WRT160Nv3 reset button broken

hi all i need help ,my plastic button in router lost somewhere,i cant reset with pen or something,doesnt work i lost plastic button when i pushed long time before,router still work but i try use my home wifi conection for nokia N95 i dont remember VPA password and when i try try instal again with cd router i have code 323 - i need use old name and password when i go online to 192.168.1.1. adin pass no work i can go online,and i cant reset factory default with puss butt for 30sec cos button broken,is some other way restore default? or find my old VPA pass and recovery? thanx for any help

Well, then the only option is to try some of your common passwords or different combination of user name and password.

Similar Messages

My nokia x6 reset button broken

My Nokia x6 reset button on right top has been broken ..and couldn't turn on the phone?
can any one help me "how to solve it"?
Thanks,
sharma
Solved!
Go to Solution.

@phpsharma
Welcome to the forum!
Unfortunately there is no other solution than to take to a Nokia Care Point for repair of hardware related issue such as this.
Happy to have helped forum with a Support Ratio = 42.5

HT1212 kids locked iphone and cant figure out password and im not able to reset phone... top button broken and itunes wont even connect to phone because its locked..... what do i do???

How to reset iphone thats locked and top button broken that itunes wont reset because i cant unlock phone??

you make an appointment at the genius bar of your local Apple Store and pay them to get your phone serviced. Then you can restore the replacement phone from your backup.

Broken reset button covered by warranty?

Whilst trying to reset up my TC, I've managed to snap the reset button.
I'm guessing this is going to void the warranty, although it didn't seem to give any, and all I did was push it in trying to feel it give any, when snap!
Any ide if this would be covered under warranty?
The trouble is, I can't now seem to get it going again, having tried every combination of restarting the MBP, TC and modem. But the MBP just won't see the TC in Airport Utility, even when connected by ethernet.
The TC is permanently stuck on a flashing amber light, and the sound of either the fan or HD spinning noisily.

Yeah - I'm going to be making an appointment at a Genius Bar in the next few weeks just before we go on holiday to get them to give the MBP a health check, as its been suffering from this :
http://www.hpwebdesign.co.uk/macbook/macbook.html
So will take the TC along as well. Unfortunately I don't have phone support, and wouldn't be able to follow their instructions anyway, what with the reset button being broken.
See what they say anyway - they might have ways and means of doing something.

Broken Reset Button on SG 300 Switch - Need to reset

I can't seem to reset my switch and realized the reset button is missing/broken off. Is there an alternate method to reset the switch to factory settings? If not, how do I figure out the IP of the web interface, it is not the default.

Mark,
Is the web interface simply not loading or do you not have the password? Your DHCP range does not matter unless there is another device on the network that is currently assigned 192.168.1.254. If that is the case you will have trouble accessing the web UI. It is usually easiest to plug ONLY a PC and the switch together and assign a static IP to the PC:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: None
DNS Servers: None
This will allow you to access the switch without interference from other network devices. Remember to change the PC back to DHCP when you are done. If you do in fact have an IP conflict you should also change the switch to a different static IP.
You can also access the switch using a console cable. You can check the settings and see if the web interface has been disabled or you can reset the password in case you lost it. Check the Admin Guide for details:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
Let us know if you have any other questions.
- Marty

Reset button is broken. Which pins do I short to reset my Airport Extreme to factory defaults?

I'm working on a 4th Generation Airport Extreme A1354. I do not know the password and I was not able to perform the software, hardware, or factory default reset procedures. (I never got the fast blinking amber light.)
I suspected a broken reset switch and took the gray cover off to find the reset button was indeed broken. Upon slight maneuvering, the button fell off the board.
I think I can perform a factory default reset by jumpering where the reset switch was. Which pins do I short to perform the factory default procedure without the reset button working?
Trying to upload pictures that show my issue.

I don't often work on extreme.. mostly Time Capsule.. but the switch is surface mount.. no pins go through the board.. you will need to lift the board right out of the frame, (it all comes out in one piece and is fairly easy to do).. and you will need to short the two pins right at the switch .. but hopefully with it right out the switch itself will become accessible.

