WRT300n wireless G will not connect.

Any ideas. I gad a wrt54g and had no problems. I updated to the new wrt300n and my laptops will not connect.

Follow this setting on N standard router ......
Open routers set up page .....
Click wireless .......
1) Radio Band - 40Mhz
2) Wide Channel - 6
3) Standard Channel - 9

Similar Messages

My wireless keyboard will not connect to the Mac mini. I am unable to login to change settings. How can I bypass login?

my Mac mini is password protected and my wireless keyboard will not connect.

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

PC shows network in wireless but will not connect

I have an open connection and my mac works fine but the pc will not connect...what exactly do I need to do in order to get the pc to work?

Hello Dan Miller...Welcome to the Apple Discussions!
How are you connecting your AirPort Express Base Station (AX)? That is are you connecting it as a "wireless client" to an existing wireless network or as a stand-alone Internet router? That is, if it's an Internet router, you would be using it for both Internet access and for streaming iTunes.

WRT54G ver.6 wireless router will not connect either way

WRT5G ver.6 Router will not connect to the internet or other PCs wired nor wirelessly, PC shows "limited or No Connection". The orange light is not on and will not come on when I press the Cisco System Light/Button on front. I cannot access the router through the browser nor PING it through the command prompt. I have tried to reset it and unplug it for few seconds, please, me OBIWAN, your my only hope.

I think your router is bricked, You can try the steps on this link and check if it solves your problem or not.

Wireless Printer Will Not Connect To Any Machine

Okay so just want to start out saying any help is appreciated, haven't used a forum before so hoping for any answers.
I have a HP Photosmart 5510 All in One B111a printer
Trying to connect to 2 laptops 1 Win7 64 bit - 1 Windows XP Professional SP2
I have had the printer for around a month - Set it up on my Win7 laptop no problem, needed to connect to the Win XP laptop, and after turning it on it will not connect to either randomly
It seems so far that the printer is connected to the network according to what it says, and both laptops install the software okay but when searching for the printer neither can find it, it then resorts to searching via IP where it still cannot find it.
So far I have attempted to reset defaults on printer, reset network defaults on printer, change the IP address, update the IP address, reinstall the software, reinstall the driver, install the full feature installation package, the network diag tool, it cannot seem to find the printer at all even though on the printer screen it states it's connected to the network fine.
It works fine through a cable and at one point i made a WPS connection via my Win7 laptop but couldn't really figure out what to do next and if it would help my situation so disconnected.
I don't know whether this is down to some stupid mistake I've made/something basic I've missed (it's my first printer) or an actual problem
Please help!

What router?
Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro L7780 All-in-One Printer & Verizon D-Link wireless router. will not connect

I have a HP Officejet Pro L7780 All-in-one and not able to get it to connect to my Wireless Verizon D-Link Router.
Please advise.
aileensnider

Let's start here.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless AP will not connect and Radios stay down

