WRT300N and a PS3 help

im setting up are WRT300N to a ps3. i currently have it connected to my pc wired and i want to connect the ps3 but the ps3 (or my Tmobile wing) can't detect the SSID at all. i've also tried entering th ssid manually but all it says is "The access point was not detected"

Download firmware from www.linksys.com/download and update it. After updating hard reset router for 30 seconds, and set all settings of router. See if ps3 finds the wireless network. If no, then set radio band to standard and standard channel to 1, and also set following advanced wireless settings: beacon interval to 50, fragmentation and RTS threshold to 2306 and DTIM to 2. Now try to find wireless network from ps3.

Similar Messages

WRT300N and xbox 360 help

Hi.
I just picked up the WRT300N - upgraded to the latest firmware:
Firmware Version: v0.93.9
I am using WEP security for my wireless. I can connect fine with various computers/laptops, getting good IP addresses, etc.
From my xbox 360 - fails to get an IP address.
Before the wrt300n I had a Apple Airport saucer thingy, and I had to disable security to get the xbox to get a valid IP. I do not want to disable security on the linksys - this should work.
Can anyone help out with this? Not sure what else to try here.

Hi. . .
As You Are Not Getting An Ip Address On The Xbox.You Can Try Giving In A Static Ip Address To Your Xbox(manual).You can try
Ip 192.168.1.x(10--99),
Dg 192.168.1.1--Please Check The Ip Address Of The Rtr. . .
On The Status Page Of The Router You Will Be Getting DNS1 And DNS2. . .
Try Inputting Those Also On The XBOX Page. . .
Let Me Know If Any Progress. . .

Youtube Constantly Buffering: Wired and Wireless, Please Help

Hi All,
Hoping someone can shed some light on my issue. I have a FIOS triple play bundle with 35/35 speeds. When I run a speed test I typically see 42/38. The problem starts when I go to watch Youtube videos on any of my 3 consoles. I have an Xbox, PS3 and a Wii U. The xbox and the ps3 are both hardwired into the router and the Wii U is wireless. The problem I run into is that Youtube will constantly buffer almost all the time and render the video unwatchable unless you like a white circle constantly running on your screen. This happens on all 3 consoles 9 times out of 10. The strange part is that I log onto my PC, which is hooked wirelessly and I can watch Youtube videos without any sort of trouble. Both Netflix and HBO GO and other video applications seem to be unaffected on all 3 consoles. I run into the same problem on my cellphone as well while I have that connected wirelessly where I cannot watch the Youtube videos without constant streaming. I understand that Verizon doesn't stand behind wireless speeds but the Wii U is not 12 inches below the router and I have trouble on my cell phone within 10 feet and have clear line of sight. I have called Verizon and they ran me through a speed test and since I was getting higher speeds then what I pay for there is really nothing that they can do. Any help or suggestions would be wonderful. Thanks in advance.
I have the MI424WR-GEN3I router and it is running firmware 40.20.1.
Quick Edit: just tried to watch a Youtube video on my PC which usually works the best, and I am not even able to start a video at 360P quality. I just ran 2 speed tests and receieved 43/29.
Edit: This can be closed, I just noticed there were 2 posts on the front page about this very same issue. I give up on watching youtube then I guess.

Some folks have blocked a couple offending youtube cache servers and because it routes them to better ones, or directly to youtube instead and there have been mixed results but I think a majority of people have enjoyed better speeds on youtube because of it.
You are welcome to try it as well and let us know if it helps.
Log into your FIOS Router
Click Firewall Setting (at top)
Click Yes to proceed
Click Advanced Filtering (on left)
Click Add on the broadband connection rules you have setup (either coax or ethernet). You can check which one yours uses by going to My Network (up top) and clicking Network Connections (on left), look for the one that says connected.
Change Source address to User Defined in the drop down list
Enter a description (i.e. Youtube Throttling)
Click Add under items
Change Network Object Type to IP Range
Enter 173.194.55.0 in the From IP Address
Enter 173.194.55.255 in the To IP Address
Click Apply
Click Add under items
Change Network Object Type to IP Range
Enter 206.111.0.0 in the From IP Address
Enter 206.111.0.255 in the To IP Address
Click Apply
Click Apply again
Click Reject under the Operation drop down list
Click Apply

