Wrt1900ac stuck during config and reset to default

Hi guys, just bough tthe wrt1900ac router. 
i am pretty savvy with routers etc, i found this ANNOYING bug and wanted to see if i am the only one...
While configuring the router to my needs (new hostname, ip, mac address filter etc etc) sometimes ESPECIALLY when trying to add a DHCP reservation the router simply (get stuck) and the only way to bring it back to life is power it off and on again...
but each time i do so it resets itself to the default values (system restore) even tho i never pushed the reset button i only power cycled it...
i started doing a config backup after each setting i do and each time it crashes i go back to the original 192.168.1.1 address and restore my config to bring it back to the address i chose (10.2.9.254). 
anyone else had this issue? i am on the latest firmware, just got the router today....
this is a VERY BAD bug.... 

PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired LAN PC while testing.
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection
I recommend trying this:
To safely update FW, 
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Update the FW using IE or FF.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. You can configure the router with out being connected to the ISP modem initially.

Similar Messages

  • Can't create bookmarks. New install, have disabled all extensions, tried safe mode and reset to defaults. No help from any of these actions.

    Hello.
    Problem statement is very simple: Firefox will not create bookmarks.
    New installation with Mint 17. New PC build with Asus A58M-A/USB3 mother board, AMD A4 6300 processor, 4 gig memory stick.
    All of the Mint and Firefox packages are up to date.
    A new profile was created for testing, Firefox has been started in safe mode, purged and re-installed and reset to defaults. None of these actions have helped.
    Here is the info from the Troubleshooting Information within Firefox
    Application Basics
    Name: Firefox
    Version: 33.0
    User Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:33.0) Gecko/20100101 Firefox/33.0
    Multiprocess Windows: 0/1
    Crash Reports for the Last 3 Days
    All Crash Reports
    Extensions
    Name: Mint Search Enhancer
    Version: 1.0
    Enabled: true
    ID: [email protected]
    Name: Stylish
    Version: 1.0.7
    Enabled: true
    ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}
    Graphics
    Adapter Description: X.Org -- Gallium 0.4 on AMD ARUBA
    Device ID: Gallium 0.4 on AMD ARUBA
    Driver Version: 3.0 Mesa 10.1.3
    GPU Accelerated Windows: 0/1 Basic
    Vendor ID: X.Org
    WebGL Renderer: X.Org -- Gallium 0.4 on AMD ARUBA
    windowLayerManagerRemote: false
    AzureCanvasBackend: cairo
    AzureContentBackend: cairo
    AzureFallbackCanvasBackend: none
    AzureSkiaAccelerated: 0
    Important Modified Preferences
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.frecency_experiment: 3
    browser.places.smartBookmarksVersion: 7
    browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
    browser.startup.homepage_override.buildID: 20141013200257
    browser.startup.homepage_override.mstone: 33.0
    dom.mozApps.used: true
    extensions.lastAppVersion: 33.0
    media.gmp-gmpopenh264.lastUpdate: 1416067922
    media.gmp-gmpopenh264.version: 1.1
    media.gmp-manager.lastCheck: 1416067922
    network.cookie.prefsMigrated: true
    places.history.expiration.transient_current_max_pages: 80569
    plugin.disable_full_page_plugin_for_types: application/pdf
    privacy.sanitize.migrateFx3Prefs: true
    Important Locked Preferences
    JavaScript
    Incremental GC: true
    Accessibility
    Activated: false
    Prevent Accessibility: 0
    Library Versions
    NSPR
    Expected minimum version: 4.10.7
    Version in use: 4.10.7
    NSS
    Expected minimum version: 3.17.1 Basic ECC
    Version in use: 3.17.1 Basic ECC
    NSSSMIME
    Expected minimum version: 3.17.1 Basic ECC
    Version in use: 3.17.1 Basic ECC
    NSSSSL
    Expected minimum version: 3.17.1 Basic ECC
    Version in use: 3.17.1 Basic ECC
    NSSUTIL
    Expected minimum version: 3.17.1
    Version in use: 3.17.1
    Experimental Features
    What other information can I provide?
    Thank you.
    Jim

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Firefox Crashing/Freezing Constantly and Resetting to Defaults

    For the past few weeks, I have been having a lot of issues with Firefox crashing. Every time I try to open up a new tab or load a web page it will freeze. Sometimes this is only for a few minutes, while other times this lasts up to an hour and I have no choice but to close the program out using the task manager, as any attempts to close it normally fail. This is most prevalent within the first few minutes after I launch Firefox, and the program has been slow in this regard for quite a while, though usable after waiting a few minutes for it to fully load. As I stated though, for the past few weeks it has been completely locking up and crashing when this happens, and it continues to happen after I have already loaded web pages and try to open new ones.
    I tried a complete fresh install, and the problem was fixed for a few days, however, after going for a couple of days without internet access and trying to get online again, the problem returned even worse than before. More than that, now from time to time my Firefox completely resets to default settings, clearing out my "New Tab" page's pinned tabs, as well as removing whichever theme I had applied.
    This glitch has rapidly made Firefox unusable for me, which makes me very upset as I far prefer it to Google Chrome. While I don't know that it would help discern the issue, below is also a list of all the extensions I have installed as well as the plugins I have that are always active, (with all my other plugins either being disabled or "ask to activate"). With the exception of "Adblock Edge", I have had all the extensions installed for several months with no issues. "Adblock Edge" itself I only installed after uninstalling and reinstalling Firefox to try and fix my issue. My current Firefox version is 35.
    Extensions:
    Adblock Edge 2.1.7
    DownloadHelper 4.9.24
    Private Tab 0.1.7.3
    Adblock Plus 2.6.7
    Plug Ins:
    Shockwave Flash 16.0.0.296
    Unity Player 4.6.1.51269

