WRT1900AC & XBOX Slim Will not Connect

I'm about ready to give up...
Previously had xbox connect via wireless old linksys router with no issues ever. Router died so upgraded to the WRT1900AC. Great router for everything but the xbox. 8 other devices connect, fast, and great range. However. . .
xbox sees the network but will not connect
First tried dropping the network mode as other have, but that didn't help.
Then bought a bridge WUMC710, but no luck. Everything else works with the bridge, but not the xbox.
Then tried a wired connection. Still sees the the network, but won't connect.
We've also reset the xbox, temporarily removed security from the router, tried to hard coded the IP on the xbox.
Any thoughts????

Ports 53, 80 and 88 are not needed to be configured. Just 3074 and can be configuredas a Single Port Forward.
We hope he will respond with any progress and with answer to everyons questions soon. Or maybe got it figured out we hope.
dadayzee wrote:
@alexy2, how about you try and plug the Xbox directly to the modem (no router in between) and check if it will work properly? It could be that there's a NAT in the modem that's restricting the Xbox connection. If Xbox is working fine with the modem, try and open Xbox ports in the router. Xbox use ports 88, 3074, 53, 80. You may also want consult Microsoft about this.
You can use this link as your guide: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25787

Similar Messages

Xbox 360 will not connect to WRT54G Wired connection

OK I just bought a xbox 360 and the Linksys wrt54g router I updated the firmware on the router and have 2 pcs currently connected and working great i also have a wii connected wirelessly and it works great.
I connected the xbox 360 to the router and it doesnt even detect that its connected. Ive tested the cables tried 4 different ones and nothing i unhooked the router and just ran the xbox 360 to the cable modem and it worked fine so i know its not the xbox or the cables its the router thats giving me probs. i called linksys was on the line with them for 2 hours and they couldnt tell me nothing. Ive read that ppl have this router and there xboxs work fine
on microsofts site this router is listed as compatible. im lossing my patience and getting very mad about this.
no lights come on the router and the xboxs say the cable is not connected when running to the router but when connected direct to the cable modem works fine.
can someone please help or shed some light on this i would be greatful
thank

I amp having the same problem. I tried what you had said about using the xbox settings but no luck. I found a link that told me to open these ports:
http://www.microsoft.com/windows/products/winfamily/mediacenter/firewall.mspx#EMG
It says Inbound and outbound, but I have no idea what that means. I basically went to Port Range Forwading (I have the BEFSX41 wired router by the way.). It would only allow me to put in 10 . Also there is no incoming and outgoing!!?? So if there was just 1 number for the port I put that number in both Start and end, and if it had 2 number I put the 1st one as start and the second one as end.
Can anyone help me. This is redamndiculous that a person has to go through this much trouble to hook up an xbox 360.
Also I have a SD216 switch. I don't know if that matters at all.

Ethernet has self assigned IP Address,will not connect to internet?

Ethernet has a self assigned IP Address and will not connect to the internet.
I am on - Mac os X - 10.7.5
Using a BT Broadband Router, my power mac is connected to the network via TP-Link Plug POWERLINE. This has worked great for ever!
A week ago, my web connection dropped, network settings say "Ethernet 1 is active and has a self assigned IP Address and will not connect to the internet"
This seems to be a popular thread and I have followed all the answers I can find and the problem remains.
I also run a Powerbook on the wireless internet and other appliances such as, iPads, iPhones, and the wireless is fine.
My sky box and Xbox 360 (both ethernet via TP-Link) also have NO connection.
When I turn my laptops wireless off and try the ethernet cable (tried a new one too) instead, there is the same SELF-ASSIGNED IP ADDRESS issue.
This point me to the router or TP-Link network. I have replaced the router, same errors.
On my Powermac I have -
Deleted 'system configuration from the system folder - as advised by apple.
Tried swapping from DCHP, DCHP Manual and renewing lease etc.
Could anyone help at all? I am lost now as how to solve the problems.
All my TP-Link power line extenders show the correct lights, i.e., all on and yellow.
I am not experienced in networks, this is driving me mad now!
Any help would be appreciated
Thanks
A

Open System Preferences/Network
Select the Location you use at home
You may need to click the Padlock bottom left at this point if it's locked, enter the admin password to unlock
In the left hand column drag the Ethernet connection to the top of the list and remove any you don't use
Click the Advanced button bottom right
Click the TCP/IP Tab
Set Configure IPv4 to Using DHCP
Click OK bottom right and you should see the Router IP number appear and a unique but similar one for your Mac
Click Ok then click Apply and close the Panel

WET610N will not connect to internet

I purchased the WET610N to use on my HDTV to stream Netflix via my 5GHz band, but my TV, xbox, PS3 will not work with the WET610N. The TV internet connection works with the Trendnet bridge my son uses on his xbox, but not with the WET610N.
My WET610N has been configured using the CD, IP configuration page and WPS. I have set it to use auto DHCP and static IP, with the settings matching the settings on my E4200. It connects to my local network with no problem, but will not connect to the internet. I've spent hours on the phone with Linksys support and they are unable to correct the problem. They sent me a replacement bridge (thinking the other bridge was defective), but the replacement is no different. The last tme I was on the phone with Linksys support, they told me there was nothing else they could do. Now I'm stuck with a remanufactured bridge that I cannot return to the store.
Any help will be greatly appreciated as this is about to make me crazy.

