Wrt300n and wap 4400n for network in iraq

Here is what i want to do and what i have. I need to know what else i need please:
I am in iraq trying to setup a wireless network with 2 parts. I have the wrt300n that will be connected to the internet to setup up wireless internet and the wap4400n so that i can setup a local network. the internet goes up and down so often that i need the local network to chat with others. from the router to my location is about 75ft with 15ft tall concrete barriors in the way. the wap4400n will be setup at my location. the computers that i want to communicate with for both internet and chat are aprox 175ft in a triangle from my location to two locations with concrete barriors periodically placed. i have not been able to test the system yet.
Question #1: what range extenders can I use that will allow me to extend both systems.
Question #2 what do these extenders need to be connected to(power) and are these antennas able to be placed outside?
Question #3: can the wap4400n be used as one of the extenders for the router to boost the internet signal?
Question #4: what is the reccomended distance before you need to get an antenna booster. I know this varies based on situation.
Thanks in advance.
Ray from south of baghdad.....

i don't think that the WAP4400N is capable of repeating the wireless signals..it can function only as an Access Point...so the only way to use it would be to run an ethernet cable between the WRT300N and WAP4400N...
if u want more range , better set up would be
WRT300N -->> WAP54GP( AP Mode) ~~~~~~ WAP54GP ( Wireless Repeater )

Similar Messages

Event id related to the removal of the file and print sharing for networks

Hi ,
Recently print team has migrated the print server from the physical old server A to the VM server A-new .After the migration , the server A-new is retained with the name server A shutting down the old server .
But the clients are reporting that they are not be able to print because we found that due to this print team migrated the old print server to the new print server with the duplicated entries which reflected in AD. This our server team came to know once
the complaint raised by the site person to us saying that their printers are not working at all.
While checking the issue only then we found that the duplicated entries are found in the AD for the printer objects published in the AD.Print team has done the improper migration and left to server team saying that it is our responsibility to solve the issues.
And I suspect that somebody has removed the file and print for networks in the network portion of the windows.We came to know only when we try to take any share either file share or print from the particular server to file server.
After enabling that option in the network portion , everything got resolved as the duplicate entries removed from the AD and published one instance of the printers.
I need to find the event in which this action has been triggered to remove that component and from that to identify who has done that..
Any help is greatly appreciated
Thanks & Regards S.Swaminathan Live & let others live!!!

There are some print events on the Domain Controller if one of the DC "pruned" the old print objects. Unfortunately these are information events logged to Print-Service Operational channel which is not enabled by default. You might
be lucky and someone had these events enabled.
Check if the channel is enabled on all your domain controllers.
http://social.technet.microsoft.com/wiki/contents/articles/13308.troubleshooting-windows-server-2012-printing.aspx
Alan Morris formerly with Windows Printing Team

Guide or instruction about build and config NAT for network.

Hey everybody. I’m having learn CCNA CISCO, I have a problem when I build a network, a network required that: Construct and build a topo network have 4 Router, 6 Switch, 8 PC, auto set and config IP address for communication between equipment in your topo network. Give some suggest : 3->4 IP front, 1 range 4 IP route, 2 range 8 IP route, 1 range 16 IP route. Les’t raise, give method and config NAT for it network with: Static NAT, Dynamic NAT, PAT and NAT co-ordinate.
Please give some guide or instruction me about that lab, Thank very much

Hey all here is a topo (model) network I do by myself and I have cofig NAT for it. Please see, check, fix error or guide me to fix error if it have error. Thank very much.
As a subject I have propose use a IP range is 200.200.5.1/27
b/Static NAT for IP PC8 192.16.6.1 to become IP 200.200.5.1 with a Network outside.
Router3(config)#ip nat inside source static 192.168.1.2 200.200.5.1
Router3(config)#interface fa 1/0
Router3(config-if)#ip nat inside
Router3(config-if)#interface s 0/0
Router3(config-if)#ip nat outside
a/ Accept PC in LAN 192.168.5.1/24 go out internet, this IP will be nat by IP range 200.200.5.1-> 200.200.5.6 (IP 200.200.5.1 have use for Static NAT but we can reuse).
Router3(config)#access-list 1 permit 192.168.5.0 0.0.0.255
Router3(config)#ip nat pool natdong 200.200.5.1 200.200.5.6 netmask 255.255.255.248
Router3(config)#ip nat inside source list 1 pool natdong
Router3(config)#interface fa 0/0
Router3(config-if)#ip nat inside
Router3(config-if)#interface s 0/0
Router3(config-if)#ip nat outside
c/ Accept PC in 2 LAN 192.168.1.0/24 and 192.168.2.0/24 go out internet, this IP range will be NAT by IP range 200.200.5.33-> 200.200.5.48 (16 Ip address)
Router3(config)#access-list 1 permit 192.168.1.0 0.0.0.255
Router3(config)#access-list 1 permit 192.168.2.0 0.0.0.255
Router3(config)#ip nat pool natpat 200.200.5.33 200.200.5.48 netmask 255.255.255.224
Router3(config)#ip nat inside source list 1 interface serial 0/0 overload
Router3(config)#ip nat inside source list 1 pool natpat overload
Router3(config)#interface fa 0/0
Router3(config-if)#ip nat inside
Router3(config)#interface fa 1/0
Router3(config-if)#ip nat inside
Router3(config-if)#interface s 0/0
Router3(config-if)#ip nat outside
[b]Note: My ability of English is not good so please sympathize for spelling mistake[/b]

