WRT300N Problems with Windows Mobile devices

Hello.
After installing the latest firmware my HP Rx3715 PDA (windows mobile 2003) is not able to connect to my wireless WRT300N network. It keeps prompting me that the WPA Key i incorrect. If I disable WPA (No encryption) it works fine.
I tried som easy wpa codes like: 12345678 but it doesnt work!
My Settings are:
Radio Band Wide 40mhz (tried also normal)
wide channel 6
standard channel 8
SSID Broadcast Enabled
PSK-Personal
Enc. TKIP
key renwal 3600

does any of the wireless computer connect to the router with the WPA security ?? and what is the algorithm that the WPA is using i.e is it TKIP or AES ??

Similar Messages

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service  Apple Mobile Device  failed to start. Verify that you have sufficent priveleges to start system services.

    I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
    Thanks bluebanana 66

    Hi bluebanana 66,
    Thanks for visiting Apple Support Communities.
    There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Best,
    Jeremy

  • 700w not recognized by Vista with windows mobile device center

    please help:
    i have a treo 700w that doesn't want to consistently connect to machine I am working on. when it works (rarely), it works fine, when it doesn't there is no explanation. I have restarted both computer and phone, and I can't seem to get a connection made. 
    Further I tried to uninstall/reinstall the windows mobile device center, i have removed the sync profiles on both my computer and phone, but nothing is seeming to work. I find it interesting that vista recognized my Smartphone USB device (it shows in the device manager), but that windows mobile device center doesn't show that anything is connected. 
    I am connecting via USB, but would be happy to connect via bluetooth, but when i try that approach, it only offers headset/wireless stereo (i'm looking for calendar/contacts/etc). 
    any direction would be wonderful - i have searched in google and subsequent pages for an hour already, and I'm thinking someone must have a better way. 
    Thanks,
    -cb
    PS - for those who are forum administrators, the registration process sucks: the password limitations are oddly strong for a simple forum like this, and when you don't put in a proper password from the get-go, it clears your prior selection of device/os/agreement registration, so when you fix the red flags (the password) and submit, it (and only then) tells you that you've forgotten to answer the questions below (that you had already answered before you were thwarted by the password reqs). sigh. 
    Post relates to: Treo 700w (Verizon)

    Hi AlanG,
    I have tried multiple USB connections, and do not have another sync cable. No luck. 
    Though, your post gave me an idea and that was to use a safety pin to scrape the contacts at the bottom of the phone. I keep the phone in my pocket most of the time, so there was some visible grime, though i would have guessed that the connection could have been made (it wasn't that grimy, just not shiny). 
    The other thing that was interesting is that when it was plugged in previous to the cleaning it shows the device connected to be a " smartphone usb sync ". Post cleaning, it now shows as a " PocketPC ". I'm not sure what the difference is, nor if I should be hoping that it reads "treo 700w", but hey, can't look a gift horse in the mouth, right? 
    So, that, in addition with removing all partnerships on both the machine and the treo (and after restarting my phone) it finally connected. 
    Wow. What a remarkable pain.  Let's hope it keeps working.
    Post relates to: Treo 700w (Verizon)

  • WRT160N Won't Connect With Windows Mobile Device

    I had another wireless router for years that connected almost instantly to my Windows Mobile 6.1 handheld device.  I switched to the WRT160N and it works great with my wireless laptops.  The device does not even show up in my available device lists on my Windows Mobile phone with wi-fi.  I tried manually connecting and it does not work.  I tried all of the other security settings, it does not work. The phone manufacturer (not the sevice provider which is Verizon) has acknowledged that they are having calls only about Cisco branded routers.  Does anyone have a solution?

    I had exactly the same problem. Tried the live technical support chat but didn't solve the problem. Resorted to random changing of settings and discovered if I changed the router setting Wireless -> Basic Wireless Settings - Network mode from 'Mixed' to 'BG-Mixed' my Windows Mobile 6.1 device found the network and happily connects with WPA2

  • Problem with apple mobile device: i've tried to activated it by going in "services" but it tells me error number 1053!

