WRT300N V1.1 - Firmw v1.51.2 - Problems to get wireless connection after long idle time

Hello,
I have a WRT300N, v1.1 with latest firmware available (v1.51.2).
I've been experiencing a strange problem:
1. After long idle time (router is on, no devices are using it wirelessly), no device can get a wireless connection;
2. I have tried using different OSes (Windows XP SP2, Windows Vista, and Symbian OS);
3. Wireline connection to a FE port works (if I plug a device using the cable, I can get an IP address and navigate to the internet).
4. If power reset it (WRT300N), I can get wireless connections working again.
Is this a known issue?
Thanks, Gustavo

Well as you are able to go online from your Hardwired Computer, then i think you need to make some changes on the Wireless Part of your Router. Follow this settings on your Router, i think this might solve the problem.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 50 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

I am still having problems with wi fi connectivity after I upgraded my computer to os x 10.9.4.

I updated my laptop to 10.9.4, and now my laptop won't continually stay connected to the internet. I will get it to open a page initially, then when I try another page, the browser acts like it's going to load a page, but then just hangs there. When it does connect, it is fast, but more often then not as I'm trying to connect to different websites the page doesn't load at all. I've restarted the router, I've restarted the modem, I've deleted and re-added my network, I've restarted my computer, and I tried to restart in 'safe-mode'.
I had the same problem after the last update, but figured it was the same issue everyone else was having of the computer not reconnecting after sleep. I found a fix, and it seemed to help (although the problem never completely went away), but I can no longer find that solution.
My internet provider stated that all was good on their end, and indeed, I have no problems using wi-fi on my iphone. But, my computer just doesn't want to stay connected enough to surf various sites on the internet.
HELP!!

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
also sounds like when damaged ballasts for lamps,
ANYONE know what could be the cuasa and / or what is causing this.
greetings and thanks in advance

Hi,
Please write your TouchSmart model number, which system are you using and country of purchase.
Resource:
How Do I Find My Model Number?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

Problems with your internet connection after upgrading to iOS 7.1.2

After upgrading to iOS 7.1.2 on my iPad Retina display does not connect to the internet more. Recognizes the Wi-Fi network but can not connect to the internet. The same thing happened to my wife's iPhone 5s, while my had no problems ...

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with wi-fi connection after waking up from sleep

Hey,
I have MacBook Pro 13 (early 2011), MacOsX 10.7.2.
I've got a problem - when I wake up after sleep my internet connection doesn't work for half a minute, may be more. I do diagnostics and it says that connection is ok, but still don't work. I've tried to do something with energy saving settings, but i didn't success.
What is important: I didn't have such a problem previously. I think it appeared after one of software updates. I can even remember, there was an updated with description, saying that t fixes the problem of internet connections after Mac wakes up after sleep...
How can I solve this problem?

I have the same exact problem and it is caused by the latest ETI or whatever update it is. - the one that required restart of my computer. For me it takes multiple times to turn wifi on and off on my macbook pro before the internet starts working. Someone please help. Apparently reinstalling Mac Os X 10.7.2. should help but I'm not sure if I want to drop my mbp at apple store for 2 days yet again.

Problems with my wifi connection after iOS6 download.

After I made actualization for my iPad and iPhone to iOS6, I have problems with the wifi of my devices. When I use them in my room what is served with my access point, the connection interrupt after few minutes. The signal is there but I cant navigate or download nothing. But this not happend in the room where my main router is. Can you help me? I already made som changes at the devices, but it doesen't work !
In awaiting your help.
Regds
Bruno Meckien

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with Macbook wireless connection to Airport Extreme

I have been experiencing an issue with setting up and connecting my Macbook (new in April 08 and running OS X 10.5.5) and a new Airport Extreme purchased a few days ago. Essentially the Macbook struggles to connect wirelessly, or even to recognise the airport extreme. When connected directly using an Ethernet cable their are no problems (this is ultimately how I configured the airport extreme). The airport extreme wireless connection works faultlessly with my 3G iPhone and the Macbook seems to connect fine to other wireless networks. Anyone got any ideas / suggestions?

It sounds like we may have similar problems. I have a new MacBook Pro and I just bought a new AEBS 802.11n. It shows up intermittently on the MacBook available networks and I can only occasionally configure it using the airport utility, but then it fails to connect after that and I have to reset the AEBS and start over. Curiously, the AEBS shows up consistently on my iPhone, so I think this is a problem on the MacBook side. Unfortunately I can't configure the AEBS via the iPhone (at least I don't think I can).
Any suggestions would be greatly appreciated.
Thanks

Problem:ZEN Micro-no connection after update from v1 to v2 firmw

description:
my system: win XP, SP2; ZEN Micro firmware: version 2.2.02
i tried to update the firmware (because of the battery problem) on my pc (described above) - firmware update wasn?t possible (some flash program error). because of that i updated the Zen on my Notebook (XP, SP2).
the update worked out without any problems - i was able to restore/re-sync my songs with WMP on the notebook.
BUT: when i plugged the ZEN back on my PC - it wasn't detected anymore. from this point on i tried several driver installations, de-installed all creative software, installed it again - everything without any effect, i did read all recent post about alike issues and tried all given help-solutions -> without success.
SO what can i do now?
thx to all

joemck wrote:The new firmware doesn't require ANY Creative software to be installed on the computer. In fact, the ond Creative drivers might interfere with the player being detected.
I doubt it will interfere.
freeskier8 wrote:hi!thx for your answer BUT: i?ve now de-installed anything that has creative in it'ss name.after restarting the pc and than plugging on the ZEN - it says: new hardwear found "creative ZEN.." but then a window opens with an "assistant to search for new hardwear" - it trys to find new software...but it does not find any and the player stays non-detected.thx
The drivers are provided by Windows Media Player 0, and located in the C:\WINDOWS\INF folder. Try pointing the device there to see if it picks up on the drivers. Also have a look here in the Zen FAQ at Nomadness.net for more advice on troubleshooting MTP connections.

