WRT160Nv3 Problem with 3rd party internet applications Apple & Dropbox

heres my situation, had a WRT54G wireless router for several years, it kept dropping my internet connection and after several updates to firmware, I decided to upgrade to the WRT160N. Both apple computers work at blazing fast speeds, even xbox 360 which is appoximatly 40ft away in a basement works fast, netflix streaming that is built into my blu ray player works as well. Problem I am having is with Itunes and Dropbox, both use the internet to connect, but every time I try and connect I receive internet connection errors. My macbook pro supports a/b/g/n wireless, so I am not sure what the issue could be. I hve the latest version of Itunes as well as dropbox.
Also I checked the settings in my router, it is currently set to mixed mode. Do you think I would need to change it to mixed mode B-G, it seems kind of silly to have a N router and only be able to use G. Any other experiences with this problem?
Solved!
Go to Solution.

As far as your all the devices are working fine, then i don't think you should make any changes on your Router.
Well you need to open Itunes ports on your Router. Click Here and check out the port numbers for Itunes and open the ports on your Router and then try to access Itunes.

Similar Messages

Connection problem with 3rd party software

I am having a problem with a developer tool (pl/sql developer) in that my connection keeps closing whenver i query a table. i know this sounds like a software problem and nothing to do with oracle, but this happened on my friends machine and after hours of searching we found out that it was caused by a setting in a configuration file. this setting caused problems when 3rd party applications were using oracle. however, we cannot remember what the file was, and I'm wondering has anyone encountered this type of problem before and if so how do you solve it?
Thanks very much

Maybe this has something to do with connection timeout for Oracle network configuration settings:
in file sqlnet.ora (located on server side), check these values or set them
appropriately:
SQLNET.INBOUND_CONNECT_TIMEOUT
SQLNET.RECV_TIMEOUT
SQLNET.SEND_TIMEOUT
See http://download-east.oracle.com/docs/cd/B19306_01/network.102/b14213/sqlnet.htm#sthref370

Problem with 3rd Party Plug-Ins

I am running Logic Pro 7 and recently a majority of my 3rd party plug-ins quit working. When I try to load the plug-ins or open a song that uses the plug-ins, Logic unexpectedly quits. Some of the plug-ins that cause the problem are:
Spectrasonics Trilogy and Atmosphere
Plugsounds PS01-06
Ueberschall BPM120 and PLP120
Native Instruments Kompakt
This has happened before, but for some reason within two or three weeks, they just magically started working again. I could use an update on my OS (10.3.9) and some updates are available for the plug-ins, but why wouldn't everything continue to work as it had if nothing has changed? And is this absolutely necessary because I'd rather not because I'd have to update everything.

Did you update or change ANYTHING on your system? I've learnt that once I have a stable system, DONT upgrade unless you HAVE to, as updated plugins are designed to work on the most recent software, and sometimes dont get tested and/or work with "older" systems.
However, if you have not changed anything and are getting these problems, the most likely cause is either song corruption (though you said this is happening on multiple songs, so I doubt thats the problem) or preference corruption, which happened to me just a few months ago. Dont ask me how things get corrupted, but when they do you start to experience random weirdness. For example, recently all my songs stared giving me "memory errors" on stuff that use to playback fine. Once I rebuilt my preferences, every was stable again.
Here is a link to troubleshooting tips created by Bee Jay (a wise poster here). Follow them and they should fix your problems:
http://logicquicktips.blogspot.com/2006/10/troubleshooting-logic.html
Note: if you created any custom key commands for logic, do not trash your old preferences, as you can import your key commands from this file. Check your manual under import key commands. Here is a link to the PDF of the manual, which is easier to search:http://www.apple.com/support/logic/
If you want to turn off your plugins just to see if they are at fault (though it sounds to me like song/prefs corruption, not plugin problems) use the AU
manager. I'm not in front of Logic right now, but I believe its under either the apple pulldown menu, or the file menu, or one of the other menus "up top."
(sorry for my bad description). If you still cant find it, let me know and I'll look it up, but as I said, this sound like a corruption issue and not an issue with your plugins.
Best of luck!

