WRT1900AC not connecting as AC is this Hardware or Firmware?

I know there has been a lot of discussion about the WRT1900AC. So far I have been blessed and have not had the disconnect issues. But I am curious I have a Nexus 5 which is AC capable but I never seem to connect at that rate. The best I seem to get is 533Mbps. I have tried all the different settings that I everyone is suggesting is the various threads, but the best so far for me is everything set to auto and mixed signal on the 5ghz. So any ideas as to why I am not achieving AC? From what I can tell there are no other 5ghz interference
So how would you know if this was a hardware or firmware issue? I am beginning to wish I had returned this router, but unfortunately I just missed the the deadline for full refund. Thanks as always for any input.

In theory, that could be wireless-n speed, but is much more likely to be wireless-ac in actuality. So yes, again, I think that you're there, assuming that you have the settings for 5GHz. band that I mentioned.
Again, I don't know what speeds the Nexus 5 is capable of, or how many streams it supports. it may be that you can speed things up when new firmware comes out. Not sure how stable this firmware is with wireless-ac, given the story I'm hearing that unless you set the mode to wireless-n only you get reboots. When my WRT1900AC connects with my 2-stream USB wireless-ac adapter, it has a connect speed of 867Mbps on 5GHz band, but I also get spontaneous reboots. I'd rather use wireless-n and have no reboots (if that's indeed the case), than have faster speed and have the router crashing.

Similar Messages

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

TS1424 Hi, I am getting this message iTunes Help is unavailable because your computer isn't connected to the Internet but I know I am conected can you help me to see why I can not connect to iTunes. This is a HP notebook.

hi, I am trying to update my ipad to the latest version of IOS but first I want to backup my information into itunes but I am getting a message that said that I am not connected. can you please help me?
Thanks.
Marcela
<Email Edited by Host>

Hey marcela5383,
I'd start off your troubleshooting of the issue with the following document:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Sincerely,
Delgadoh

Can not connect to DB after this message: ORA-1654: unable to extend index

Hi Experts;
Right now I got this problem in my DB, ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX.
But, I was trying to connect to the DB, but it's not accepting connections.
This DB is oracle 9i , running in Red Hat Enterprise Linux ES release 3.
I was looking thru google, but all the options is to alter the tablesplace/datafile, but I can not do that, because I cann't connect.
Have an idea, what can I do?
Please, any idea is welcome.
Thanks for your help.
Regards
Al

Here are the lines requested:
hu Jun 14 22:00:21 2012
Thread 1 advanced to log sequence 52031
Current log# 3 seq# 52031 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52031 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Fri Jun 15 05:00:36 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Fri Jun 15 21:00:46 2012
Thread 1 advanced to log sequence 52032
Current log# 2 seq# 52032 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52032 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Sat Jun 16 05:00:48 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Sat Jun 16 19:07:19 2012
Thread 1 advanced to log sequence 52033
Current log# 1 seq# 52033 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g1_01.log
Current log# 1 seq# 52033 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g1_02.log
Sun Jun 17 05:00:20 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Sun Jun 17 22:00:48 2012
Thread 1 advanced to log sequence 52034
Current log# 3 seq# 52034 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52034 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Mon Jun 18 05:00:19 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Mon Jun 18 22:00:47 2012
Thread 1 advanced to log sequence 52035
Current log# 2 seq# 52035 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52035 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Tue Jun 19 05:03:21 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Tue Jun 19 19:09:42 2012
Thread 1 advanced to log sequence 52036
Current log# 1 seq# 52036 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g1_01.log
Current log# 1 seq# 52036 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g1_02.log
Wed Jun 20 05:00:34 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Wed Jun 20 21:22:40 2012
Thread 1 advanced to log sequence 52037
Current log# 3 seq# 52037 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g3_01.log
Current log# 3 seq# 52037 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g3_02.log
Thu Jun 21 05:00:54 2012
ORA-1654: unable to extend index RADIT.RADITDATA_USERNAME_IDX by 8192 in tablespace RADIT_DATA_IDX
Thu Jun 21 21:00:12 2012
Thread 1 advanced to log sequence 52038
Current log# 2 seq# 52038 mem# 0: /home/oracle/oracle/product/10.2.0/redo/redo_g2_01.log
Current log# 2 seq# 52038 mem# 1: /home/oracle/oracle/product/10.2.0/redo/redo_g2_02.log
Hope you can get a better idea of this problem.

My new Airport express mysteriously dropped all signals, I reset it and only my iMac is now connected to my network. My iPad, iPhone 4S and Roku box will not connect - any solutions to this?

My new Airport express mysteriously dropped all signals (due to lack of DNS settings ?!?!), I reset it and only my iMac is able to be connected to my network. My iPad 2, iPhone 4S and Roku box will no longer connect. Any solutions to this? Everything was using my netwoek before.

Did you power down your modem prior to resetting the Express?
If not, do it now. Leave it connected to your Express while you power it down. Let it rest a moment or two, then power it back up. Once it restarts, determine if all your other devices are able to connect.

