Wrt300n "Operating Mode" missing

Hi i have a wrt300n v2 (firmware 2.00.17) being a bit of a pig
i seams to think that it is ppoe modem all the time, i have an adsl modem hooked in there but wont find an route to this
if there adsl modem is pluged in to the wan port (with nat switched on and on a diffrent subnet)and setup that way it works (with port farding prblems and other things up)
my help page said the should be a "Operating Mode" drop down in the
setup ---> advanced routing
page but no for me theres not any one got any ideas
davidk

I found my answer as to why it doesn't work. SSD and HDD write and read memory differently. Even booting the OS was different for Windows 7 hence the OS errors.

Similar Messages

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

Urg:"At operation mode" in background job scheduling

Hi Folks,
I am doing background job for a program. Pls tell me the usage of "At operation mode" in detail.....If any coding is required pls also let me the way to do....

Hi
It s nothing but the NORMAL operation Mode or NIGHT operation mode
So you can define the relative operation moade and accordingly can set the time to execute the job as per the settings.
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
<b>Reward points for useful Answers</b>
Regards
Anji

Logs for 'Operating mode' change in mirroring

Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.G

Try looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance

Unable to change the operating mode in informatica admin tool.

hi
i have installed Informatica 8.6.0
my repository service is running . and i have also created the integration service but its not running, the reason as i fount out in various blogs is that my repository is iin exclusive mode .
so , i tried to change it to normal mode . but the problem is as i select normal in the drop-down list in general properties operating mode option and click ok , nothing's happening a and the page error is coming as shown below:
Can't move focus to the control because it is invisible ,not enabled or of a type that does not accept the focus
Is this an error of internet explorer ??? i am using IE 7.or are there any options that i need to enable???
what should i do in this case???
plz help !!!!
Edited by: Nikhil.S on Jun 8, 2011 3:37 AM
Edited by: Nikhil.S on Jun 8, 2011 3:41 AM

I got the same error and after I tested with firefox and everything.. I found out the issue (in my case):
- Under Database properties, The value for "ConnectString" property contains a space at the end.
-Example "host.oracle.com "
- Solution: I remove the space at the end , save it, and Now I can modify the operatingmode to Exclusive
Edited by: hcamacho on Jun 24, 2011 1:53 PM

Operating System Missing upon Winclone 4.1

Here's what I have.
MacBook Pro 13 Late 2011
Intel Core i5
16GB DDR3 RAM
Crucial 960GB SSD SATA .1 (Winclone 4.1 for Bootcamp Windows 7)
OWC 1 TB 7200 RPM HDD SATA .2 (Mac OS X Lion 10.7.5)
Matshitsu Optical Drive Removed
Factory HD Enclosed in NetStar CX SS USB 3.0
Also have Parallels Desktop 8.
Here's what worked.
I started Parallels 8 and Bootcamp worked booted and ran fine with no issues. I shutdown and restarted for Bootcamp, got an error message "operating system missing". I'm thinking its a destination issue. But I don't know where to look.
Any ideas?

I found my answer as to why it doesn't work. SSD and HDD write and read memory differently. Even booting the OS was different for Windows 7 hence the OS errors.

Manual Switch over the operation modes

Hi,
What's is purpose of RZ03(Manual Switch Over the Operations Modes)? Where extactly useful?
Regards
Basis Admin

Hi,
Operation Modes are the best way to change the amount of processes in the system, Administrators usually prefer more dialog processes during the day to deal with the users requests and more batch processes during the night to deal with all the system jobs, reports, archiving, etc.. The manual switch is used to change the Operation mode instantly to deal with a special demand, like heavy reporting, special month end jobs, testing, etc...
Hope this help!
Juan
Please reward with points if helpful

Can't switch operation mode after backup offline

Hello:
Every sunday system stop at 9:30 a.m to backup offline at 16:00p.m
System start at 23:00 p.m.
Operation mode
Day : 7:00 a.m 22:00 p.m
Night 22:00 p.m 7:00 a.m
This monday dont switch operation mode night to day and disp+work get
busy .
Nobody could access the system until it is manually reset.
Can anybody help us?
Regards.