Update problem with 3rd party application

After I updated to 10.4.3, everythiing seemed to be working fine, but I noticed that Onyx does not run properly. It gives a syntax error. IM not sure if I should reinstall it, or try another third party application? Can anyone please suggest another application similar to this to help run maintenance scripts. Also in the mean time, coudl someone please post how to run these scripts through the Terminal? thank you

To run the scripts in terminal, type sudo periodic daily weekly monthly, enter your password, and wait for it to finish. To check when they were last run, ls -al /var/log/*.out
Hope this helps!
-Ryan

Problem with 3rd party plug-ins - program sluggish

Mac 10.8.8.5, Photoshop CC
I have created a plug-in panel in Configurator 4 to be used in Photoshop CC. When the plug-in is loaded as a panel Photoshop starts acting sluggish and the shortcuts for Tools do not stick, they revert back to the originally selected tool. Switching between layers has a 1 second or more delay time.
When I restart Photoshop and keep my panel collapsed everything works as it should. As soon as I expand the panel, the above behavior returns. I have to restart Photoshop with the panel collapsed to have Photoshop work normally again.
When I restart the computer in Root mode and open Photoshop and expand the panels everything works normally. So it seems like something is being loaded in my User mode that is creating the problem. I just do not have a clue as to what that could be.
Any Ideas - Sam

Did you update or change ANYTHING on your system? I've learnt that once I have a stable system, DONT upgrade unless you HAVE to, as updated plugins are designed to work on the most recent software, and sometimes dont get tested and/or work with "older" systems.
However, if you have not changed anything and are getting these problems, the most likely cause is either song corruption (though you said this is happening on multiple songs, so I doubt thats the problem) or preference corruption, which happened to me just a few months ago. Dont ask me how things get corrupted, but when they do you start to experience random weirdness. For example, recently all my songs stared giving me "memory errors" on stuff that use to playback fine. Once I rebuilt my preferences, every was stable again.
Here is a link to troubleshooting tips created by Bee Jay (a wise poster here). Follow them and they should fix your problems:
http://logicquicktips.blogspot.com/2006/10/troubleshooting-logic.html
Note: if you created any custom key commands for logic, do not trash your old preferences, as you can import your key commands from this file. Check your manual under import key commands. Here is a link to the PDF of the manual, which is easier to search:http://www.apple.com/support/logic/
If you want to turn off your plugins just to see if they are at fault (though it sounds to me like song/prefs corruption, not plugin problems) use the AU
manager. I'm not in front of Logic right now, but I believe its under either the apple pulldown menu, or the file menu, or one of the other menus "up top."
(sorry for my bad description). If you still cant find it, let me know and I'll look it up, but as I said, this sound like a corruption issue and not an issue with your plugins.
Best of luck!

Problems with 3rd party earphones on iPhone 4

My old Nokia phone came with these amazing noise cancelling, heavy bass earphones which are miles more comfortable than the cheap plastic things that apple provides. However my Nokia earphones simply wont work with the device properly, the music sounds distorted and very flat, sometimes the song actually skips and plays at 5x speed randomly, its really strange. I've tried taken the phone out of the case and wiggling the wire around but nothing seems to work. The earphones work fine in my old phone and when plugged into my pc with no problems, these earphones have a button on them, that when held in, the iphone seems to work correctly with them, but that means i am required to constantly hold a button on my headphones which just isnt practical. Any ideas how I can fix this? Thanks!

Update iTunes on your PC > iTunes 11.1.1 for Windows (64-bit
Then restart the PC and try restoring the iPhone.

Problem with 3rd party RAM for Thinkpad T400

Hey everyone,
I just installed 1GB Hynix RAM (came from my macbook pro) onto my Thinkpad T400. At first, it booted up fine. I did all the memory tests and everything. No problems found.
However, every once in a while, when I reboot my laptop, the bios beeps once, three times, once, then three times. I looked up the beep codes and called customer service and it has to do with the memory.
Sometimes when I press the power button, the laptop turns on but the screen doesn't. I just have to force it to shut down then restart...then it's fine.
Any suggestions? (besides buying overpriced lenovo branded RAM)
Thanks in advance.

gatorman1122,
umm, i think we've already established that it's DDR3. it's absolutely impossible to make DDR2 modules work in your system even if you removed the check pin from the socket. and, even if you did get it to fit, your system wouldn't even POST. the pins are different in both quantity and mapping.
what hasn't been established, however, are the exact specs (not the type) of the module installed. what speed is the module? what's the part number? is it an original apple module or an aftermarket? again, more info is needed on what you installed.
also, what beep code are you getting? is it the beep code for memory or for something else? you can check codes in the T400 HMM if you haven't already.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Problem with 3rd party bluetooth keyboard

I just purchased a third party bluetooth keyboard (RockSoul BT-100). Unfortunately, when paired with my MacBook (2009 aluminum unibody running Mountain Lion), neither the Escape nor the FN key works. Any suggestions? Do I need a special driver?

