WRT1900AC does not block internet access in Parental Control

Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you

What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help?  Internet Service Provider and Modem Configurations  
 What ISP Service do you have? Cable or DSL?
 What ISP Modem Mfr. and model # do you have?  Router and Wired Configurations  
  Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives. 

Similar Messages

  • How to install Adobe Reader on a PC which does not have Internet Access?

    Hi
    I have a neighbour who does not have Internet access. He wants to be able to open PDF files. He is using 64 bit Windows 7.  Is there a link to an EXZE file that I can download?
    Thanks
    Geoff

    Hi Geoff
    Have a look at ftp://ftp.adobe.com/pub/adobe/reader/win/
    Regards

  • Where can I download a full version of Firefox that does not require internet access for installation?

    I have a computer which needs Firefox but it does not have internet access. Could I download a full stand alone version of Firefox, copy it to a USB memory stick, and install it from there?

    Yes, the Firefox download is complete - no need for a internet connection for installation.
    http://www.mozilla.com/en-US/firefox/

  • My guests does not get internet access through my guest network

    I have created a guest network on my time machine. The problem is that my guests don´t get internet access when they choose the network and type the password. I don´t understand why this is happening? My ordinary network is fully functional.

    If you are using 7.6.3 firmware on the TC, the guest network does not actually work in bridge mode.. it looks like it does.. but nope, it doesn't.
    Make sure the TC is the main router in the network.

  • No internet access when Parental Controls are enabled.

    I have a MacBook Pro running Leopard(OSX 10/5.8). Until recently Parental Controls worked flawlessly for my kids accounts. Within the last few weeks something happened and now the kids can't get to any websites with Parental Controls enabled.  Every URL we try we get a "can't connect to the server" message in Safari. Switching their accounts to standard fixes the issue so it is definitelyt a Parental Controls issue. I created a new account and see the same issue if I make it a managed account. Nothing has changed with our setup. i.e. no software upgrades, router changes etc. Any help would be greatly appreciated. Thanks.

    I'm experiencing the same issues. I've tried some of the work-arounds that people reported as working for them, but they haven't solved the issue for me. I don't know if this is a good clue, but here is the error log from /private/var/log/apache2
    [Thu Feb 14 11:49:37 2008] [alert] (EAI 8)nodename nor servname provided, or not known: moduniqueid: unable to find IPv4 address of "lab-12-53.neiu.edu"
    Configuration Failed
    [Thu Feb 14 11:58:11 2008] [alert] (EAI 8)nodename nor servname provided, or not known: moduniqueid: unable to find IPv4 address of "lab-12-53.neiu.edu"
    Configuration Failed
    [Thu Feb 14 13:15:21 2008] [alert] (EAI 8)nodename nor servname provided, or not known: moduniqueid: unable to find IPv4 address of "lab-12-53.neiu.edu"
    Configuration Failed
    [Thu Feb 14 13:18:17 2008] [alert] (EAI 8)nodename nor servname provided, or not known: moduniqueid: unable to find IPv4 address of "lab-12-53.neiu.edu"
    Configuration Failed
    I hope wiser heads than mine can help solve this.

  • HP Pavillion dv6000 shows it is connected to Airport Extreme Guest network, but does not allow internet access.  Anyone have ideas what to do?

    My MacBookPro works fine on both primary and guest networks.  HP info shows excellent signal strength.  Web page won't open.  Tried reducing security level from WPA2personal to WPA.  Tried entering TCP/IP addresses manually in HP.  I'm told that the HP works with other WiFi routers and can access Internet through other WPA2 setups.  I'm out of ideas.  Help?

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • Security Bulletins for a computer not having internet access

    Where do I download Adobe Security Bulletins from to install on a computer not having internet access?

    You cannot download anything on a computer that does not have Internet Access.
    You can view security bulletins on another computer with Internet Access: http://helpx.adobe.com/security.html
    If you need to download offline installers: http://get.adobe.com/reader/enterprise/

  • Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
    This may or may not correct your problem - call back if it doesn't.
    Clinton

  • WRT54Gv3 Looses/Blocks Internet Access

    After installing version 4.21.1 of the Linksys frimware on my router WRT54Gv3 it will loose and/or block access to the internet. It will do it at random times usually weeks apart. All the lights on the router look normal, my modem still shows a connection to the router. My computers will connect to the router wired or wireless and I can also login to the config page of the router. Visually everything looks fine. Power cycling the modem and router does not fix the problem. I have to perform a factory reset on the router before it will work again. Is anyone having this problem with v4 or below of the WRT54G router after installing 4.21.1 of the linksys firmware? My friends router does the same thing and he has v4. I have v3.
    Thanks

