WRT300N used with a WAP54G as a bridge

This may be a simple question. If I am using a WAP54G as a bridge between two WRT300N routers, have I effectively eliminated the benefits of MIMO/802.11n?

it will... not exactly eliminated but the G-standard of your wap54g will affect the 2nd wireless N-router....
if you are connecting to the wireless N-router #1, and you're using an N-adapter then you will get the N-speed and range.. but if you will connect your say laptop to the 2nd wireless router, you will most likely get only the G-standard speed and range... since by rule, different 802.11x standards which are interoperable with each other will only get it's higher denominator... meaning to say, if the B-card will connect to the G-standard router(set to mixed mode), will only get it's maximum of 11Mbps and even if the G-card will connect to the same router the B-card is connecting, it will most likely get the 11Mbps as well cuz the router will have to adjust to the B-card and act as like a B-router.
"a helping hand in a community makes the world a universe"

Similar Messages

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Most recent update to Photoshop CC and Bridge breaks use with snow leopard. need previous vsn

The most recent version of Bridge CC installed with adobe's updater killed my systems year long use of Bridge CC so it won't load. I need the previous version. I can't update to 10.7 for technical and other software workflow reasons. How can I get back to the previous vsn that did work yesterday?

I would guess you need to uninstall bridge cc and then reinstall without applying the 6.1 update
(use the uninstaller in /Applications/Adobe Bridge CC)
You can download Bridge CC direct from here
Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
And the Bridge cc 6.0.1 update from here any others you might need
(don't install the 6.1 bridge cc update, because that is the update that breaks bridge on 10.6.8)
All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
Be sure you follow the directions where it says Note: Very Important Instructions or the links won't work.

Using an Airport Express with an Airport Extreme in bridge mode

Im trying to use an Airport extreme and an Airport express to have good Wifi coverage in a house. The current Wifi is from a Verizon Westfall modem/router. I went into setup on the modem/router and disabled the wifi, then connected the Extreme to one of the 4 ports on the modem/router. I setup the Extreme in bridge mode ( because I believe I dont want 2 differnt routers handing out local IP's, right? . Anyway, it seems to work fine but I'm trying now to hook up an Express to widen my wifi area. I have cat5 ports all over the house that go back to the Exteme's location so its not a problem to connect the Extreme to the Express via ethernet cable. Im wondering if its possible to use the Express hardwired to the extreme while in Bridge mode because I cant seem to set it up properly. Can anyone out there answer that question and/or give me instructions on setting up this scenerio.
Thanks!

I will reset it like you said and then I should have the cable from the Extreme going to witch port on the express?
WAN "O" port
To set up the Express, open AirPort Utility, click on the Express and click Manual Setup
Click the Base Station tab just below the icons to assign a device name for the Express, device password, adjust Time Zone, etc. Should look like this, in general:
Click the Wireless tab next to Base Station. Adjust as follows:
Wireless Mode = Create a wireless network
Wireless Network Name = Exact same wireless network name as the AirPort Extreme
Enter check mark next to Allow to be extended
Radio Mode = Automatic or same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Exact same setting as the AirPort Extreme
Wireless Password = Same wireless password as the AirPort Extreme
Verify Password
Setting should look like this, in general:
Click the Internet icon, then click the Internet Connection tab.
Connect Using = Ethernet.
Connection Sharing = Off (Bridge Mode)
Click Update to save settings
Things will look like this:
You will see a green light in 25-30 seconds.
Be sure to restart the entire network.

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

Help for using camera raw in PSE 8/Bridge for Mac for the Canon 7D

Recently purchasing the Canon 7D, taking a few test photos in Raw, then trying to use Camera Raw in PSE8/Bridge for Mac is a problem. I cannot figure it out. Can anyone help this frustrated, novice computer user?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

How do i use wrt55ag + wap55ag as a wireless bridge?

i hope this can be done. i've been searching the forums, but don't seem to have found what i'm looking for. i have a wrt55ag v2 w/1.79 firmware. this is connected to the modem for the internet and has the network on this floor connected. i now need to add a network on another floor. there isn't a way to wire it to here. i was under the impression that a wap55ag would do the trick. however after getting it (wap55ag v2 firmware 1.1), i cannot get the two to talk to each other. the wap is using an address withing the router's range. wireless-a settings are the same on both devices. wap is set for static ip addresses. default gateway is set for the ip of the wireless router. i've tried making the ssid the same and different for the devices. still no connection between the two. since i recently purchased the wap, it can go back. so the primary thing would be making the 2nd network connect wirelessly to the wrt55ag.
any help would be appreciated.
well, you go have fun with that.

hi...if you want to use the AP as a wireless bridge it would only work with another AP...if you want it to use it in wireless repeater mode , it would work with either wrt55ag or wap55ag ..

I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together?

I'm going to update my current set up. I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together? What would be the best way to go about this upgrade?

Bridge comes with Photoshop but not with Elements.

CC installed 3 versions of Photoshop. Which one should I use? How do I get bridge to point to this version?