WRT300N and SD2008

Hi, I'm trying to update my home network. I did have an older wired Linksys router and switch set up and everything was working fine.
I wanted to add wireless capability to my network and add a switch with more wired ports.
I'm now using the Linksys WRT300N and an SD2008 switch. I have 2 desktop computers, 2 Tivos, and 2 other wired jacks for connections.
The 2 desktops are both able to access the Internet.
The 2 Tivos can connect to the Internet for updates.
The 2 desktops can see the Tivos on the network.
The 2 Tivos CANNOT see the desktops (though they can see each other).
The laptop won't connect to the Internet or the home network via either of the other 2 wired jacks.
Via the Linksys Advisor, I can see both desktops and both Tivos from my desktop. I CANNOT see the laptop (no matter which jack it's plugged into).
(I haven't even tried to set anything up wirelessly yet.)
I don't have any clues at all how to fix any of this. I've tried disconnecting everything, reconnecting, it, recycling, etc.
Any suggestions?
Thanks in advance for the help!

In your computers, temporarily turn off the software firewall, including Windows Firewall, and see if that helps.

WRT54GX2 and the PS3

Hey yall I have the WRT54GX2 Ver 2 router and a PS3. Now I don't have problems getting the initial connection but what I do have a problem with is I keep getting 2 things either the error code 8002AD23 or it just says you have been disconnected from the access point. Now I have a great signal strength and I think I have tried just about every last thing I have found and still no success. I have contacted both Linksys and Sony about this they give me this they have no clue what that error code is and the solutions they gave me did not solve this problem. I see many others are having this issue if there is a messiah out there that can bring me one step closer to online gaming heaven please help me LOL.

Open routers set up page using http://192.168.1.1 …..You will get username & password ….leave username blank & in password use admin.
Click on "Application & gaming" tab.....under port forwarding sub tab....
Try opening the ports:
TCP 80
TCP 443
TCP 5223
UDP 3478
UDP 3479
UDP 3658
Let me know if it works.

My itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!!

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

HT4972 i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H.

I can't open a doc in Pages, msg says I need "newer version of Pages" but it's already downloaded and updated. Help plse

I can't open a doc in Pages, msg says I need "newer version of Pages" but it's already downloaded and updated. Help plse

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

I continually get a Java error. I've uninstalled and reinstalled firefox and nothing has helped. I've updated flash and Java.

I have used Firefox as my default browser for many years. I've recently started getting a Java error message. It pops up continually. I have updated flash and java. I have uninstalled and re-installed Firefox and nothing has helped. I have had to start using Chrome instead of Firefox which I don't care for but I don't have the java error with Chrome. How do I fix this problem? The error reads as follows:
Java Script Application
Error: syntax error

Your '''JavaScript''' error has nothing to do with the Java plugin . It is likely caused by an added extension (the earlier forum threads [/questions/944619] and [/questions/943088] mention disabling or updating the Social Fixer extension will resolve the problem).
You can read this article for help troubleshooting your extensions: [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Lost my iphone 5 and want your help to get it. Have my apple id for 2 devices

Lost my iphone 5 and need your help please since i downloaded find my iphone and can only locate my ipad

If Find My iPhone doesn't show a location for the iPhone, then unless your carrier offers some sort of tracking service, there will be no way to locate the phone other than to just look for it. Notify the police in case someone turns it in and change passwords to your Apple ID and any other online services you used from your iPhone.
Regards.

When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

WRT300N and a PS3 help

Similar Messages

Maybe you are looking for