    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    *https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

  • After restart, all user settings are gone and reset to defaults

    Hi after waking up my iMac from sleep today, it appeared something had gone wrong (apps not responding…notification that my external drives had "not been ejected correctly" etc). I restarted. After restart, and logging back in to my regular user account, all user settings were missing and reset to factory defaults: Desktop reset to the "wave", Dock reset, Download folder missing (grey question mark), Dropbox unable to connect, Safari bookmarks missing (but still on my iPhone-- so it's a local iMac problem, not an issue with iCloud), small things like mouse scrolling prefs reset etc.
    Basically all of my user preferences are missing. I've seen a number of threads about how to fix some of these items individually, but seems like there is a single corrupt preference file somewhere maybe?
    I've repaired permissions a few times (there were a lot), and restarted but nothing has fixed it yet.
    I had been logged out of iCloud, but once I logged back in, my Mail came back (just my me.com account-- still missing my Gmail, will need to reset I guess), along with Calendar and Contacts-- those are ok.
    I keep all my files on an external LaCie RAID, and that all appears to be fine. Folders all intact etc.
    Suggestions?
    Thanks for your help!

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About
    Try running this program when in your old account and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Tabs: mouse over and reset- show default/effect

    Hello,
    ich have made some tabs with mouse over...
    <li class="TabbedPanelsTab" tabindex="0"
    onmouseover="TabbedPanels1.showPanel(this);">Demo 1</li>
    works so far - and set Tab number 4 as default:
    var TabbedPanels1 = new
    Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab:4});
    So the Tab-Set starts with 4 and the mouse-over effekts work.
    I have two questions- how to...
    - when the user leaves with the mouse cusor the tab area i
    want the script to show Tab 4 again
    - want the tabs to open with a soft slide effekt - when shown
    and when disappear
    Help would be nice - i am not really a programmer. ;-)

    burnster73 wrote:
    > Hello,
    >
    > ich have made some tabs with mouse over...
    > <li class="TabbedPanelsTab" tabindex="0"
    > onmouseover="TabbedPanels1.showPanel(this);">Demo
    1</li>
    > ...
    > works so far - and set Tab number 4 as default:
    > var TabbedPanels1 = new
    Spry.Widget.TabbedPanels("TabbedPanels1",
    > {defaultTab:4});
    >
    > So the Tab-Set starts with 4 and the mouse-over effekts
    work.
    >
    > I have two questions- how to...
    > - when the user leaves with the mouse cusor the tab area
    i want the script to
    > show Tab 4 again
    You could try adding an onmouseout event to each tab and have
    that even call TabbedPanels.showPanel(4) like so:
    <li class="TabbedPanelsTab" tabindex="0"
    onmouseover="TabbedPanels1.showPanel(this);"
    onmouseout="TabbedPanels1.showPanel(4);">Demo 1</li>
    > - want the tabs to open with a soft slide effekt - when
    shown and when
    > disappear
    The Spry Tabbed panels do not have any "hooks" to be able to
    change how a panel is shown, so you'd have to rewrite the
    Spry.Widget.TabbedPanels.prototype.showPanel method to change how
    showing a panel (and hiding the panel that was the shown panel). Or
    you could do something similar to what is being done in this
    thread:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1429374&enterthread=y
    Essentially, the tabbed panels have a div within them and
    that div fades in when the div is shown.
    One problem with widgets is that if you want to do something
    different than what they are designed for, it get fairly
    complicated to do if you do not know JavaScript well, so be aware
    and be ready to dig in.
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

  • My windows is stuck during bootcamp and says i need to eject disk but will not allow me to. How can I eject disk?

    When I turn on the mac to install windows in bootcamp my windows gets stuck and says I must eject disk to install but will not allow me to eject disk. How can I eject the disk?

    Deauthorizing the computer will only cause you to have to enter a password to play iTunes Store purchases on that computer. It doesn't have anything to do with media thats synced to the iPod, other than the account user name is synced too.
    Check this Apple document out -> Using iPad or iPod with multiple computers
    If you want to delete the music library on your device and make the new computer its "home" computer, choose Erase and Sync. iTunes will delete all songs and playlists on your device, and then will copy the music library and playlists from the new home computer to your device.
    If you want to move the iTunes Store purchases on your device to the new computer, choose "Transfer Purchases." The new computer must be set up with your iTunes Store account and authorized to play your iTunes Store purchases in order to transfer your iTunes Store purchases.
    Notes:
    Synchronization generally occurs only in one direction, from your computer to your device. However, if you are legally allowed to transfer song files, you can use your iPod as a hard disk3. An exception is the transfer purchases feature, which allows you to restore purchased iTunes content to an authorized computer from your device.

