Wrt1900ac (I changed the local ip of the router after a power outage)

I changed the local ip of the router after a power outage,which brings me a lot of trouble because I have everything set up based on a class C network (192.168.1.x) and I changed it to a ip Type A (10.xxx), someone happens the same there any solution ?

Hi juanmanuelvazquez. Have you tried to do a hard reset to the unit and reinstall it from scratch? I suggest that you do so as power interruption normally brings the router back to default settings thereby messing up the network. To do the proper reset, please press down the reset button at the back of the router for 30 seconds while the device is powered on. Release the button and unplug the device. Reinstall everything from scratch.
Hope that helps.

Similar Messages

The Local section of the Yahoo front page is stuck on New York, and I'm unable to change it to my city. IE does not have this problem.

The Local section of the Yahoo front page is stuck on New York as the default, and I'm unable to change it to my city using the normal procedure. IE does not have this problem. This is a new problem that has occurred with the latest version of Firefox. Since the same problem doesn't occur with IE, I've concluded that this is a Firefox issue and not a Yahoo issue. Please advise.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

How to get the absolute path of a file from the local disk given the file n

how to get the absolute path of a file from the local disk given the file name

// will look for the file at the current working directory
// this is wherever you start the Java application (cound be C: and your
// application is located in C:/myapp, but the working dir is C:/
File file = new File("README.txt");
if (file != null && file.exists())
String absolutePath = file.getAbsolutePath();

When I try to send an email I get a message - Non ASCII characters in the local part of the recipient address.

I am trying to send an emails to Italy. When I click send I get a message ( Non-ASCII characters in the local part of the recipient address). [email protected] is one of the email address I am trying to send to. My other email address' work OK. I have sent emails to these Italian address before with no problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Pre-requisites required for the local configuration of the Weblogic portal

Hi All,
I have got the code from the client. It is appenntly came to know that Code has been developed in Weblogic workshop.
When we build teh application we are getting the following web services related Errors:
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
PortaleWebApp: Created control beans for 19 controls in 12703 milliseconds
BUILD FAILED
ERROR: Build failed with 15 error(s).
When we deploy in the Portal weblogic server, Application is deploying with out any errors. But it is not showing any login page when I start the PTLoginMain.portal file.
As I am completly new to this Weblogic Portal server, Please let me know, Do i need to configure the any setting before starting the application. I mean to ask you that Pre-requisites required for the local configuration of the Weblogic portal Server.
Any Help would be much appriciated.
Regards & thanks,
Nirmala Vijaay Sekhar Varre

and your server address can be resolved or not?
Are you accessing the server from Windows or Linux?
- On Linux try editing the /etc/hosts file and add something like: 10.241.110.105 server1.etcetera
- On Windows try editing the C:\WINDOWS\system32\drivers\etc\hosts file and add something like: 10.241.110.105 server1.etcetera
When this works, contact your system administrator and ask him or her to map an ip to your hostname in DNS and DHCP
such that the servername automatically resolves the ip-address

Just bought a brand new ipod nano and downloaded an audiobook borrowed from the local library. The book is there and playing but, I cannot hear anything. What am I doing wrong?

just bought a brand new ipod nano and downloaded an audiobook borrowed from the local library. The book is there and playing but, I cannot hear anything. What am I doing wrong?

Does the same file play normally in iTunes? Do other audiobooks play normally on the iPod?
How does "borrowing" work? Does it require use of another app, other than iTunes, to get it on the iPod?

Using the local db in the netweaver developers workplace

hi guys,
is it possible to use the local db of my developers workplace?
I am planning to create jsp-pages in the netweaver developers studio (nds) and want create some db-table for my application (create and update statements). how can I access the local db in the nds? do I need a special jar-file like in jdbc to handle the communication with the db?
In a later step I want to migrate this application into the local sap portal.
thanks
thorsten

hi thorsten,
the access information about your local max-db is shown in the sapmmc.
the preferred way to access databases is by using jdbc datasources
--> http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/content.htm
and the following link to get familiar with driver class and connection string:
--> http://help.sap.com/saphelp_nw04s/helpdata/en/43/313c13198d0d26e10000000a1553f7/content.htm
or: Can we connect from Portal to MaxDB with the trial version of SAPNetWeaver?
hth, regards and merry x-mas to you, too
regards, jens

Does @Variable() can get the locale infomaiton of the enduser

hi, all
like the @Variable('BOUSER') can get the current user of the webi or universe, does @Variable() can get the locale infomaiton of the enduser?
thanks.