Inactive (or broken) reset button on my Ze

Hello! I recently tried using the recovery tool on my zen V to diagnose any issues. The player had been charging on the computer for some time but was not being recognized by the computer itself (not unusual). So when I tried to use the recovery tool, it obviously said there was no player connected and thus couldn't continue the diagnosis. That is fine and dandy but the problems now are much much worse... After that, I tried removing it and re-plugging it in. The player was detected but not recognized by the computer (strange, I've used it on this computer before). I wasn't overly concerned yet but then the player itself started acting strangely --> freezing while "restoring library". I used the reset button and went to the recovery mode to reboot the player. The player rebooted successfully and restarted the song it had cutoff when the battery died. I tried going to other menus and then the player froze again. Once again, I used the reset button to get into recovery mode and tried to re-boot. It once again froze when trying to restore the library... so I tried the reset button yet again. Finally it loaded, started playing the song again and when I tried switching the menu, it froze YET again! Now, my reset button will not work and it is stuck with the screen on, sitting in the menu section. Does anyone have any suggestions as to what I can do I've owned the player for < year.

Mark,
Is the web interface simply not loading or do you not have the password? Your DHCP range does not matter unless there is another device on the network that is currently assigned 192.168.1.254. If that is the case you will have trouble accessing the web UI. It is usually easiest to plug ONLY a PC and the switch together and assign a static IP to the PC:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: None
DNS Servers: None
This will allow you to access the switch without interference from other network devices. Remember to change the PC back to DHCP when you are done. If you do in fact have an IP conflict you should also change the switch to a different static IP.
You can also access the switch using a console cable. You can check the settings and see if the web interface has been disabled or you can reset the password in case you lost it. Check the Admin Guide for details:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
Let us know if you have any other questions.
- Marty

1st Generation Time Capsule reset button broke

Hello everyone I have a 1st Generation Time Capsule 500gb that I purchased used and do not have the password for AND
the reset button is BROKEN!!!
Is there anyway to reset it without the rest button working??
I bought it to upgrade it to a 2TB drive that i already own .
Thank you guys !!!!!!!

When you open the TC to replace the hard disk you will be able to press the reset. You might also be able to fix the reset lever arm.. I have found them simply forced so far back it was bent.. and no longer able to go back.. once inside the box, I can bend it back to the correct position.. but it is a plastic hinge.. and no plastic hinge likes being bent at any time.. If it has snapped right off, or snaps off attempting repair don't worry about it.. once reset, just keep it at default or write the password on a sticker and place it on the bottom.
http://www.ifixit.com/Device/Apple_Time_Capsule
Please pay attention though to Bob's comments.. fixing the power supply is going to be necessary in the near future. Especially if you put in a large drive with high start current for the hard disk. There are lots of people who find the upgrade of the hard disk is closely followed by power supply failure or it won't even start the new hard disk.. depending on type and current demand. It is much much more for some disks even if the drive has lower consumption.
If you are a DIYer it is not expensive to fix power supply or better replace it.
Although I have suggested several repair methods this is probably the cheapest.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/cisco-adp-30rb-4pin-molex

IPhone 4 lock button broken, won't turn on

iPhone 4 lock button broken, used assistive touch for the last several months. Today iPhone turned off in my pocket and is unresponsive to even plugging it into charger. Is there any way to get it to restart?

There is nothing you can do as you won't be able to reset the device.
You can wait until the battery goes flat then try connecting it to power so it restarts. If the same issue occours then you'll need to restore it on iTunes by entering recovery mode.

Zen X-fi cannot be turned on and reset button is useless

Hi, I, ve been using my new zen x-fi 8gb for almost a month, i've tried transffered any media files and the player was working ok. however, today my player does not want to start at all and i tried pressing the reset button but nothing happen. i also tried to connect it to my PC (XP SP2), and all i heard was the blip sound from my PC, but my PC does not detect my mp3 player nor my player turned on. I've tried to connect it to the back usb port, plug it to ps2 and wii usb port, but still does not work.
additional information:
. i fully recharged the player last night
2. i tried half connect my headphone to the playe, and i still hear a hissing noise from the player when i tried to turn the power on, but still nothing appear
3. i just tried the tips that required to press and hold play button, press the reset and slide the power button, but didn't work
thanks for the help, i really need every suggestion
Message Edited by dewa_botak on 06-2-2009 09:2 PMMessage Edited by dewa_botak on 06-2-2009 09:3 PM

Your screen may be broken? Its still inder a one year warranty.