In mac OS 10.7.5 doesnt work firefox 24 and 25 too for network user. When firefox start, immediately get freezy. Firefox 22 work well.

Is there a way to fix it? Thank you

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Help! wifi constantly dropping and (looking for network)

I attempted to updated my Macbook air via MacBookAirUpdate.pkg. I was prompted (this is not supported on your system). I am having a major problem with my wifi constantly dropping and searching (looking for network) I was told this update have the fix. I’m very frustrated! help! what do I do?

Hello ronnieluv1960,
The following article provides a host of tips that can help stabilize your WiFi.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

WiFi on and looking for network, on and looking for network

My WiFi is on and then looking for network and then on again for a little while and then looking for network and so on.
The result is a lot of waiting...
Very slow connection.
Is this normal

You seem to understand it. I believe that when you tether, you have a separate allowance (I believe mostly it is 2GB) aside from your normal data balance. When you tether, it automatically uses the 3G to tether, not the wifi and the data will be subtracted from your tethering allotment. When you use data on your phone, it is subtracted from your normal data allowance (the pool not reserved for tethering) but only when using 3G. If you are on wifi on your PHONE (not tethering) it won't subtract. Hope that sort of makes sense.

Service for network file system fails to install

Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name     : File Services
state    : Changed
rank     : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name     : Services for Network File System
state    : Changed
rank     : 2
sync tech: CBS
provider : FileServerRoleProvider
name     : File Server
state    : Changed
rank     : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
          'Services for Network File System',
          'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
        TYPE               : 1 KERNEL_DRIVER
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
        TYPE               : 2 FILE_SYSTEM_DRIVER
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
        TYPE               : 1 KERNEL_DRIVER
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 31 (0x1f)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-Poopesh

Hey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name     : Services for Network File System
state    : Changed
rank     : 2
sync tech: CBS
ant.     : empty
pred.    : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
          'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one!

Perpetual Scanning For Networks

My iMac displays the wi-fi networks of some 20 neighbors and perpetually scans for networks for the entire time I'm online. I also get a window that says "None of your preferred networks are available" even though I'm online using my own network. How can I prevent the networks of all of these nightbors from showing up on the network list, stop my iMac from constantly scanning for other networks and asking me if I want to join them (remember, I'm already online!), and close this unwanted window?

Have you checked Apple Menu, System Prefrence, Network, Wi-FI?
Is Ask to join networks checked? if so, have you tried un-checking it?
also, while in wifi, have you checked your prefered networks list?
Advanced... Button, WiFi Tab. On the prefered network list, do you see any of your nabors networks and or any networks that do not need to be on the list? if so, have you deleted them?

Saposcol "not set to [Maximize Throughput for Network Application]" W2008

Hi experts, I have sent a customer message to SAP asking "saposcol
show not set to [Maximize Throughput for Network Application" in
Windows 2008. But the answer is really strange. Is he correct?
========
26.06.2009 - 09:28:37 CET - by SAP
Dear Customer,
Installation guides clearly specify that configuring this memory
management option is not required for systems in Windows 2008.
Also, if you check note 65761, you will see that the note was last
modified on 20.04.2007, and the current version of sapntchk was not
modified since then (version 5.0.0.13). This obviously means that
sapntchk checks the memory management settings of your system as if
your operating system was a Windows 2000 or 2003, as Windows 2008
still did not exist.
Taking into account both considerations, you can disregard this message
raised by sapntchk and keep calm at the same time.
Right away, I send you back this message so you can close it at your
earliest convenience.
Best Regards,
<name removed>

