WRT300N and laptop inconsistent connectivity
Once of twice a day I boot up my laptop and find that it has lost connectivity to the WRT300N. I'm usually able to restore it by pushing the reset button or fiddling with the software (I'm never quite sure what it is that I do that restores the connection successfully).
I have security enabled and when it works, it works great. What should I be looking for in order to make the connection more stable?
Thanks,
Nic
It seems that router setup page is not loading 100% .....
Disable firewall & antivirus software ....
Click start >> control panel >> Internet option >> Under ganeral .... click delete cookies & files .... click clear history .... click OK ....
Try opening once again the setup page....
If it still shows the same kind of page ....try upgrading of router firmware ...
Similar Messages
-
Problems galore..DS lite, and laptop wont connect
Ok, today i tried to connect my DS lite and it told me it couldnt find the IP and then i tried to connect my laptop and my laptop gave me limited access (no internet)
By the way, i have my Xbox 360, Nintendo Wii and my dad's computer all connected wirelessly and the main computer is hard wired to the router. I used a WEP code which when i entered i knew was correct was because i wrote it down. Anyway, if you have any ideas what may be preventing these items from connecting please let me know.
WRT54G Ver 6 is what i have.
If need be, im going to reset my router back to square oneHi… I would suggest you to provide static IP on DS lite and try the connection again. You may need to forward the port for the same IP address. Try the same with the laptop. If it does not work then check the WEP key once again from the setup page of this router. I think that’s what may be blocking the connection.
-
WRT300N, Sony laptop only connects at 54mbps
I've got two laptops which connect to this router. The Dell almost always connects at 270mbps. The Sony never connects faster than 54mbps. The Sony is four months old, and has an Intel Centrino Advanced-N 6200 AGN network adapter.
What do I do to get the Sony up to the same speed as the older Dell?
TIA.Follow th ebelow mentioned settings and check if that helps.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab
Here select manual configuration...Wireless Network mode should be mixed... Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings- Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...For Wireless Security
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... -
My hp printer and laptop are connected but it will not print...even though it shows hooked up...
HP Officejet J4500 using Windows 7 64-bit
Has printed before but it has been months....I am sure that updates have come thru during this time.
The printer and my laptop do not seem to recognize each other. My husband can print with no problem using his laptop with windows XP. Help!It sounds like the issue is isolated to the Windows 7 system since it works on a different computer.
Try using the Print and Scan Doctor as it is designed to resolve many printing issues. The site provides some information about how to use the tool.
If it finds any errors, it will usually attempt to fix them. If it is unable to fix the error, it should give some information about the problem and how to fix it.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.
-
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.
Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting). -
My iTunes and Laptop doesnt detect my iPhone, But it is charging when connected to the Laptop?
Try troubleshooting steps mentioned here: http://support.apple.com/kb/TS1538
-
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?
The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
Argh! -
Why isn't my ipod and iphone not connecting to my new laptop on my itunes that i have downloaded
I do not understand why my ipod and iphone not connecting to my new laptop that I got for Christmas. It did for a while and now its not. My itunes is up to date and so is my phone and ipod. Why isn't my itunes finding/syncing my ipod and iphone?!
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests -
I just bought a new pc and for our internet connection we have an airport express. My laptop can connect to it but my airport utility won't recognize it. Even though it does connect to the internet about every 15 minutes the internet shuts off. What should I do?
If you've not yet tried, unpower the AppleTV for a minute or so and restart - this occasionally corrects issues.
If not and the software update seems to have caused an issue, go to the Settings menu and choose to Restore it (this will erase all settings) to reapply current firmware.
Alternatively try to do so via iTunes:
If you see the "Connect to iTunes" screen on your Apple TV - Apple Support -
Wireless connection between cable imac and laptop Windows,
This should be an easy question so here goes. I currently have an Imac with a cable connection. I plan to buy a Windows laptop within the next week. I want to be able to access the internet with the laptop from another room. There are airports and routers from Apple and wireless network cards for Windows. I'm confused. What's the simplest way for my Mac to wirlessly connect to the Window's laptop so that I can access the web from another room?
1. Your new laptop needs to have a wireless card.
2. You then need a wireless router with several lan ports.
The iMac will connect to the router via ethernet cable to one of the lan ports and your laptop should connect via the wireless connection. There are many wireless routers out there that will do the job. Check out the Linksys wrt54g. make sure your laptop comes with a wireless card built it.
Maybe you are looking for
-
Can I Upgrade my OS or Should I Buy New Laptop?
OK, so I have been out of the Apple loop for quite some time. This laptop is from 2008. I love it, but the OS is too old. I can't update Firefox or download Chrome. I am a student and need to figure out a solution very very soon as Fall quarter start
-
I'm probably being really dumb, but I can't work out how to remove music/vids etc from my ipod but retain them in my itunes library on my PC . I haven't got room for everything on my 8gb ipod touch. I just want to put stuff on there when I want to wa
-
Help in understanding GUI's!!!
Hi everyone, I'm new to this type of forum, but I figured it can't hurt to ask for help wherever I can find it. I'm in a Java II class right now, and I'm having a hard time understanding how to build a GUI. I created the programs provided in the book
-
Certificate problem when connection to tomcat
I setup tomcat to use ssl by creating my own certificate. This works fine using the browser. But when I try this code from a test program: URL u = new URL("https://localhost:8443/"); BufferedReader in = new BufferedReader( new InputStreamReader( u.op
-
Error in Travel Request for Non Payroll Relevant Employees
While implementing Travel Management, we have employees who have their payroll areas as 01 (monthly) as well as 99 (non payroll relevant). We are implementing travel management for both types of employees so that they can create travel requests/expen