ALV - Maybe a NEW problem to get changed data, after input from ALV

Hi all,
I have tried to search an existing post to solve this ALV problem, with key words 'ALV' and 'refresh', but I don't find the good one... so sorry if the problem have already been solved.
<u>An example of the problem and process should be more clear than words :</u>
1) CALL ALV
CALL METHOD grid1->set_table_for_first_display
     EXPORTING
               is_layout        = gs_layout
               is_variant       = gs_variant "&see below
               i_save           = x_save     "&see below
               I_BYPASSING_BUFFER = 'X'
     CHANGING
               it_outtab        = t_zppegam[]
               it_fieldcatalog = GT_field_cat_entete[].
2) User edit values from cells from ALV.
For example, insert a new line with '+' button, and <u>fills each cells</u>.
3) The problem is that at the beginning of the PAI
there is a blank line into internal table t_zppegam,
instead of the line with the data filled into cells ALV by user
3') Internal table t_zppegam have the good data only if user clik on the button refresh of ALV, before go throw PAI.
Have any suggestions? Thank you for your help.
Best Regards,
Tony.

Hi all,
I have just solved my problem...
I have found this one into SE38 / BCALV_GRID_EDIT fifth program.
data: l_valid(1) type c.
call method grid1->check_changed_data importing e_valid = l_valid.
Tony

Problem with getting order correct after importing a cd.

Has anyone had any problems after importing a cd in to their itunes with the order of the songs not appearing correctly. Even after I double checked to make sure everything was matched up perfectly with the spelling, the tracks appear in the wrong order still. Cany anyone help me out???
Message was edited by: mikebreeze116

Try clicking on one of the column headings to sort the playlist. I'm not in front of my Mac right now, don't recall which column provided the correct sort information.
http://docs.info.apple.com/article.html?path=iTunesMac/7.3/en/560x.html

Problem with File Vault account after restoring from Time Machine Backup

my old 13" macbook 2.4 running OS X 10.5.4 was recently stolen and I've purchased a refurbished 13" macbook pro 2.66 running OS X 10.6. On booting up for the first time I restored from my Time machine backup (via setup assistant) and opted for migration of all files, applications, user profiles etc.
My main user (with admin privileges) is normally encrypted with File Vault but when I've tried to log in it's coming up with error(3) message. any ideas as to the problem and how to fix?

Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up.

Problem with getting PDF Options after installing Acrobat Pro 8.0

Hello
I have some problems after installing Acrobat Pro 8.0 on my MacBook Pro.
In the past I worked with Acrobat Pro 7.0.8. Then when I choose the printer Adobe PDF 7.0 I had always a pulldown menu in the Printer Settings. to decided what kind of PDF I want (Best Quality, PDF/1, PDF/3, Low Quality, etc)
After Intallion Acrobat Pro 8.0, I had both Adobe PDF 7.0 & 8.0 availible in the Printer Menu, but either the PDF Options is not availible for both (in some programs) or for both it is visible as "AdobePDFPDE70" but it has a line through it and I cann't select it.
Then I delete Adobe 7.0 & 8.0 from the folder "/usr/libexec/cups/backend/" and started Adobe Acrobat Pro 8.0 again. It recognised that an Adobe PDF need to be installed but again it is not availible or AdobePDFPDE70 has a line through.
I have still installed Adobe Pro 7.08 on my MacBook Pro because their is no PitStop Professional availible for Adobe Acrobat 8.0
Who can help me to make my PDF Options Availible. I also looked at the Adobe Site for a Solutions but I found only 4 Threads for Acrobat 8 in combination with OS X and it was regarding other problems.
I work with German OS X and german Versions of Acrobat and PitStop
Regards
Gerard
MacBook Pro 17" Mac OS X (10.4.8)

Hello
I solved the problem. The files "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" conflict each other.
I solved it in the following way
- quit Adobe Acrobat
- delete Adobe PDF 7.0 & 8.0 From the Printer Manager
- remove the file "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" from /Library/Printers/PPD Plugins/
- restart Adobe Acrobat Pro 8.0 and activate its self repair function from within the Help menu
- quit Acrobat and re-boot your Mac
- a Printer & "Adobe PDF 8.0" will be availible. Now the PDF Options are availible in all the Programs I working with!
I experienced that the Acrobat Pro 7.08 is very unstabil after the Installation of 8.0, let's hope that PitStop will bring very soon a new Version compatible with Acrobat 8.0

WRT300N V1.1 - Firmw v1.51.2 - Problems to get wireless connection after long idle time

Similar Messages

Maybe you are looking for