has re-written some of their code to help rectify the problem. We have also been working with Citrix to provide additional fixes. If anyone else has these problems, apply the latest patch of eSourcing and contact Citrix support to get the AGEE changes needed to make it work.
    Michael

  • Cannot copy file (From external HD, DVD, server) - iTunes 6

    Yesterday I've updated iTune to 6 and de facto Quicktime to 7.0.3.
    Just after this upgrade, I remark that I cannot copy files, using the finder, from external hard disk, dvd drive and network drive. During the drag, I've got the circle indicating that I can't copy.
    I can copy files only from my main hard disk to this one or others.
    (Note: With terminal applications I can copy theses files).
    Anyone else have this problems... or a explanation/solution.
    Thanks

    I reinstall iTune 6 and now everything is ok

  • How to take Auto backup from External Network Drive to Mac pro internal Dri

    Hi,
    I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
    Please could anyone help me on this.....
    Thanks in advance

    If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
    I hope I wasn't help,
    Sincerely,
    Thomas

  • Cannot retrieve photos from external hard drive

    I had to upgrade my OS so that i could download the newest version of adobe photoshop.  this upgrade also upgraded my iPhoto and erasing all photos.  I do have photos backed up on external hard drive but cannot retrieve photos from the external hard drive.

    this upgrade also upgraded my iPhoto and erasing all photos.
    No update to the OS upgrade iPhoto too. So something else is going on there.
    There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Cannot delete files from external HD error code-50

    I keep getting error code-50 when trying to delete a file from my external HD (western digital).  I've restarted everything, it is not a special character problem.  I have been using this HD for about a year and this problem just recently started.  Also I cannot run disk utility verify because the HD does not show up in disk utility.  Not sure if it ever did but I never had problems until now.

    beecazz wrote:
    Also I cannot run disk utility verify because the HD does not show up in disk utility.
    That sounds like cause for concern, but I don't know whether it's connected with the -50 error.
    Do you have backup to restore from if things take a turn for the worse?
    For the deleting problem you could look at the following link. Trash It! seems to solve many Trash problems:
    http://www.thexlab.com/faqs/trash.html

  • Can't see group wiki from external network, but can internal

    when someone goes to my site, and clicks on groups, you see the list of groups. but then you click on it, and it says "group doesn't exist on the server". but it does! it works fine on my internal network. what gives?
    the site is http://tmac.podzone.net
    and no, that's not my internal domain
    Message was edited by: twood3

    Hi,
    This works when I tried it from an external route. Hopefully you want to leave your site open to everyone, because that's the way it is now.
    If you can't get to it internally, then add an A record to your site with external IP address under your current zone.
    HTH,
    Harry

  • ITunes cannot access files from home network

    Just got new Vista PC. All my music files are on older XP PC. I have set up my home network, and Vista PC can see/access all my XP folders. I have Sonos and Yahoo Jukebox installed on Vista PC and both programs can access the XP music files and play them.
    On iTunes however, I cannot create my Music folder with the XP music. When I select 'Add Folder to Library' and get the 'Browse for Folder' popup, I see the 'Network' icon, but when I select it, nothing happens. I can right-click 'Explore' from there to re-launch/see the full network, but iTunes cannot seem to see/access this.
    Same problem if I go through iTunes' Preferences/Advanced/General to set the iTunes folder location. I can hit browse and see 'Network' in list, but selecting it produces nothing.
    Very surprised that I have no problem through Sonos or Yahoo Jukebox but Apple brakes down.
    Any thoughts?

    After the update I cannot connect to my router anymore
    (see other threat)

  • Cannot hear audio from external iSight

    My machine is a 2007 Mac Pro octo, 16GB RAM, OS 10.5.2. Software Update reports the system as up-to-date.
    I just got an external iSight webcam. It's recognized by System Profiler as model 0x8, revision 1.0.3. (For unknown reasons it's reported as having four sub-units and a 200MB/sec connection speed.) iSight Updater reports the unit as up-to-date.
    Its video appears in iChat's (4.0.2) video preview window, and the video's quality is acceptable. The audio meter at the bottom of the preview displays a signal that varies in response to the sound level in the iSight's environment.
    The iSight appears in System Prefs/Sound as a FireWire input. The display there varies with the environment's sound level, and is responsive to changes in the Input Volume setting on the same screen.
    The iSight shows up in Audio MIDI Setup as a fixed one-channel, 16-bit, 48kHz audio source.
    The above tells me the iSight is producing an audio signal. Nothing I've been able to do, however, has permitted me actually to hear this audio signal. Whether I select the Mac Pro's built-in output, its built-in line output, or an external FireWire audio interface, I cannot hear the iSight's audio. Using these same configurations, however, I can hear audio from QuickTime Player or any other audio app I've tried, as well as all system alerts. The problem seems to lie in the signal's routing.
    I've followed this forum's maintenance and troubleshooting guidelines, including isolating the iSight on the FireWire bus and repairing permissions from a second 10.5.2 start-up drive.
    I've spent several hours searching for clues about what might be happening, but have exhausted the suggestions I could find.
    Does anyone have any further thoughts on how I might go about capturing this camera's audio signal?
    I'd appreciate any assistance that gets me there.
    Thanks.