  • Visa resource control loses value set during config and saved to step properties in TestStand

    I'm using a Visa resource control to set the instrument handle in my VI (edit sub-step) and it gets saved into a step property of a custom step I've built at edit time. At run time the control value is intermittantly changed to "temp 0" value and I don't understand why. I have LabVIEW 7.1, TestStand 3.0

    Hi kphite,
    Are you using the Refnum to Session.vi and Session to Refnum.vi?
    You would use the Refnum to Session.vi to convert your Visa session value to a U32. Then you can pass this back to TestStand.
    Going back to LabView you use the Session to Refnum.vi to convert a U32 back to the Visa session.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • HP printer and Firefox 4.0.1 not talking....prints from Explorer fine..help, I have reset the printer in config and updated all plugins...still not working. I want to use firefox but can't if I can not get this issue solved.

    I have tried the obvious....CP and made sure the correct printer was selected and it wasn't set to print to file. I then did the about:config and reset the printer. I have also updated all the plugins with none of the solutions working.
    Please help...I really don't want to have to use Explorer everytime I need to print something.

    See [/questions/805889]

  • I have no navigation bar and firefox will not open in safe mode to reset to default config. Reinstalling doesn't work. Any help please.

    I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
    == This happened ==
    Every time Firefox opened
    == I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

  • Open in wrong drive and/or getting stuck during startup

    Please help!
    My Mac OS X (10.4.11) has two drives: one for normal use and one for backup. For some reason my Mac keeps opening up in the backup drive. I go to System Preferences and click on Startup disk, and tell it to restart in the main drive, and it still opens up in my backup. It will eventually let me over after a dozen tries (give or take a few).
    Once in a while it will freeze up during startup, get stuck during loading, or the fan will go into overdrive and I get nothing but a gray screen.

    Whew! Sounds like a potential combination of needing to repair the drive(s) and zapping PRAM. What exact model of computer (OSX is the operating system, not the computer model)?
    Boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
    Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and does a bit of spring cleaning at the same time.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    From BDaqua (couldn't have said it better):
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
    Once all is clear, you might need to reset PRAM.
    [Texas Mac Man's PRAM, battery, PMU tutorial|http://www.geocities.com/texas_macman/pram.html]
    [Apple's PRAM reset directions|http://docs.info.apple.com/article.html?artnum=2238]
    If this helps you may also need to get a new PRAM battery but we need to know more about your computer hardware.

  • HP Pavilion dv6 7039tx Notebook-It was working fine and then it suddenly got stuck during startup.

    I own a HP Pavilion dv6 7039tx Notebook.  The OS is Win 7 64bit. I made 4 partitions after formatting the 1TB HDD as the C drive would not reduce to the  40GB size I wanted through disk management.
    It was working fine till now and then it suddenly got stuck during startup.
    I talked to customer support and they said it was a OS problem and I should order a set of 6 Recovery DVDs. i want to know if using the HP recovery disk
    1) Has an option to repair the system and leaves the disk partition unchanged?
    2) It resets the notebook to factory condition?
    3) There is an option of recovery disk which I should specifically ask for?
    Thanks!!

    Hi RanSri,
    I understand you are having issues with the HP Pavilion dv6 7039tx Notebook.
    You can restore it to a previous time when it was working correctly.
    This link for windows working correctly.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5277768&tmp...
    Use this link if Windows does not open normally.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5277768&tmp...
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older ver

    Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
    == This happened ==
    Every time Firefox opened
    == either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to default

    I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
    Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
    I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails.

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer.

    My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?

    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement.  Any suggestions?

    In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement.  Any suggestions?

    In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement.  Any suggestions?

Maybe you are looking for

  • How to create a project in netbeans

    hi, i am new to this J2me.i need help.. i have downloaded one source code..http://simonepernice.freehostia.com/J2ME/ShoppingList/shoppinglist.html.. now i need to run this in my netbeans 5.5.plz if any one knows do reply me..PlZ give me in details th

  • 5.1 or 7.1?

    I am planning on building a new computer system soon and will be using it for gaming, listening to music, burning music and movies and eventually hooking it up to a television for recording to dvd on the pc and playing dvd's from the pc on the tv. I

  • White background or Black background suited for long term watching ?

    Hello,   I saw many desktop themes with white or light grey background a few years ago, but now, many of them turn into black background with white or blue or cyan or others color of fonts.   As a programmer, I am just curious about the theme: which

  • Reading entire txt file into memory?

    When you are using BufferedReader to read info into a buffer, that means you are reading the file into memory, correct? (Is that what buffer means?) I want to look for pattern matches in text files (about 1000 of them) using the regex utils. But I do

  • MSI-256 - Fast Forward/Rewind Issue...

    Folks, I'm using the MSI Mega Stick 256 with the latest firmware. All is cool, except for the fast forward/rewind function. I'm listening to the .Net Rocks radio show. The show is long - up to two hours. So I need to fast forward to get to where I wa