Hi,
I have recently configured a Wireless AP for our network. It is running flash:/c1140-k9w7-mx.124-21a.JA1/c1140-k9w7-mx.124-21a.JA1" .
I have configured the SSID's VLANS, subinterfaces BVI's etc. I have connected it to our switch infrastructure but i cannot seem to connect to it and the Radio interface is staying down.
Wireless AP Config:
dot11 ssid IMC-Wireless-Data
   vlan 10
   authentication open
   authentication network-eap AUTHVPN
dot11 ssid IMC-Wireless-Voice
   vlan 14
   authentication open
   authentication network-eap AUTHVPN
interface Dot11Radio0
no ip address
no ip route-cache
shutdown
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
antenna gain 0
no dfs band block
channel dfs
station-role root
interface Dot11Radio1.10
encapsulation dot1Q 10 native
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface Dot11Radio1.14
encapsulation dot1Q 14
no ip route-cache
bridge-group 14
bridge-group 14 subscriber-loop-control
bridge-group 14 block-unknown-source
no bridge-group 14 source-learning
no bridge-group 14 unicast-flooding
bridge-group 14 spanning-disabled
interface GigabitEthernet0
description IMC-Wireless-Data
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
interface GigabitEthernet0.10
description IMC-Wireless-Data
encapsulation dot1Q 10 native
no ip route-cache
bridge-group 10
no bridge-group 10 source-learning
bridge-group 10 spanning-disabled
interface GigabitEthernet0.14
description IMC-Wireless-Voice
encapsulation dot1Q 14
no ip route-cache
bridge-group 14
no bridge-group 14 source-learning
bridge-group 14 spanning-disabled
interface BVI1
description IMC-Wireless-Data
no ip address
no ip route-cache
interface BVI10
description IMC-Wireless-Data
ip address 10.10.0.245 255.255.255.0
no ip route-cache
interface BVI14
description IMC-Wireless-Voice
ip address 10.10.14.251 255.255.255.0
no ip route-cache
ip default-gateway 10.10.0.254
SwitchPort Config:
================
interface GigabitEthernet0/2
description IMC-SYD-AP01
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,14
switchport mode trunk
mls qos trust dscp
no mdix auto
spanning-tree portfast
Core Switch Vlan configuration:
interface Vlan10
description IMC-Switch1 - Data VLAN
ip address 10.10.0.252 255.255.255.0
standby 10 ip 10.10.0.254
standby 10 priority 110
standby 10 preempt
end
interface Vlan14
description IMC-Wireless-Voice
ip address 10.10.14.252 255.255.255.0
standby 14 ip 10.10.14.254
standby 14 priority 110
standby 14 preempt
The Logs in the AP come up as :
000022: *Mar 1 11:15:05.211 AEDT: %DOT11-4-NO_SSID_VLAN: No SSID with VLAN configured. Dot11Radio1 not started.
000023: *Mar 1 11:15:05.212 AEDT: %DOT11-4-NO_SSID_VLAN: No SSID with VLAN configured. Dot11Radio1 not started.
If anyone has any idea why this is an issue it would be greatly appreciated.
Thanks

Hi,
Pleas do the below changes..
en
conf t
int dot11 1
ssid IMC-Wireless-Data
ssid IMC-Wireless-Voice
no shut
end
en
conf t
int dot11 1.10
encap dot1q native 10
bridge-group 1
end
en
conf t
int gig 0.10
encap dot1q native 10
bridge-group 1
end
On the Switch
===========
interface GigabitEthernet0/2
description IMC-SYD-AP01
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,14
switchport trunk native vlan 10
switchport mode trunk
mls qos trust dscp
no mdix auto
spanning-tree portfast
lemme know if this helps and please dont forget to rate the usefull posts!!
Regards
Surendra

Since June 3, 2013 MiFi 4g Verizon wireless internet will not connect to my Face Book

I am using the MiFi 4G Verizon wireless internet connection. Since Monday, June 3, 2013, the only internet site I cannot get into now is my Face Book. If I do finally get in anything I click on is dead or just sits there and spins. I thought I had been hacked but after 3 days of trying I finally was able to get into my FB account settings and changed my password. So I know I wasn't hacked. It takes try after try to get into the FB, but generally nothing is clickable. After having it so many years why all of a sudden is this happening and to only this site on my wireless connection? My Daughter has cable internet connection and she is having not one problem. Her FB loads right up. Then I hear on the tv all this stuff about the gov spying on Verizon customers. Not just phones but they say FB too. I pay for my internet connection and should be able to get all sites. Is anyone else having this problem all of a sudden?

Hi. I had replied to muttandjeff on his question internet issues as I was having the same problem and all pc's and laptops in my house and my husband's FB account too. Anyway, after about 5 days of this I had tried once again one evening to get into FB and it went right in! I thought wow. So I came back here to muttandjeff's posts to find that he had ;posted abount an hour before I got there that all of a sudden he could get into FB. And that was about the same time for me too. So I posted to him that we could now too all of a sudden. Anyway, as long as I have had my MiFi and my FB account, this is the first time this has ever happened and I do appreciate that you all keep up with what is going on in this forum and that the problem has been resolved. Thank you! Also, on my question before I logged out it said question not answered and beside it then was an insert to mark as question now assumed answered. I clicked on that. Thanks again!!!!