    Hello Hominahomina
    You sound like an experienced Mac user, and you have tried most of the things that can cause this problem. You probably have already checked to be certain that your iChat > Video > Microphone Enabled has a check (tick) mark.
    If so, the next suspect I can suggest for your consideration is a possible hardware or software conflict with your "external FireWire audio interface". Disconnect it and test iSight audio again. If it still does not work, uninstall any software that was installed with your audio interface and try again.
    If that does not help, you can use any of the suggestions from How to test your iSight to ensure it is functional that you have not already tried.
    If, when you play back the file, you can hear the sound recorded with your iSight using iMovie (4 or later), QuickTime Pro, or some other app that can record audio, your iSight itself cannot be the problem. You may have a corrupted iChat preference file. Try this:
    • quit iChat if it is running
    • delete your Home(User)/Library/Preferences/com.apple.ichat.plist file.
    A new .plist file will be created the next time you launch iChat, but deleting the .plist file deletes several iChat preference settings, so those you want to be different from the default values will need to be reset.
    If all else fails, your external iSight likely needs help form an Apple Service Technician. The external iSight you bought is likely not covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions. If your external iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
    BTW, your posted system info shows Mac OS X (10.4.10), but you say that you repaired permissions from "a second 10.5.2 start-up drive." Hopefully, your posted info merely needs to be updated. Although we must start from a different disk to repair a disk, I am sure you know that we repair permissions on a startup disk using its disk utility when started from that drive. For benefit of less experienced readers, don't repair permissions for a disk with one Mac OS version (like 10.4.x) when started up from a different Mac OS like 10.5.x because doing so can cause serious permissions problems.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Cannot Restore Image From External USB

    Hello,
    I am trying to restore an image I made from a Surface Pro 2, a Windows 8, and a Windows 8.1 computer and I get the same results from all 3 computers.  The backup is successful on all 3 computers, but I am not able to restore the image.  When I
    try to restore, Windows says it cannot find an image.  I tried it on an external Seagate 500 GB HD, an Hitachi 3TB external HD, a blank HD in a USB enclosure, and a Seagate 3TB external HD.   The only time Windows was able to see the image
    was when I copied it to the Seagate 3TB drive.  Does there have to be something configured on the drive before Windows 8 can see the image?

    Hi,
    Here is another thread that encounter similar problem with yours, please take its marked answered response as reference:
    https://social.technet.microsoft.com/Forums/en-US/839aaa45-edaf-4695-ab35-b91d2f8fd5ec/system-image-restore-cant-see-usb-hard-drive?forum=w7itprogeneral
    If there is any progress, please feel free let us kow.
    Roger Lu
    TechNet Community Support

  • Complex DNS? Cannot reach XServe from inside network

    I'm trying to make DNS work on a XServe with Leopard Server installed.
    I had to migrate (mostly manually) DNS from the old server.
    The server runs DNS for about 50 websites, most of them on the server itself, some on other local machines. All these are configured with their external ip addresses.
    From inside the building i cannot reach the server unless i make a subnet so the xserve acts as a router to. Then I can also use Server Admin e.g., which I cannot use without that subnet.
    From witin the server DNS seems to work while just browsing the domains with Safari.
    sudo changeip -checkhostname
    Primary address = 10.0.2.15
    Current HostName = dns.myserver.com
    The DNS hostname is not available, please repair DNS and re-run this tool.
    So i guess i made a mess..
    host on xserve ip address (also from within xserve)
    odin:~ admin$ host 10.0.2.15
    Host 15.2.0.10.in-addr.arpa not found: 3(NXDOMAIN
    host command on external ip address gave me one of the domains, but not dns.myserver.com.
    $ host 192.xxx.xxx.xxx (of course i used the full external ip address)
    192.xxx.xxx.xxx.in-addr.arpa domain name pointer dns.myserver.com.
    Can anybody help?
    Message was edited by: skipx2

    I'm trying to make DNS work on a XServe with Leopard Server installed.
    I had to migrate (mostly manually) DNS from the old server.
    The server runs DNS for about 50 websites, most of them on the server itself, some on other local machines. All these are configured with their external ip addresses.
    From inside the building i cannot reach the server unless i make a subnet so the xserve acts as a router to. Then I can also use Server Admin e.g., which I cannot use without that subnet.
    From witin the server DNS seems to work while just browsing the domains with Safari.
    sudo changeip -checkhostname
    Primary address = 10.0.2.15
    Current HostName = dns.myserver.com
    The DNS hostname is not available, please repair DNS and re-run this tool.
    So i guess i made a mess..
    host on xserve ip address (also from within xserve)
    odin:~ admin$ host 10.0.2.15
    Host 15.2.0.10.in-addr.arpa not found: 3(NXDOMAIN
    host command on external ip address gave me one of the domains, but not dns.myserver.com.
    $ host 192.xxx.xxx.xxx (of course i used the full external ip address)
    192.xxx.xxx.xxx.in-addr.arpa domain name pointer dns.myserver.com.
    Can anybody help?
    Message was edited by: skipx2

  • Cannot Print book from iphoto (network issue)

    I cannot get a book to print from iphoto or access itunes music store through my school network. My school has a PC network, I am the only teacher to use macs in my classroom. I can access the music store through XP on parallels so I know the network connection is good. I believe the problem is a network setting either on my macbook or in our server. Our Tech cannot identify the problem. I just updated all applications to the latest versions.

    Bill:
    Welcome to the Apple Discussions. That sound more that a networking issue that should be posted in the Tiger Getting Online & Networking forum. There will be users there that should be able to address your problem.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Files cannot be located from external hard drive.

    I just moved all my iTunes content to my laptop from my external hard drive (that I had been previously using with my PC), thinking it would be available on both as long as I had the Hard Drive plugged in. When I got downstairs however, I found that none of the songs could be located on the PC from the external hard drive, even though I had it plugged in. How do you solve this?

    Then I tried to fix the problem by dragging my music from my external, to my iTunes but stopped it when I realised I was going to have a whole iTunes full of duplicates. (still got like 80 though )

Maybe you are looking for