WRT310N Active - Cable Modem Link light off. WRT310N of - Cable Modem Link Light On.

Been having intermittent disconnects with new WRT310N router (using old and new firmware). When I lose connection, the cable modem (Moto SBV5120) link light is off. If I remove power from the router, the cable modem link light comes on immediately. As soon as I apply power to the router, the modem link light goes off.
It appears that settings/something faulty with the router is crapping out the cable modem's connection.
Thoughts??

Connect the computer to the Modem & see if the Internet Light works fine or not ....
Because if modem does not show proper lights after connecting to wireless router ....you need to check the settings on the Modem itself ....

Similar Messages

IPv6 is active now WAN Coax light off

IPv6 active? WAN Coax light off
‎08-09-2013 02:17 PM
It seems that Verizon has activated IPv6 in Garland Texas. It appears to be enabled in my router settings and on my PC using ipconfig.
But as I was trying things out I noticed my WAN Coax light on my router is off but everything is working normally. Connection speed is good and no problem accessing the Internet. Is this a problem?
I recently added another MI424wr to a coax in another room but it's configured as a bridge, not a router. And I'm sure the Wan Coax light was on earlier.
I also looks like Verizon sent an update to the router sometime last night.

Curious if its really active.
Could you do a test with one of the IPV6 test sites e.g.
http://test-ipv6.com/
Its been active on my local intranet for awhile but except if i use a tunnel its not been active for internet access.

My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?

My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?

Reset the SMC and then test: http://support.apple.com/kb/HT3964
Otherwise as the other folks indicated, its time for diagnostics / service. Make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.

Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit). When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number. This model doesn't show one. Any thoughts?
Thanks!

Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

Infinity: DSL light off

We had Infinity activated last Thursday (21/10/10). It worked well with a good speed (approx 30Mb/s sync).
However this morning it is not working. The DSL light on the Openreach modem is now off. The connections seem ok and there are no problems reported for the exchange on the service status website.
Obviously a call to the technical support is necessary though after their complete inability to sort out problems we had last year with our old ADSL I am not looking forward to this! Before I phone is there anything I should do such as power cycling the modem. I've not done so yet as the engineer who fitted it told me it had to be left on for the first two weeks for the line to stabilise. I guess this is irrelevant now!
Thanks very much to anyone who can offer advice!
Mark

Now into 3rd day of no Infinity broadband.
DSL light on modem has come back on. So hopefully repair of the fault is in progress. However the BB light on the HomeHub is still orange. Resetting doesn't help. So still no internet.
At least it's only 8 hours until the 48 hours are up since the fault was passed onto Wholesale so there should be a phonecall to update. I'll have a moan if there's no call!

Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

Hi, Alan -
How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
You can, but you'll need to expand your cabling a bit.
You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

Active/Standby Failover with pair of 5510s and redundant L2 links

Hi
I just got two ASA5510-SEC-BUN-K9 and I'm wondering is it possible to implement an Active/Standby Failover configuration (Routed mode) with two ASA5510 and redundant pair of switches from both inside and outside interfaces? In other words, I would like to have two L2 links from each ASA (in pair od ASAa) to each L2 switch (in pair of redundant L2 Switches). The configuration I would like to achive is just like one in Cisco Security Appliance Command Line Configuration Guide, page B-23, figure B-8, with only difference that I wouldn't go with multiple security contexts (I want Active/Standby failover).
Thanks in advance
Zoran Milenkovic

Hello Zoran,
Absolutely. You can have 2 ASAs configured in Active/Standby mode. For reference, here is a link which has a network connectivity diagram based on PIX, however, connectivity would still be same with ASAs-
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html#wp1053462
The difference is that on ASA, you can only have LAN-Based failover, hence you'll need to use one additional interface on both ASAs for failover-link. You can connect these two failover-link interfaces directly using a cross cable.
Apart from this, please refer to following link on how to go with configuration of Lan-based Active/Standby failover-
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1064158
Also make sure that both ASAs have required hardware/software/license based on following link-
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1047269
Hope this helps.
Regards,
Vibhor.