@Variable provides a default list of options.
I posted the list in this topic on BOB - scroll down to it:
http://www.forumtopics.com/busobj/viewtopic.php?t=142539
The extended discussion also explains that while you can create other parameters, you will be responsible for maintaining them through something like the Windows API.
Regards,
Mark

How does the local copy of the universes work?

To whom it may concern:
We are using BO 6.5.1.Normally the local copy of the used universes will be updated from the repository when we open BO documents and select universes. However, recently we found that this "update" sometimes failed and cause an message windows full of garbage messages. We have to delete the universe we used under "C:\Documents and Settings\53170\Application Data\Business Objects\Business Objects 6.0\universes" and, then, the "update" resumes.
Please provide me with the knowledge about how the local copy of universes updates? And, how to avoid the above problem? Thank you!
Antonio

Hi Yun,
Following information might help you to resolve the issue.
Whenever you alter and export the universe to the repository, Business Objects does not automatically update the local copies of the universes on each machine.
Only when the users access to the same (altered) universe next time or makes a report from that universe from there local machine, then Business Objects first compares the altered universe with that of old universe (local copy) stored in the machine, only then Business Objects imports the altered universe in the useru2019s machine or replaces the old copy with the altered one.
Solution:
In BusinessObjects, click on Tools > Options > General tab. Place a check in the box to 'Automatically import universes'.
End users will now import the updated copy of the universe whenever they open the report.
Regards,
Sarbhjeet Kaur

HT202157 Apple TV says it is updating date and time after a power outage here. But nothing happens. The wheel just keeps spinning. What do I do to be able to use my apple tv?

Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens.. The software is updated and my wifi router is on and working fine and recognized by the Apple TV. How do I get Apple TV to work again?

Thanks for the tip. Unfortunately "Restart" did not change the situation. I then used the "Restore" option. After about 45 minutes of the unit going through the process, Apple TV was up and running again.

After several power outages, there is only a white screen, an apple in the center and a time strip after the strip is complete it turns it self off what is this problem

I have a 27in Mac desk top, its about a 2009, after several power outages and the computer pluged up and on now when turn it on it shows a white screen, apple in the center and a time strip toward the bottom when the time strip goes to the end of the cycle it shuts its self off.
The only thing we have tryed which was from a forum which was simular problem was, command-option-p-r, hold them down til the screen was back up, we try several times it did not work, please,please some-one help we use this computer for our job.

Also the trick you used, is known as resetting the PRAM. Not always the best of ideas for Macs older than 4 years. But I'm glad it worked for you. There is a battery which will eventually need replacing inside that would actually make that technique stop your Mac from working until replaced.

After a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. How do I fix this issue?

I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?

System.log says USB related message?
Resetting SMC as well as NVRAM could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Where on the iMac is there a record of a power outage?... time?, duration?

Where on the iMac is there a record of a power outage?... time?, duration?

Nope, the APC BX1500G Back-UPS XS 1500 UPS uninterruptible power supply http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=BX1500G got activated. APC PowerChute Personal Edition Software http://www.apc.com/products/family/index.cfm?id=129 needs to be made compatible!... with OS X 10.6.8

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.

Verizon won't honor my contract...I'm going to the local news and the FCC

On Friday I called Verizon because our 2 yr contract was expiring and, frankly, I didn't want to renew. I just wanted to know what my options were as far as disconnecting our FIOS services. I have had two years of nothing but troubles with Verizon and wanted to be rid of them. However, I ended up speaking of {edited for privacy} from the Rentention Department, who offered me a very good deal to stay. And, I have a confirmation number for that contract. Within two hours after I got off the phone with her, we lost our phone service as, even though she verified with me that we were keeping our copper phone, the system switched us to a FIOS phone. This is Tuesday night. I can make phone calls out, but incoming callers are now told our phone service has been disconnected. I called tonight and spoke with "Mike" who told me that Verizon would not honor the contract that Maureen gave me. To say the least, I am infuriated. I have already contacted a friend of mine who is a reporter for our local news channel, and will be contacting the FCC tomorrow regarding possible legal implications.

BethH,
We are glad that you now have your services back. We value you as a customer and will work to get the contract that you were promised or a comparible contract. Please feel free to contact us if you need any further assistance.
Thanks,
Tonya D.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Wrt1900ac (I changed the local ip of the router after a power outage)

Similar Messages

Maybe you are looking for