You have following options.
1 .try to adjust the operation mode as example given below.
Add an additional operation mode Except for the duration of backup .
Example:
7:00 a.m. - 7:00 p.m. DAY (normal operation mode)
7:00 p.m. - 7:00 a.m. NIGHT (normal operation mode)
3:00 a.m. - 4:00 a.m. EXCEPT (Backup operation mode)
4:00 a.m. - 7:00 a.m. NIGHT (exception operation mode)
2.See if you get and error message in sm21 after offline backup.
3.delete the operation mode and create new .
4.try to change the timings of day and night operation mode.
what is your OS and DB and Rel?
hope it helps.
Amit

Profile consistency check when operation mode change

If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. It's therefore necessary to adjust the configuration of the operation modes after a change to the profiles.
In above paragraph, I don't understand why the system can not switch mode if the number of wp in profile is changed? Does system will compare wp number in profile with currently running wp number before the operation mode switch? Please advise.
Thanks.
James

Yes, I can understand it, when the number of work processes is changed, we need redefine the operation mode.
But I am confused this sentence "If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. "
After the number of work processes in profile is changed, I think it will not impact instance immediately until restart the instance. According to this sentence, it seems when I change the parameter in profile, it impacts the instance immediately and the system can not switch operation mode right now if we don't restart the instance. Is it reasonable? And I think the operation mode still need redefine even if we restart the instance, since scenario in Ralph's description. Is my thought right?
Thanks so much.
James

Unvisible tables in the operating mode (MAC)

hi everyone
a customer did install the contribute cs4 for macintosh.
i know contribute only for windows.
is it possible that he doesn't see the tables in the
operating mode?
i can't overtake his screen to see it.
thanks

can you rephrase the question?
are they trying edit a page that has html tables in it, but
they don't see
the table cells in ccontribute?
url address to the page they are trying to edit?
is the html syntax in the page correct?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

NCipher server not in operational mode : Cisco NAC

One of the NAC server got rebooted and then while restart i am getting an error nCipher server not in operational mode. Please change the settings on back of the card. Also error-sshd-server not running.
Please let me know how to make the ncipher in operational mode and change the mode of NAC in FIPS mode.
It is very urgent. Please let me know the solution.
Regards,
Tarunava

The Cisco NAC is 3315 and software version is 4.1.2.
Below are the error logs.
[root@PLHO_CAS_01 ~]# cd /perfigo/common/bin/
[root@PLHO_CAS_01 bin]# ./test_fips.sh info
Installed FIPS card is nCipher
Info-FIPS file exists
NFastApp_Connect failed: ServerNotRunning
Error-card is not in operational mode
Error-httpd worker is in Non FIPS mode
Error-sshd not up
System not in FIPS mode
[root@PLHO_CAS_01 bin]#
[root@PLHO_CAS_01 ~]# /etc/init.d/sshd start
Starting sshd:WARNING: initlog is deprecated and will be removed in a future rel
ease
key_load_private_pem: RSA_blinding_on failed
Could not load host key: /root/.perfigo/sec/tomcat.key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
[FAILED]
[root@PLHO_CAS_01 ~]# /etc/init.d/httpd start
Starting httpd: Syntax error on line 167 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
[FAILED]

Error:Operation Code Missing.

Hai To All,
Iam creating reports.On tht iam using grid control if i execute the query the error triggering as "Operation Code Missing"
Does anyone have idea about this?????????
Regards,
Anitha

I suppose that this is question to be posted to SDK Forum

What are Operation Modes?

I would just like to have deeper meaning with regards to Operation Modes. What are operation modes? Does this basically means that we can allocate additional resources (in terms of work process) to a specific operation? For instance, we need additional background work processes at night, we could simply switch the operation mode that is defined to add several background work processes for night? Is that it?
Are there any subtraction or addition of work processes? For instance, from only existing 5 background processes, we can make it to 10 background processes by activating or switching the operation mode?
Or is it simply reallocation of work processes to give way to the more priority in-need work processes? If it is simply reallocation? From what work process are we reallocating from? Does it signify that we can allocate several dialog work proceses and make it background processes? From 10 dialog process and 3 background process, we'll allocate 5 from dialog process to make the background process into 8?
Or is it simply reallocation of the current setting of the work processes? For instance, you have a total of 10 background processes defined in the profile parameter, then you set 2 bacground processes for day and 8 work processes for night. Is that it?
Which is the correct notion? Kindly clarify. Thanks.