    I've also a problem with itunes and quick time: i've re-installed them about an hour ago and now i can't open them! An error screen appear with error number 7 (windows 998).
    Ah, i've windows xp.
    PLEASE HELP ME!

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

  • After reinstall to fix problems with update mobile devices still will not sync

    As many noted latest updated hosed iTunes. I followed instructions, deleting everything and re-instaling. iTunes will now play but will not sysc to iPod, Nano, iPad, or iPhone. Any suggestions?

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    Please let us know which approach works for you...
    tt2

  • MAIL PROBLEM with my Mobile devices including IPAD

    I do not know if this has been discussed or resolved. Some of my mails which I receive does not appear neither on my ipad (2), iphone 3g, iphone 4, altgough I can receive all my mails on my MAC. This has been the problem since I have bought these devices, and have been waiting since than to be resolved. I tried to use 'Sparrow App' but that does not work also. However, webmail++ app works since it reachs all of my mails directly from web server.

    I don't think I've done things like that, it's too coicidental that I restrict both iPhone and iPad, accidentally.
    by the way, how can you restrict it and how to release it.

  • Windows Mobile Device Center no longer supported?

    I have a customer that has some Motorola Windows Mobile 6.5 devices.   They were trying to get their devices connected to their PCs with Windows Mobile Device Center and were running into problems.  They contacted Microsoft Tech support and were
    told that the Windows Mobile Device Center is no longer a supported product.  Is there any truth to that?  How the Windows Mobile 6.5 OS still be supported but the Windows Mobile Device Center is not?  Their IT team will not let them install/use
    Windows Mobile Device center now.  

    I think this is what you need. you can find the Microsoft product support lifecycle in here:
    https://support.microsoft.com/lifecycle/search?sort=PN&alpha=windows+mobile+device&Filter=FilterNO
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Bluetooth device is not listed in Windows mobile device center

    Hi,
    I installed the latest Vista Bluetooth Driver on my Notebook (P100 426) and I even get a connection with my cell phone; unfortunately I'm not able to use this connection with windows mobile device center. If I click on the Bluetooth icon in the control panel I don't see the bluetooth device of my notebook.
    Any suggetions?
    Sascha

    Vista Mobile Device Center support is currently not included. It should be implemented in one of the coming versions.

  • SSO problem on Windows Mobile with WAS Java 7.0 and R/3 4.7

    We have a curious single sign-on problem with custom WM-app.
    The application is developed using WD Java and currently runs on WAS 7.0 SPS10. WAS makes calls to several RFC:s on 4.7 Enterprise and authentication is done using SSO.
    The enduser device is a handheld running Windows Mobile and the browser is a vendor (HHP) provided Mobile IE based HandHeldWeb. Because of the poor usability of the default login on handhelds we created a custom J2EE Web Application JSP which does the login to the WM-app.
    On a PC browser everything functions normally, but occasionally with the mobile device no data from R/3 is displayed. As if SSO didn't work. Sometimes, if transaction 1 doesn't work and the user comes out of it, then runs transaction 2 which makes an RFC call and then returns to transaction 1 it works. Sometimes..
    This problem does not occur on mobile device when the default login is used. And as stated previously, on a PC the custom login works fine.
    -Erno

    Hi,
    Currently SAP is selling the Software in Business Suite .
    If you are purchasing the SRM 7.0 .It will come as Business suite . It will contain
    1. SRM 7.0
    2.CRM
    3.PLM
    4.SCM
    5. ECC 6.0 wiht Eph 4
    When you are getting the ECC 6.0 in this package why to use  SAP R/3- 4.6C
    So better you upgrade both the SRM and R/3.
    I would like to know if SRM 7.0 and R/3 4.6C is compatible in first place.Will it work?
    It will work but in the long run you will get lot  of Problem.Since SRM 7.0 is Based on Webdynpro technology
    Regards
    G.Ganesh Kumar