Wireless network will not connect after Security update 2006 06

Downloaded recent security update. Ran Disc Utility before and after. Unable to connect to my wireless network (Netgear ) which always works without a problem. After trying to connect using Internet Connection Utility I tried Key Chain First Aid and also reset the key chain. No help. Finally trashed the update packages and had to log off before it connected. Any one run into this problem and a fix? Thanks.
Guy
Mac Mini Mac OS X (10.3.9)

I had the same thing happen to me! Except with a different security update..? No fixes? what's going on? How do I "trash" the update packages?

I have downloaded the os x10.9.2 and now my wireless printer will not connect even after doing all the things my brother printer said to do???

any suggestions on where I may find info on update problems?
suggestions on how to make my computer and printer begin talking to each other again....

Rosemary ...
Try resetting the print system > OS X Mavericks: Reset the printing system

My hp c4599 printer will not connect to my wireless network

My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technical

Hi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Brand New C309g will not connect wirelessly with ANY wireless security options enabled

Printer will connect via wired ethernet. I can use the http utility.
Printer will connect via unsecured wireless connection.
Printer defaults to autoconfig (169.xxx)when connected via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
Printer is in the same uncluttered room as the router.
ALL OTHER wireless network devices work fine and keep up with security changes.
I have legacy devices on the network that make me want to run with WEP.
I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
Router is D-Link DIR-655.
I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
-mooi
This question was solved.
View Solution.

Ooops, my mistake. Thanks for pointing it out.
Another idea is to make sure the firmware is updated on the router.
Also, from the control panel of the printer: Setup > Network > Wireless Network Test. It will self-test the printer radio.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New iphone 5s will not connect wireless to itunes

I recently upgraded from 4s to 5s on 2 units. The 4s would sync wireless to airport but both new 5s will not. Neither my phone or my wife's phones will connect wireless but will when connected. I have checked 'Sync with this iPhone over Wi-Fi' under Summary when connected by cable and other system settings on the phones seem to be in order. I have searched Apple site and believe all necessary steps have been taken.

I thought I should say something since I had the same problem with iTunes 11.1.3 connecting my iOS devices. iPhone 4, 5, iPad 4th gen, all on latest iOS7. My setup is on macpro 3.1. I tried updating OS, from OSX Lion, ML and Mavericks. Obviously, updating OS did not solve the issue. iTunes was the latest and greatest at 11.1.3 on all of them. I also had the annoying TRUST message pop up constantly, while it could connect to iPhoto, but no iTunes, for backup and syncing.
Long story short, found out on various forums people were having success syncing their iOS devices again on previous versions of iTunes. In my case, 11.1. Going back to 10.7, it will not support iOS 7. For this, you need to delete iTunes 11.1.3.
I found this helpful, but beware it involves Terminal.
http://osxdaily.com/2012/02/06/delete-itunes-mac-os-x/
Then, through good ol' google, I could fine a previous version of iTunes 11.1.
Installed it, connected my iPhone 5, and voilà, iPhone detected as before, and ready to backup and sync.
Spent many days researching this, it may not resolve the issue for everyone, but I hope it can help some folks running into a similar issue.

Officejet Pro 8100 will not connect wirelessly to my main PC

Was able to connect the printer to the wireless network and will print for a wireless laptop but am not able to select this printer by my main PC. When asking it to add a new printer it finds the 8100 but freezes at that point and will not connect. I have reloaded the driver software but the software also freezes when trying to locate the printer.

Hello wsw1,
Welcome to the HP Forums! I understand the software keeps freezing when "Locating the Printer".
What is your operating system on this computer? Windows or Mac?
Try installing this software over a USB connection. Please follow this HP document on Installing Printers Software over a USB Connection. Choose your correct operating system.
This will be a test, to verify if the software is able to successfully install without freezing. (Make sure you leave the USB cord out of the computer until it prompts you to connect.)
If you get this software installed on your computer, then try Convert from a USB connected printer to wireless.
Looking forward to hearing from you.
I worked on behalf of HP.

WRT300n wireless G will not connect.

Similar Messages

Maybe you are looking for