I use Photoshop CC (64). I have all my action scripts and hot keys set up there and everything works fine. Until I try to use bridge to run a batch in Photoshop.
When I try to run a batch operation from bridge in Photoshop using an action I made in version Photoshop CC (64). Nothing happens. Photoshop doesn't open the batch screen and bridge acts like I never tried to run the batch (keep in mind, this happens while I have bridge and Photoshop CC (64) open.
If I shut down Photoshop and then try to run the Batch operation. Bridge opens a version of Photoshop I don't use, therefore it doesn't have any of my actions scripts that I want to use. (I'm guessing it is opening CC 2014. Is this better than CC (64)? Should I just go ahead and use it instead?
Keep in mind I'm using Bridge labeled Bridge CC (64bit) so in my mind it really should be looking at Photoshop CC (64).
I tried using bridge preferences to pick CC (64) for the file type but this didn't work/help.
I don't mind using CC 2014 but I think Bridge should have an option to pick which version of Photoshop to run the batch in. This saves me time having to save out my actions and load them up in another version of Photoshop.
Anyway. Please let me know which version is the latest/best. I have Photoshop CC, Photoshop CC (64) and Photoshop CC 2014. It would be nice to be able to remove the ones I don't really need.

There are three Cloud versions of Photoshop: CS6 13.1.2, CC 14.2.1.570 and CC 2014 15.2.1. There are two two version of Adobe Bridge: CS6 5.0.2.4 and CC 6.1.0.116. Bridge CS6 works with Photoshop CS6, Bridge CC works with Photoshop CC 2014. There is no Bridge for Photoshop CC except Bridge CC with out the Bridge CC updates. The Photoshop Version are not fully compatible with prior versions of Photoshop. Subscription CS6 removed some Plug-ins support that in perpetual CS6 so some Plugin that work in perpetual CS6 don't work in Cloud CS6, Photoshop CC is quite compatible with Subscription CS6, CC 2014 had Flash Panel support removed so old extensions like mini bridge don't work in CC 2014. There are bugs in CC that are not in CS6 and there are bugs in CC 2014 that are not in CC.

Need help with PC build for use with Photoshop CS4 Extended - Have I made the right choices?

Hello,
I'm very new to the inner workings of a PC...this will be first time building one from scratch. I know enough to be dangerous but not enough to be confident. I will use the PC primarily for editing, secondarily for iTunes management. I've heard that I should have, at the very least, an SSD for PS, other apps and the O/S. I'll also have a hard drive for data storage. Do I need yet another SSD for scratch? If so, any recs for one? Also, my current build (which does not include any SSDs) is about $800. What can I skinny down, without sacrificing a huge amount of speed/performance? I am looking for major guidance here...I'm ready to order, but I keep second-guessing my choices. I want to make sure I get this right the first time around. I want this machine to last me a good long while. Any help at all will be HUGELY appreciated!
Here are my current picks:
Part list permalink: http://pcpartpicker.com/p/1bwi
Part price breakdown by merchant: http://pcpartpicker.com/p/1bwi/by_merchant
CPU: Intel Core i5-2500K 3.3GHz Quad-Core Processor ($214.99 @ SuperBiiz)
Motherboard: Gigabyte GA-P67A-D3-B3 ATX LGA1155 Motherboard ($104.99 @ Newegg)
Memory: G.Skill Ripjaws Series 16GB (4 x 4GB) DDR3-1333 Memory ($85.00 @ Newegg)
Hard Drive: Samsung Spinpoint F3 1TB 3.5" 7200RPM Internal Hard Drive ($49.99 @ Newegg)
Video Card: XFX Radeon HD 6850 1GB Video Card ($129.99 @ Newegg)
Case: Cooler Master Elite ATX Mid Tower Case ($60.00 @ Amazon)
Power Supply: Corsair 500W ATX12V Power Supply ($49.99 @ Newegg)
Optical Drive: Lite-On iHAS124-04 DVD/CD Writer ($19.99 @ SuperBiiz)
Operating System: Microsoft Windows 7 Home Premium SP1 (64-bit) ($91.98 @ Amazon)
Total: $806.92
(Prices include shipping and discounts when available.)
(Generated 2011-09-19 18:29 EDT-0400)
Thanks!
Andrea

Make sure the motherboard is the third revision as the earlier two had problems with the i5-2500K (Sandy Bridge)
I prefer Asus motherboards but doesn't mean the Gigabyte is a problem. (I note that it scored 4 eggs...)
May not make a difference in Photoshop but for Premiere the Geforce video cards with GDDR5 are preferred.
The LiteOn iHas 224 does lightscribe which is a nice touch for clients/gifts.
There is no room to save as I would consider your build minimum specs for a nice photoshop experience.
As for SSD drives...my research of reviews and articles makes me feel the technology is not ready for mission critical work. So if you are running a business then I recommend not using SSD drives. Rather look at Raptor 10,000 rpm drive for Windows and Photoshop and use the Spinpoint for storage. If not business then I've read the intel x25 SSD drives are solid but I have no personal experience with them.
Cheers,
Steve

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance

Sending photos from Lightroom to Photoshop - covered with colours? Opening from Bridge they are fine

Sending photos from Lightroom to Photoshop - covered with colours? Opening from Bridge they are fine. Does anyone know how to set up the monitor from advanced to basic? Someone said that might be the issue but I can't find any area in control panel where it has the option?

You need to supply more information and screen shots of the problem would also be useful.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

WRT300N used with a WAP54G as a bridge

Similar Messages

Maybe you are looking for