  • Problem with "play to device" on windows media player

    Hello, I'm having a problem with the play to device feature of windows media player.  I am trying to use it to play music files to my T.V.  It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
    my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens.  No error messages or freezes either, it's as if i never clicked play.  I thought this might be a limitation with the t.v. or my network
    (im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.  Therefore, i know this is a problem with windows media
    player and not my t.v., network or computer.  This is a problem because i don't want to play all my music, just my playlist.  Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
    is not only time consuming and tedious but takes up space on my hard drive)  how do i remove this limitation or otherwise get around it?  Thanks!
    P.S.  Out of curiosity, why does this limitation exist and what causes it?

     when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.  
    Hi,
    According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
    If so,I think this method is different with "play to" feature.
    Also,we haven't found any limitation with Windows media player.
    Regards,
    Kelvin Xu
    TechNet Community Support

  • How to install the JRE that comes with JME 3.0 to a Windows Mobile device

    From Sun's JME download page:
    Integration with 3rd party emulators and Windows Mobile devices
    The new Java ME Platform SDK architecture allows integration of 3rd party emulators and devices. Java ME Platform SDK comes with Sun's Java runtime environment for Windows Mobile. A user can install this runtime on a Windows Mobile device or a Microsoft device emulator and experience all the on-device features of Java ME Platform SDK.*
    My question is, how can I install the Java runtime environment that comes with Java ME Platform SDK 3.0 to a Windows Mobile device. I am a newbie in this device programming and I'm setting up my development environment. So far, I have installed JME in my computer, and have also installed both the Windows Mobile 5 and Windows Mobile 6 emulator. I've been searching the internet for answers, but it always points me to using a third party java runtime such us Mysaifu, etc. I would like to stick with what is packaged with JME if possible.
    If anybody assist me or direct me to an online documentation on how to do this. All help is greatly appreciated :-)

    I had some success installing on a real Mobile 5 device [http://forums.sun.com/thread.jspa?threadID=5344195]
    There is a link to a doc on the main download page, item 5 under How to Install. [http://java.sun.com/javame/downloads/sdk30ea.jsp] I used this for the real device, Treo 700w. Did not try it with an emulator.
    The support looks to be an emulator rather than a JVM per say. But then again I could be wrong on that. I too had poked around looking for a JVM, CrEme, J9, etc..
    I do have a commercial app installed on the Treo that uses IBM's J9, which is seems requires a contact with a sales person to get ahold of. I had hoped to find something that might clue me in on how to "hook up" my own J2ME app with the J9 installed by the commercial package. But I've pretty much decided to get a real J2ME handset rather than continue to waste my time hacking up something with WM. Now the question is which one makes a good reference platform?

  • Windows Mobile Device Center fails to open on Windows Vista and Windows 7 machines

    Hello,
    Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
    to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
    and viruses, we have disabled Autoplay on removable devices.
    Any assistance would be greatly appreciated.
    thanks!

    Hello,
    Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
    to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
    and viruses, we have disabled Autoplay on removable devices.
    Any assistance would be greatly appreciated.
    thanks!
    I too am experiencing this issue, as well as an unrelated machine that is not on our domain that is having exactly the same problem.
    Any thoughts?

  • How to get Cumulative Update packages for SQL Server Compact v3.5 SP2 for use on a Windows Mobile device

    There are links on the pages for various Cummulative Updates for SQL Compact v3.5 SP2 which look to relate to the desktop version, but are these also available for Windows Mobile devices?  If so, what is the process to get hold of them?
    We are seeing intermittent problems with corrupted databases on devices which are using SQL Compact v3.5 SP2 and have seen that some of the Cumulative Updates do relate to corruption and would like to see if these can help to solve the issue.

    Just select the KB article, at the top of each there is a link to request a hotfix, you will then get a email with a download link. The 8088 and 8109 hotfixes also apply to Windows Mobile.
    http://erikej.blogspot.dk/2010/08/sql-server-compact-35-sp2-downloadable.html
    Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

Maybe you are looking for