Ultrabeat - reset button

HI
The reset button on Ultrabeat doesn't seem to be having any effect at all. When in Step mode pressing it does not make the values of the selected parameters (re)set to one?
Manual
• Reset: All off set values for the selected parameters set to 0(no offset).
• A second click on the Reset button removes the parameter from the off set menu.
Note: The Reset button at the left of the velocity/gate row changes to Delete when
clicked once. This Delete button mirrors the behavior of the Delete command: It deletes
all steps for the currently selected parameter.
I am finding that none of what the the manual says above actually works
Is anybody else finding this? In L8 I'm sure that the reset button did something.
Thanks

zalermon, welcome to the discussions!
There is a workaround for the broken reset button, but the trick will be to get AirPort Utility to identify the Time Capsule (TC) so that you can access the menus.
Power down the TC for a few minutes as well as your computer. Connect an ethernet cable from one of the LAN ports on the Time Capsule directly to your computer.
Restart the TC and let it run for a few minutes, then restart your computer and open AirPort Utility to see if the application can "see" the TC. If this is not successful at first, leave AirPort Utility open for 10-15 minutes. Sometimes the TC will just "appear" after a period of time.
If you can get Airport Utility to see the TC, click on Manual Setup.
Now go the the Base Station menu at the top of your screen in the toolbar next to the Apple icon. Select "Restore Default Settings". This will accomplish the same task as a hard reset and will return the TC to factory defaults.
Once the TC restarts, you may need to repeat the procedure to find the TC so that you can reconfigure it.

My G4 powerbook starts up but with a black screen. The reset button does not work. Does anyone know the keys to press on restart please ?

My G4 powerbook running OSX 10.3.9 starts up with a black screen. The reset button is not working. Does anyone know which keys to press on restart please.?

Try holding the shift key while booting to get Safe mode if possible.
See links for more info.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

I bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent !

i bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent ! ( even if you wrote a worng ID like ( asdasdasd ) it will say sent !! how come and now am trying to know or need a hint on that email so my freind could try to remember it !
to those who will think that this phone is stolen , no its not and i would love to go to apple store if there is 1 in jordan so they can help us ,
i have everything with this iphone the box the catalog its serial number , everything but the ID and the (and apple ID is everything as you know)
so please if anyone have any suggestion to help me , and even apple it self if the can help me to get a support from them cause i tried everything to contact them by mail or any other option since as i said there is no apple store in jordan

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

How to get the submit and Reset buttons on bottom of the page?

while viewing a parametric form in the web browser i get SUBMIT
and RESET buttons on the top of the form which doesnt look good.
I tried pasting the whole html available by default in the
Before Form Value(where the submit and reset buttons are
defined) in the After Form Value property of the report property
pallette. Though the layout appears as i wanted but its not
passing the parameters values to the query but generates an
error " REP-0788 Warning : The value of restricted LOV parameter
BV_FROM_DATE is not among the selected values.". What can be the
solution to this problem? Your Help is much appreciated. And
also the report generated in the Runtime Previewer shows all the
colors of the fields but its not shown on the web browser where
can i define them...Your Help!!!!Thank you very much in
advance..

when you select 'list of values for the parameters' there is a choice box that says 'restrict list to Predetermined values'. Don't select it. This will solve your first problem.
Second:When you run the report on the web you must choose ' desformat=htmlcss' then you can display the report as in the preview window. But still you can't see the same view in the web browser on report builder. It is still not good. As I sad before you can see the right view when publishing on the web.

E3000 Pressed reset button on back. I just want my old router back :(

Hey all. I have an E3000 router that I love. One day after coming back from a vacation, I noticed another computer that wasn't mine connected to my network(I live in an apartment complex). I tried logging into my router but had completely forgotten the login info. Knowing me I push buttons first, ask questions later and hit the reset button on the back. Terrible idea, I had no internet connectivity at all wired or wireless. The only way I could connect was through my modem. After chatting with Cisco tech support and changing a bunch of ips, dns. I was able to connect wireless devices. But something was still missing. My printer would still not connect, and my NAS was unreachable. Here is where you guys might help me. Is there any way to return my E3000 back to its original fresh out of the box state? I was able to connect everything to it and everything played nicely with each other. Please, I just want my old router back!
Thanks
Eric

wumbo6 wrote:
when i chatted with the cisco support guy he walked me through manually changing all my settings. yea i tried power cycling.
Can you tell what is the IP address of the router? the printer and the NAS?
Yesterday is history. Tomorrow is mystery. Today is a gift.

WRT160Nv3 reset button broken

Similar Messages

Maybe you are looking for