Hi,
Operations modes just change the role (from DIA to BTC for exemple) of some work processes.
It is not possible to change the total number of work processes.
If necessary, It is possible to switch manually operation modes with RZ03.
On our systems we have 3 operation modes : Day, Night and Exceptional.
Day and Night are switched automatically with the time.
Exceptional mode is switched on manually very rarely when there is an "exceptional" need...
One trick to know : you need at least one UPD our UP2 process on a DI to be able to change the number of these processes vi operation modes.
Regards,
Olivier

%OIR-SP-6-DOWNGRADE_EARL: Module 4 DFC installed is not identical to system PFC and will perform at current system operating mode

Hi Everyone,
Good day!
We have WS-SUP720-3BXL and WS-F6700-DFC3CXL installed on 7609-S router and based on this link http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/107258-C6K-PFC-DFC-CFC.html the Resultant mode should be PFC3BXL. However, as shown below, the PFC operating mode becomes PFC3B.
Router#sh platform hardware pfc mod
PFC operating mode : PFC3B
Following are the modules installed in our router.
Router#sh mod
Mod Ports Card Type                              Model              Serial No.
4    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      XXXXXXXXX
5    2 Supervisor Engine 720 (Active)         WS-SUP720-3BXL     XXXXXXXXX
6    2 Supervisor Engine 720 (Hot)            WS-SUP720-3BXL     XXXXXXXXX
Mod MAC addresses                       Hw    Fw           Sw           Status
4 001f.6ca4.2588 to 001f.6ca4.258f   2.1   12.2(18r)S1 12.2(33)SRE9 Ok
5 001f.6c77.8448 to 001f.6c77.844b   5.9   8.5(3)       12.2(33)SRE9 Ok
6 001a.a22d.b200 to 001a.a22d.b203   5.10 8.5(3)       12.2(33)SRE9 Ok
Mod Sub-Module                  Model              Serial       Hw     Status
4 Distributed Forwarding Card WS-F6700-DFC3CXL   XXXXXXXXX 1.0    Ok
5 Policy Feature Card 3       WS-F6K-PFC3BXL     XXXXXXXXX 1.11   Ok
5 MSFC3 Daughterboard         WS-SUP720          XXXXXXXXX 4.0    Ok
6 Policy Feature Card 3       WS-F6K-PFC3BXL     XXXXXXXXX 1.11   Ok
6 MSFC3 Daughterboard         WS-SUP720          XXXXXXXXX 4.1    Ok
Mod Online Diag Status
4 Pass
5 Pass
6 Pass
The problem now is that I am seeing the messages below and the maximum value that I can enter for mls cef maximum-routes is 239K only instead of 1M.
%MLSCEF-SP-4-FIB_EXCEPTION_THRESHOLD: Hardware CEF entry usage is at 95% capacity for IPv4 unicast protocol.
Based on this link, http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/117712-problemsolution-cat6500-00.html WS-SUP720-3BXL and WS-F6700-DFC3CXL has a Default IPv4 TCAM Space of 512K but I'm only getting the following.
Router#sh mls cef max
FIB TCAM maximum routes :
=======================
Current :-
IPv4 + MPLS         - 192k (default)
IPv6 + IP Multicast - 32k (default)
Please advise what seems the problem.
Thanks

Was the WS-X6708-10GE inserted some time after the router was last reloaded? Cisco's PFC/DFC FAQ states that mixing different types of PFCs and DFCs affects OIR (online insertion and removal) - i.e. the router needs to be reloaded with the line-card installed in order for that PFC/DFC combination to work as expected (or even to work at all) - and although I couldn't find PFC3BXL+DFC3CXL as an explicit example of such situation, a reload might be worth a shot if the downtime is not too much trouble...

Costum module interfaces compact rio: how do I select SPI or parallel template in operation mode

Hi,
I want to create custom module for my compact rio embedded chassis.And my question is how I can select between SPI and parallel interface in the operation mode? Do I have to write a logical low or high to a special pin to select the SPI template??
Regards,
bluemoon

For development of custom modules you need the cRIO Module Development Kit.
http://sine.ni.com/nips/cds/view/p/lang/de/nid/14548
Along with the Kit comes the documentation which includes handling of the interface.
Regards
Stephan A.
NI

Wrt300n "Operating Mode" missing

Similar Messages

Maybe you are looking for