WRT300N - Port 1 Light not working

Just wanted to know if anyone has experinced the LED port light not functioning...Details:
The Router seems to be working fine...It is just bothering me that the Port 1 light is not working....I have that port active with a Vonage Modem and the Vonage Modem is working fine.....It is just annoying me that the light is not functioning onthe WRT300N...
I noticed the previous day it WAS working.....
Hasa anyone else encountered this and If you got it to work again how do you accomplish this...

Well the LED does not light at all, or it flashes in a while? Anyways if the port is working then, why to worry about it!

Similar Messages

The Port : 6001 is not working in the system

Hi Experts,
OS : AIX 6.1
SAP : SAP Netweaver EHP1
In the OS level the Port : 6001 is not working and giving the out put as...
pb2adm> telnet abcprdpb2 6001
Trying...
telnet: connect: A remote host refused an attempted connect operation.
Virtual host : abcprdpb2
As it is the BI java stack system & I configured the SMD & wily in the system. From the BI java stack system the wily agent is not working and it uses the port : 6001.
Now the issue is regarding to the port : 6001
when telnet in the same system which is Virtual host : abcprdpb2 is not working and which I have given the output above. It is working when I telnet to the other systems. Please see the output below...
pb2adm> telnet abcprd001 6001
Trying...
Connected to abcprd001.
Escape character is '^]'.
Connection closed.
From other system virtual host : abcprd001
As I have checked with the firewall team and said it is fine in the system and same us AIX team also. But still port : 6001 issue is not resolved in the Virtual host : abcprdpb2
Can you please let me know how to open the port : 6001 in the Virtual host : abcprdpb2 and also how we can confirm that port : 6001 is opened or blocked in the Virtual host : abcprdpb2.
Thanks & Regards,
Sandeep.

Hi,
The both mentioned virtual systems are in different LPAR's (Physical host).
Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
Can you please look in to it and provide some thing which I have to look in the OS level.
Thanks & Regards,
Sandeep

Nokia N8 Breathing Light Not Working PR1.1

Many of my co-N8ers on a forum said that after updating to PR1.1 (013.016) the breathing light is not working anymore even though it is turned ON in the settings. When I tried it on my N8, I can confirm that it is not wotking!
Can anyone try and confirm this one?
Solved!
Go to Solution.

@kichIf it is the same error as my N8, then I'm afraid it's a hardware failure. The notification LED has been missing for almost a year on mine. I just finished the spring cleanup, starting with a 3-button (very) hard reset and loading the latest Belle Refresh with the Nokia Software Recovery Tool. This made no change to the LED's.
Symptoms:
* Breathing light not working
* Notification light for SMS and missed calls not working
* Charge indicator LED not working during charge - but it blinks 5 times when the shut down phone is connected to a charger
A diagnostics software list the error as: ST_LED_CONTROLLER_TEST No Minor [ 10 ]
The phone is otherwise healthy and stable so I don't worry too much about the missing LED's.
If it must develop an error while it gets older, this is not so bad...
Hans

Disable port monitoring task not working

Hi,
On SCOM 2012 SP1 the task "disable port monitoring" is not working. When I run it shows a success message but the port\interface keeps to be monitored on scom, the ports that I'm trying to disable the monitoring are members of the Relay Network
Adapters Group. Is there any way to fix this task or manually stop the monitoring of the port\interface ?

Hi Carlos,
By coincidence I ran into the same problem today.
It can be disabled by creating an override where you target the specific port object and set the parameter enabled=false.
I am not 100% sure this is the correct way but it works. I am assuming the disable port does something similar but I have to open up the task to confirm this.
For now I hope this helps.
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

OS X Mail: Troubleshooting sending and receiving email messages

Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

Hi,
I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
Message Edited by Yannis1980 on 10-13-2009 12:09 PM
Message Edited by Yannis1980 on 10-13-2009 12:09 PM

AC adapter light not working

When charging my Macbook Pro sometimes the indicator LED light doesn't come on at all. Everytime I checked when the LED isn't working the computer still charges, but I am not sure if when I leave it sometimes if it is charging correctly since the LED doesn't work periodically. I am also wondering if this is an issue with the adapter, rather then the actual computer port. If it is the computer port I don't feel comfortable with sending it out for repairs if its just a small issue. I guess what I am trying to see is if anyone else has experienced this issue. I would much rather go to the apple store and recieve a new adapter, and if the issue persists I can send it in for repairs. Please if anyone has experience with the same trouble I have had let me know. Thank you in advance.
-Andrew

May be the adapter is not working properly.
Take the MBP and MagSafe/Power Adapter to the Apple store for evaluation.
For:
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

Iphone 6 plus led light not working in 8.3

I updated to 8.3 a few days ago and have just noticed that my led light does not work.
I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Mini display port to DVI not working

The mini display port of my late 2009 27" iMac is not working with DVI. Using the same monitor, DVI cable, and mini display to DVI adapter, I can connect my Air with no problems. So the monitor, adapter, and cable are fine. I can also connect my iMac to the same monitor using a VGA cable and a mini display to VGA adapter. So the problem clearly seems to be with my iMac. Has anyone had similar problems? Any advice? I think the image quality of DVI is substantially better than VGA so I really would like to get this working. But I don't think the difference is worth carrying my 27" monster into the Apple Store. I could buy a mini display to HDMI adapter, but I would rather not buy yet another adapter (I think I have about 15 already with my various idevices) - and it might not work either. The DVI setup is simple and really should be working. I bought a monitor and also a HD TV with DVI ports specifically for this. Thanks.