Link is down. No cable detected

I have the Linksys Wireless-G Broadband Router with SRX200 (WRT54GX2) and can connect to the internet [and to the router] using a wireless connection. However, when I can connect an ethernet cable to the router it is not detected. I get the following message "Link is down. No cable detected"

You should check if your card is enabled, try to use other cables also, try other computers on the same port and see if you at least have a light lit on it.. isolation is the key, coz you need to know where the problem is, it can either be the ethernet card, the cable or the port on the router that is derfective.. ayt?!
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Hello, I just activated another iphone4 on my account and it is now linked to my other iphone. If I delete a contact on one it deletes it on the other. Does anyone know how to fix this?

Hello, I just activated another iphone4 on my account and it is now linked to my other iphone. If I delete a contact on one it deletes it on the other. Does anyone know how to fix?

One of the phones can keep the current account; on the one that will be moving go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up a new iCloud account on this phone using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting the original phone's contacts from the new phone's account, and vice versa). These changes will be reflected on each phone.

After 15 mins with no activity my airport express turns off how can I make it permanent

After about 15 mins with no activity my airport express turns off. How can I make it stay on permanently ?

Not sure what you mean by "turns off". Are you saying that the light on the Express goes out after 15 minutes?
Assuming that it is functioning correctly, the AirPort Express is "always on". It has no type of "sleep" setting.
If the power light on the Express remains on, you have some other device on the network that is going into a standby mode or sleep mode. Check the Preference settings on other devices on the network.

How to turn the elements auto analyzer and dynamic link manager off?

While I was installign the trial version of photoshop cc, a question popped up asking me to turn elements auto analyzer and dynamic link manager off, but I couldn't find them. Please help me

Terminate the processes in Task Manager/ Activity Monitor.
Mylenium

Light off

How can I turn the light off when its charging

Hi and Welcome to the Forums!
It would be helpful to know which model BB you are asking about...plus there are forums here dedicated to most all models...if your model is listed, I'd suggest posting there so that those experts who watch that forum can most quickly find your inquiry and assist you. If your model isn't listed, there is also an "Other" forum for unlisted models.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

How do I turn off my built in camera (green light)? It's always on.

How do I turn off my built in camera (green light)? It's always on.

That's my next move. Just read about other people having the same issue & turning it off (not re-starting) & waiting a few minutes before turning it back on has worked for some & not for others...
Wish me luck.

TP-Link TD-W8961ND Wireless-N ADSL2+ Modem Router ...

has or are anyone using this TP-Link TD-W8961ND Wireless-N ADSL2+ Modem Router - Version 2 instead of the bt home hub 3? i need some help because all i get is dropouts after i have set the settings up in the device i use the defualt settings advised in the set up instructions tp link give, ive been told my line adsl may be to slow for this kind of adsl router. so have for now gone back to the hhub 3 here are the results from the nhub3 today. can someone explain this to me G.992.1 Annex A
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
8.7 dB / 24.0 dB
Line attenuation (Down/Up):
48.3 dB / 29.5 dB
Output power (Down/Up):
19.3 dBm / 12.2 dBm
FEC Events (Down/Up):
585803 / 1
CRC Events (Down/Up):
347 / 3
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1822 / 0
Error Seconds (Local/Remote):
196 / 4

The connection speed is missing from those hub3 figures.
G992.1 is ADSL max, up to 8Mb, which is compatible with all routers. Perhaps you have the settings wrong on the TP link one.
There is some information on this page, which should also apply to the 8961ND.
Using the TP-Link TD-W8960N instead of the BT home hub
You can ignore the DNS settings and leave them at default, if you do not want to use OpenDNS.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

No music via optic cable if tv if off

I have the AppleTV2 linked with HDMI to the TV and optic cable to the amplifier.
I must swich the TV on for the sound to go through to the amplifier. Then, I can switch the TV (all I want is music).
This is stupid, because gaving an iDevice with an AppleTV2 should be enough to control music to the amplifier without switchig the TV on.
Please help

Have you tried this?
1. Unplug your Apple TV, Optical Cable and HDMI Cable
2. Plug in your Optical Cable
3. Plug in your Apple TV
4. Let the Apple TV initialize
5. Plug in your HDMI

WRT310N Active - Cable Modem Link light off. WRT310N of - Cable Modem Link Light On.

Similar Messages

Maybe you are looking for