Connect the bridge to the router with the Ethernet cable.
Press and hold the reset button on the bridge for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the bridge.
Open the setup page of the router. Check the wireless settings of your router for both 2.4 GHz and 5 GHz wireless band. Make sure that Wireless MAC filter is disabled on your router.
Go to Status tab and click on Local Network sub tab. Click on DHCP Client table and check for the IP address of your bridge.
Open the setup page of the bridge with the IP address. Assign a static IP address to the bridge ( for example 192.168.1.250, subnet mask 255.255.255.0 gateway 192.168.1.1 ).Save the settings.
Open the setup page of the bridge with the new static IP address. Click on Wireless tab and go to Wireless site survey sub tab.
Select your network and try to connect to the network.
If it shows connected then disconnect the bridge from the router.
Power cycle the router and bridge. Once powered on the router and bridge, try to ping the IP address of the bridge when wireless.
If you get replies then both the devices are communicating with each other.
If it does not work with 5 GHz wireless band then try with 2.4 GHz wireless band.

Remote app on my iphone 5 will not connect to itunes

The remote app stopped working on my iphone 5 and will not connect to itunes. Home sharing is on on itunes and adding new library on my remote iphone app results in veryfying passcode results in the following message on itunes 'the pascode you have entered is incorrect'. I have the feeling that the library is already added but will not connect. Any suggestions are deeply appreciated!

I had the same problem. Reinstalled everything and still nothing. Came across this article:
5 Simple Tricks to Get iTunes to Recognize an iOS Device
Quit and relaunch iTunes
Connect the iOS device to a different USB port on the computer
Reboot the iPhone, iPad, or iPod
Reboot the computer
Use a different syncing cable (if possible)
I changed my syncing cable and it worked! Try that if all else is failing.

My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My hp c4599 printer will not connect to my wireless network

My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technical

Hi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Apple TV (1st gen) will not connect to iTunes

I am at wit's end. Until a couple of days ago, my 1st gen Apple TV connected fine to iTunes. Now, it will not connect no matter what. I have tried the following:
1) restart both ATV and my machine (Win 7 running iTunes 10.7)
2) restored ATV factory settings and reinstalled software
3) hard-wire via ethernet to my computer (which some articles seemed to indicate should work - nothing happened)
4) hard-wired both my cpu and ATV to a router - nothing shows up
5) removed and reinstalled all Apple programs, including iTunes, QT and ancillary
6) vaired between hard-wired internet connection and wireless for ATV
7) did everything on this page, including open ports manually http://support.apple.com/kb/TS1453
Most frustrating of all, my wife sees the device instantly in her iTunes. AGHH!

Same thing happened to me, starting right after I updated the Apple TV firmware. I restarted both devices to no avail. I can, however, play my itunes library content from the apple TV's "computer" app. So there must be some kind of connection. What I've lost is the ability to stream music from iTunes using AppleTV as an "airplay" device.

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Just updated my iphone 4s to the new IOS6 and now my wifi is bringing up an itunes page and will not connect?

i just updated my iphone 4s with the new IOS6 update and now everytime i try to connect to my wifi it brings me to the apple page and will not connect to the wifi at all.. someone please help

I have the same problem, no way to change the old username in icloud on my ipad after update to ios7. Enybody knows a solution or where to look for a solution?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Brand New C309g will not connect wirelessly with ANY wireless security options enabled

Printer will connect via wired ethernet. I can use the http utility.
Printer will connect via unsecured wireless connection.
Printer defaults to autoconfig (169.xxx)when connected via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
Printer is in the same uncluttered room as the router.
ALL OTHER wireless network devices work fine and keep up with security changes.
I have legacy devices on the network that make me want to run with WEP.
I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
Router is D-Link DIR-655.
I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
-mooi
This question was solved.
View Solution.

Ooops, my mistake. Thanks for pointing it out.
Another idea is to make sure the firmware is updated on the router.
Also, from the control panel of the printer: Setup > Network > Wireless Network Test. It will self-test the printer radio.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New WIFI card will NOT connect correctly.

Hi,
I just purchased a Gigafast WF748-CUI wireless card for my iMac G3 running Mac OS X Tiger (10.4.10) and I followed the instructions exactly and did everything right but it will NOT connect. It keeps generating these weird IP addresses beginning with 168. but my networks IP address begins with 192. I had the same problem with my previous WIFI card on the iMac but it would work eventually. I have been messing with this one for like 2 hours and it has shown no sign of working. I even entered a manual IP address in but still nothing. The program for the wireless card says its connected but it is not (or isnt connected to the right IP anyway). What do I do?

Sooo, there's no way the CP has to "Join" a Network? Just says you're connected to 169.x.x.x?
Might try making a New Location in Network CP, turn off all other Ports, the set the IPv4 settings to Manually...
IP: 192.168.0.5
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Assuming the Router is 192.168.0.1, but change the 2nd & 3rd digits accorcdingly.

New iMac 27" WILL NOT connect the built in webcam to any websites. HELP!

Hey,
I have the iMac 27'' 2.93 GHz Intel Core i7 16GB.
The built in webcam, (and also any USB webcams I have tried to connect,) will not connect to any websites such as Chat Roulette, or any other broadcast website that requires Adobe Flash Player. I hit accept, and it just comes up as either a black screen, or says detecting video. (Depending on the site.) I have tried on multiple browsers, is there a random setting I don't know about?
The webcam works perfectly with Skype, Photobooth, iChat- but it will not work when trying to broadcast through any website.
Can someone please help me solve this problem!? It's ridiculous.
Thank you! I will paypal anyone who comes up with a working solution for me $10.00!
-AtkinsStoreFront

BUMP!

WRT1900AC & XBOX Slim Will not Connect

Similar Messages

Maybe you are looking for