Hello,
Using the VGA connector, what resolution is set on the Monitor?
Is there any input choices on the Monitor for port or source?

Mini Display port DVI adapter not working on Thunderbolt Port

For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV. I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly. The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it. Does the Thunderbolt port require a new display port to DVI adapter?

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

USB port 1 & 3 not working, BT not available

iMAC 27", Mid 2011
The USB port 1 & 3 (1 is near the firewire port) are not working, also Bluetooth is not available.
I try to reset PRAM and SMC but it didnt change the situation.
When executing Hardware Test (Diagnostics) no errors are found (short and long test). When in the hardware test, all USB ports are working.
AND afterwards when restarting Mavericks the USB port 3 works again - but when I then unplug the mouse, put it to port 4 and back to port 3 it does not work anymore. (I didn't check if the same happens with port 1).
Any suggestions how to fix it?
Thomas

Unfortunately it doesn't change anything.
Yesterday I reinstall Mavericks from scratch (erase hard disk and install OS). Now no bluetooth icon appears in the menu bar - even not in system preferences.
Some further issues I notice but I'm not sure if they are related to the bluetooth issue:
it takes about 60sec. after a reboot/restart until the apple logo appears and the progress indicator is running
I found a lot of USB error messages in the logs:$ sudo dmesg | grep USB
USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
USBF:    6.179    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    12.182    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    12.215    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa110000)
USBF:    18.188    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    24.191    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    24.222    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfa110000)
USBF:    30.195    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    36.200    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    36.231    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfa110000)
USBF:    42.205    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
It seams to me like the internal USB hub is in trouble.
Unfortunately I can not compare it to a working iMac.
ThoMo

Port Mapping is not working on Time Capsule

I have replaced my Airport Extreme with a Time Capsule for back up purposes, but the Port Mapping functionality is not working as it did on the Airport Extreme. I have my security camera DVR connected to the network and am using Dynamic DNS to resolve the WAN IP Address. HAs anybody any experienced this problem with Time Capsule?

This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File. Once that's done you may have to do a little adjustment to account for the disk drive.

Unityconnection Port Staus Monitor Not Working

Hi ,
Port status monitor is not working. unityconnection version 7.1.5.
We enabled the port status monitor & given the PC IPaddress.
Enable Remote Port Status Monitor Output
IP Addresses Allowed To Connect For Port Status Monitor Output (comma-separated)

I'm assuming you have an IP addressed filled in and it's just not on your screen shot...
What version of rPSM?
rPSM uses port 5000 to communicate with Connection (this is noted in the help but I should probably put some static text to this effect on the login form for clarity). Make sure it's not being blocked between your client and the Connection server.
Beyond that there's not much that can go wrong - it's simply getting text streaming off that port once your client has been registered (Connection wont talk to any client that doesn't have an IP that matches in the list there).
No DB or other connections are needed or are in use.

Macbook pro retina keyboard back light not working

Hey guys my macbook pro retina early 2013 backlight is not working ...i have tried increasing light intensity of backlight using f5 and f6 keys still its not glowing and i tried with app called labtrick ...still its not getting on

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

Port forwarding 3389 not working!! help!! needed urgently

i am trying to forward the RDP port to a terminal server inside my LAN. but things are not working for me. Router is 801 ISDN
my config is..
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname edi-ISDN
ip subnet-zero
ip name-server 213.x.x.20
ip name-server 195.x.x.222
isdn switch-type basic-net3
nterface Ethernet0
ip address 192.168.0.254 255.255.255.0
ip nat inside
interface BRI0
no ip address
ip nat outside
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication pap callin
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer idle-timeout 500
dialer string 4004444
dialer hold-queue 10
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password xxx
ip nat inside source list 101 interface Dialer1 overload
ip nat inside source static tcp 192.168.0.100 3389 interface Dialer1 3389
no ip http server
ip classless
ip route 0.0.x.x x.0.0.0 Dialer1
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
line con 0
password xxx
transport input none
stopbits 1
line vty 0 4
password xxx
login
no rcapi server
the ip nat translation output was
Pro Inside global Inside local Outside local Outside global
udp 86.96.x.x:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.x.x.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.x.x.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53
edi-ISDN#show ip nat trans
Pro Inside global Inside local Outside local Outside global
udp 86.96.130.249:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.96.130.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.96.130.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53

update ip nat translation shows that the connection touches the outside interface(dialer1) of the router but then it disconnects.
=====================================
Pro Inside global Inside local Outside local Outside global
tcp 86.96.131.184:80 192.168.0.100:80 --- ---
tcp 86.96.131.184:3389 192.168.0.100:3389 86.96.139.115:29083 86.96.139.115:29083
tcp 86.96.131.184:3389 192.168.0.100:3389 --- ---

WRT300N - Port 1 Light not working

Similar Messages

Maybe you are looking for