Hello:
I suggest you contact the manufacturer of the third-party device.
Barry

Problems with 3rd party libraries used in ejb

Hi
I need to deploy a standalone ejb component to weblogic server. The ejb uses some libraries. When my client application invokes it, an exception is thrown for not able to find classes in those libraries.
I tried putting the jar files in Weblogic's lib folder, and also edited startWebLogic.cmd file to add them to classpath. It just won't work.

Also, how is the EJB deployed? if its an EAR, you should see the third-party jars in the EAR in the "APP-INF" directory (workshop created beans and built EAR has the APP-INF directory)

3rd party Internet Security disables CD Drive on Satellite A30

sorry for posting help about 3rd party Internet Security software on a toshiba forum but ive been told its to do with my toshiba cd drive. Well without it installed (which i repeatdly said to Norton) it works well but with it installed auto run dosnt work and it is very hard to access the cd drive. I reckon that many people have had and solved the problem im having so please could you share with me how to do this. Yours Sincerely,
Daniel Short

Hi Daniel,
so far as I know Norton disables the autorun function. The very slow access of the cd rom is based on the "auto check" function of the Norton Anti Virus.
But please don't ask me where to disable this function.
In my opinion, Norton was not build for notebooks , cause it disables very much functions that a needful.
I use another program... ;)
bye

ANE with 3rd party libraries

Short Version: How does one package 3rd party dylib dependencies with an ANE on MacOS?
Extended Version:
I have an ANE that dynamically links with 3rd party libraries. I am working on MacOS.
My ANE framework dylib file links with the 3rd party library dylib. However, when I package a bundle application with the ANE, the ANE fails to initialize, throwing an Error: "ArgumentError: Error #3500". I have inferred that the issue is failure to find and link my 3rd party library dylib.
If I run my AIR app from a Working Directory that contains the 3rd party library, everything works. This implies that the linker is only looking in the Current Working Directory and not the locations of the 3rd party dylibs.
I have included my 3rd party dylibs with my ANE framework, for instance:
MyANE.framework/MyANE
MyANE.framework/Resources/3rdparty.dylib
I have used otool to inspect the linkage for MyANE.framework/MyANE:
MyANE:
          libMyANE.dylib (compatibility version 0.0.0, current version 0.0.0)
          @rpath/Adobe AIR.framework/Versions/1.0/Adobe AIR (compatibility version 1.0.0, current version 1.0.0)
          ./3rdparty.dylib (compatibility version 1.0.0, current version 1.0.0)
      /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 52.0.0)
          /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 159.1.0)
Ok, you see that it wants to load from CWD. I tried changing the 3rdparty.dylib linkage, as so:
install_name_tool -change ./3rdparty.dylib @loader_path/Resources/3rdparty.dylib MyANE
but the application displays exactly the same behavior: It only works if I run from the folder containing 3rdparty.lib.
Are there some kind of additional platform options I have to set while packaging the ANE?
Thanks!
JW

Hello,
I assume your client is standalone (or runs outside of the WLS JVM) if so you will need to put the required jars on your clients classpath.
cheers
Hussein Badakhchani
www.orbism.com

3rd Party Email Application for CF

I know there are 3rd party email applications for CF ... Can
anyone point me to them and/or let me know if they have worked
better. I'm looking for more power with email (tracking, sending,
routing, etc).
Thanks,
Joe

Yeah, that might be to much. Normally, CF will directly send
to your mailserver (usually IIS mail services) and if something
goes wrong your only options reside in looking at the CF logs if
you're logging mail. But I know there are some third party apps
that do more tracking/resending then send to your mail server (and
or better bulk mail processing). In your case you've just handled
it more complexly by using an Exchange Server. That will be
overkill for me plus a good amount of time learning and installing
(not to mention price tag).
Joe

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

WRT160Nv3 Problem with 3rd party internet applications Apple & Dropbox

Similar Messages

Maybe you are looking for