Hello Dennis,
Here is the way to find if the Maximize Throughput is enabled or not on windows 2008.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters\size
Your choices for this registry key are 1,2 and 3.
1 = Minimize Memory Used
2 = Balance
3 = Maximize Throughput for File Sharing and Maximize Throughput for Network Applications
Be sure to set this to (3). By default it is configured to 1.
Best Regards
Kiran Kumar

Iphone 4 with ios 5 and 6 with intermittent wifi. Sometimes I can find my networks but they don't stay and sometimes my phone cannot scan for networks

I never had a problem with ios 4. I add an issue with my last iphone 4, my fault. Apple sent me a new phone with ios 5. Worked great for a couple of weeks. Then my wifi started dropping. Not a huge deal. Picked it up again. Then it happened more frequently and the wifi dropped. Not happy. Then it stopped locating my home router completely. "Could not scan for networks". Awesome. So I updated to ios 6. WORSE. Wifi greyed out. So I found a solution (thank you) from someone on the forum to stop all running programs (home menu twice and hit x to programs on there) and shut phone off for 5 minutes. No more grey-out wifi, but scanning still didn't work. But then occasionally it did. Weird. I've tried all the 'creative' suggestions like resetting networks/ phone, router, etc. This is not a problem with just a few phones. I have seen several posts from people who are having this same problem. Some say it's software; some say hardware. I don't know what to think. Now it's back to 'could not scan for networks'. I've tried to change settings on my iphone and router. I don't know how to reset my router to factory settings (Cisco), but am working on that. Seriously though... I shouldn't have to jump through hoops here. Apple should be bending over backwards to resolve this annoying issue. Yet.. no word from Apple. No timeline for this fix. I have run the gamuet (sp?) on fixes for all kinds of wifi issues. I feel like I've had them all short of water damage (absolutely no water has touched my phone through my cage-like case). So. On Monday... I may have to take my phone in to an Apple store to see if I can get a replacement. Software/hardware/who cares. I shouldn't have to search on here for a solution. The answer SHOULD be easy and resolved. I'm thoroughly annoyed.

Verify that the user names and passwords are entered correctly.
Restoring from backup does not seem to always restore the password for email accounts.

My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do? Read more: My iphone 3g is keep searching for network, and the carrier unable to load network list

My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?

Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again!

Cant fix - "select a certificate or enter a name and password for network"

iMac 27 - inch, Mid 2010
Software OS X 10.8.2 (12C60)
I cant seem to fix this message when going online, nore have I managed to find any help with it.
everytime my imac27 2010 sleeps it goes offline then this message appears...
"select a certificate or enter a name and password for network (whatever network im trying to connect to)"
it continues with...
"no certificate selected"
"account name"
"password"
as a result I have to play around with "join other network" every time I want to join my own network.
it was so anoying that I decided to reinstall everything from scrach, so I backed everything to time machine. but I couldnt restore as im on snow leapard and dont have an original disc with me. I moved countries so the apple store isnt round the corner any more :/ (disc would need to be shipped in)
whats interesting in my mac did not have this wifi conection problem when I took it to another location. only from home. But every other devise does not have this problem even at home...
any help really appreciated

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Keeps asking for Select a certificate or enter a name and password for network

everytime i start my mac it asks for "Select a certificate or enter a name and password for network" and when i'll close it and reopen it, it still asks.
can somebody help with what am i suppose to do?

If you are currently showing WiFi status in the menu bar, you would see this icon:
If you see that near the top right corner, click it and choose "Join other network" from the drop down list.
If you do not see that icon, then go to System Preferences (under the Apple logo in the menu bar), ciick "Network", then choose "WiFi" and choose something (probably "Assist me" at the bottom) there.

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

HT1338 my mac book pro is constantly "looking for networks" while connected using my home network and other wifi systems. how can i stop it?

Why is my Mac Book constantly "looking for networks" while i am using wifi?

If it is constantly searching for networks every five seconds or so, then it is the bluetooth - wifi problem discussed on other threads. I find that system preferences > network and clicking at the bottom on the 'Show wi-fi status in menu bar' button to switch it off, and then back onto the menu bar, solves the problem. Sometimes on waking I lose wi-fi completely and have to reload, but that's infrequent.
Hopefully Apple will come up with a solution soon.

Wrt300n and wap 4400n for network in iraq

Similar Messages

Maybe you are looking for