HT1349 Mi itunes does not downloads latest swoftware when I click check for update it appears a sign that says "iTunes could not contact the iPod software update server because you are not connected to the internet" this happens even though I am connected

My iTunes does not downloads the latest software when I click check for updates or download latest version, a message appears "iTunes could not contact the iPod sortware update server because you are not connectet to the internet" even though I am connected, can some body help me?

If necessary, also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Why am I getting " apple TV can not connect to server at this time, try Later?

I.m trying to connect to NetFlix and get the above message. What's going on???

Power cycle the ATV and router.
If the problem continues, on the ATV select Settings > General > Reset.

I have a 13" mac book osx version 10.6.8 that will not connect to my router, all software and firmware are up to date.

any one have similar problems?

also, all other devices will conect to the router via wifi or ethernet.

My computer says I am connected to wifi, but when I go to use the internet, I am not connected. What do I do?

I have tried to reset my wifi and use different wifi systems. I am in college, so I have tried to use the internet both on campus and in my home in Dallas, neither of which worked. I JUST WANT TO HAVE INTERNET.

My computer says I am connected to wifi, but when I go to use the Internet, I am not connected.
Usually when this occurs on one Wifi and Internet connection, the wifi router is working, but the router connection to the Internet Service Provider is broken. Resetting the modem or router/modem combination often results in a new connection to the ISP being established (baring any data caps limits, line, modem or ISP troubles)
However your mentioning it's not connecting anywhere your going on wifi or Internet, which could mean your machine has been compromised and possibly blacklisted until it's cleaned up of malware, or you tried to self solve your earlier issues and messed up your Network settings.
I tend to lesser think it's a actual hardware problem, but it might come to that eventually.
You should test the compromised/blacklist theroy by using a Ethernet cable to the modem you know has a good Internet on and powering on/off the modem. (if a router/modem combination, then no need). If you get Internet and not kicked off in a few minutes, then your machine is fine, likely messed up Network settings are too blame.
You can clear everything out by creating a New Location by editing locations and creating a new one, also by going to Airport Advanced > Airport and deleting all the previous connections to start over new. Reboot.
Connect manually to your home network and save in Keychain when it asks.
If this is all too much for you, take it to a local PC/Mac repair shop as they specialize in software/network issues.

Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
James

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

Safari says not connected to internet- System Prefs does...

OK, I'm not extremely computer savvy, but I'm not totally ignorant either. But I have a network connection problem that I have absolutely no idea what's going on. I have a black MacBook Pro, and am running 10.4.11. I have an airport express at home, and never had any access/connection trouble. Where I work (a university), there is an open network we can access, but for some reason, I cannnot. My airport status indicator shows full strength, and systems prefs gives me the connection is A-OK message with the green light, saying I'm connected to this network, but when I open Safari (or Firefox), it tells me I am not connected to the internet. Another interesting thing is when I open itunes in this situation, it finds shared music libraries on the network, but it will not connect to them. This is the only network I have ever used where this is happening. Also, other people seem to be able to access this network with no trouble with Powerbook G4s. Does anyone have similar problems or any ideas at all on this one?

My guess is that you're not authenticated on the network and, for that, you should talk to the sysops there. Most universities have "open" networks that still require authentication, meaning they're open to the university users but not to everyone.

Why will my iphone 4s not connect with my computer

i can not connect my devices help

try this assistant: http://www.apple.com/support/iphone/assistant/itunes/

Why will my Airplay will not connect to macbook pro?

My apple tv connects to my ipad via airplay easily. Yet my macbook pro continues to get a error message "Could not connect ot apple tv".

This is a network issue, troubleshoot the network.

How to solve launch_msg not connected

my powerbook g4 wont boot ;error launch_msg not connected how to solve this issue

There may be a way to start in single-user mode, enter the correct command
and then restart from there into the normal GUI. However the info in your post
suggests two different products, as PowerBookG4 cannot run Mt Lion 10.8.5...
If your computer is a MacBook, running a more recent OS X than a PPC G4
can, then your topic could be moved by a Host into the correct ASC area.
•Start up in Single-User or Verbose Mode:
Mac OS X: How to start up in single-user or verbose mode - Apple Support
•7 Mac Startup Options Every OS X User Should Know:
http://www.tekrevue.com/tip/mac-startup-options/
Depending on how you arrived at the message, the path should be clear.
If you have a complete or duplicate backup of your computer content, a
different path could be taken to attempt to erase & install a new OS X.
More information may be needed; esp. if host should relocate your post.
Good luck & happy computing!

What does 'Socket is not connected' when slow booting mean?

I updated software and restarted my mac, It didn't move from the grey screen so I powered off and on while pressing Shift + Cmd +V. It now will not not move from 'launch_msg(): Socket is not connected'. What does this mean?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

WRT1900AC not connecting as AC is this Hardware or Firmware?

Similar Messages

Maybe you are looking for