    Well my router has always had the default IP address.
    I also noticed that when the internet is being block that i can use the diagnostic tab and get a response using ping and perform trace routes.
    I can also release and renew my IP info from Comcast's DHCP Server.
    I've never had a signal issue with the router. I'm always able to connect to it using a wireless or wired connection. I connect successfully to the router it's that it blocks access to the internet to all the connected computers.
    I'm at a loss and so it seems with Linksys tech support. I had a chat with them and they made me do a factory reset then update the firmware and then perform a factory reset again. They felt that the firmware may have been somehow damaged when I previously updated the router. I feel like my router will start blocking internet access again by the end of the month. If not I'll let you know if resetting, flashing, and resetting thing worked.
    Message Edited by phoenixms on 06-05-200703:40 PM

  • How do I download Adobe Flash Player for a computer that does not have internet?

    How do I download Adobe Flash Player for a computer that does not have internet?

    Hello Walter,
    that's it, usually you get and Adobe Flash Player Installer only.  For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
    Hans-Günter

  • OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi,
    I have one client and one server.  In both hosts I created an OS-user named User1.
    The user have been given various role under the prefix SQLServer2005.
    The default instance of SQL Server and instance (background-process) of
    Analysis Service are also run under User1.
    I connected via Management Studio to Analysis Service directly in the
    server.  I set the permission to access Analysis Service to Everyone. 
    This means everyone should be able to use Analysis Service.  I have set
    ODBC data source to the server.  Testing was successful.
    I created a project to create a cube.  The tables are fairly small (total 300 MB, biggest one 290).
    On project setting (created at client) I set the server host as
    deployment target. I managed to deploy project when all I have are Data
    Source and Data Source Views.
    But on deployment I always failed.   The errors remain the same, begins with
    OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
    I have tried 4 combinations of Impersonation :
    (A) Use a specific username and password
      * in which I supply User1 and the password of User1
    (B) Use the service account
    (C) Use the credentials of the current user
    (D) Default
    Why is this? The server does certainly exist.  I think the error message is wrong.
    I have seen 3 posting that seems related.  One of them say the solution is giving the right impersonation, but gave no detail.  About the privilege, User1 are granted the role of
    SQLServer2005MSOLAP.  What is the solution?
    Thank you,
    Bernaridho

    I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
    Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
    require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
    So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
    used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

  • TS1398 my wifi is showing connected but i am not getting internet access.  When  in the settings wifi settings  you can see the wheel or timer spinning but never a check mark like my other iPad.

    my wifi is showing connected but i am not getting internet access.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • WRT54G v8 firmware that does not block ports?

    Hello everyone! Is there a 3rd party firmware for the WRT54G v8 router that does not block ports or has the option to disable port blocking? I would like all ports to be open on all devices in my network. Thank you!

    This setting is not recommended because it opens your entire network to attack.  Instead, you should selectively open only the ports you need to play your Internet games.
    People who open all their ports often get their computers infected with viruses which send out spam.  When your ISP sees you sending spam, they will turn off your email, IM, or even disconnect you.

  • The build directory of the test run either does not exist or access permission is required.

    i am trying to run automated tests
    i follow the steps in the web but when i have 2 issues that does not solve
    1. i created console project and add build definition without drop folder and queue builds that success.
    2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
    3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
    4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
    5. when i try to associate the builds for the test plan i have a PROBLEM(1):
    this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
    a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
    and than when i try to run the automated tests i have this PROBLEM(2):
    The build directory of the test run either does not exist or access permission is required. and the test failed.
    Please Help
    Roey

    Hi Rory,
    Thank you for posting in MSDN forum.
    According to the error message:
    (1) a pop up shown with error : " The build that you selected for this plan no longer exist "
    I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
    with yours like the following screen shot.
    However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
    After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
    Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
    http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
    In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
    I know that the error message occur in either of the following conditions:
    1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.) 
    2. The build directory itself does not exist.
    So please refer the following blog to check this issue:
    http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
    Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "File does not exist or access denied"

    Hi
    I am new to FDM. I am trying to import a .csv file in FDM using Import Format Builder. When i select the file in the Inbox folder of my application, it gives me the message "Error: File does not exist or access denied".
    Any ideas why this error is coming. I have been struggling with this error for some time now.
    Thanks in advance

    Hello,
    I do not think it has anything to do with the configured ID for the AppPool and would not suggest tinkering around in it, as it can damage the application significantly.
    Some concerns that I have are the following:
    1. When you get the error, do you get a 'white' fish?
    2. What does your UserError Log state? Clear it and reproduce the issue and post the results.
    3. What does the Import Log state? (Import button on the View File tab of the Import Fish)
    Thank you.

Maybe you are looking for