WRT310N as wireless adapter with XBOX and PC attached/ WRT600N as router???

I have the WRT600N dual band router installed on the main floor of the house. I just bought a WRT310N yesterday with hopes of attaching it as an adapter for my son's XBOX 360 and wife's PC in the basement. The two basement devices would attach to the WRT310N and then I could pick up the WRT600N signal for Interent and network access.
It seems that so far I was wrong. I cannot figure out how to get the WRT310N to work in this fashion.
Before I return it, I wanted to check and see if anybody had any thoughts on this. I would then need to buy a single gaming adapter for the XBOX 360 and a separate adapter for the PC. I was trying to kill two birds with one stone.
By the way, I could switch the WRT600N and the WRT310N if the former has the ability to do so.
Thank you all.
Sal

You can purchase WET200 as it will communicate wireless to your router and will act like a switch also as it has 5 ethernet ports to connect 5 different devices using cables...

Similar Messages

Wrt54GS router and Wrt54GS wireless adapter on Xbox 360

Totally new in the wireless router business, I bought the Wrt54GS router and the Wrt54GS adapter to connect my Xbox 360.
I installed the router with the cd and connected my pc on the router with a fixed ethernet cable.
So far everything working fine.
Then connected the wireless adapter on the Xbox 360, but it seems like the Xbox 360 doesn't recognise the Wrt54GS adapter.
What did i do wrong?
Sebastian

Do you have wireless PC's ? are they able to go online ?
enable network security and also change the beacon to 50 and the RTS and fragmentation threshold by 40 each under the advanced wireless settings.

Wireless slow with Xbox 360 Madcatz adapter

I have just had Infinity installed yesterday and all is fine with my laptop and speeds, however, my sons Xbox 360 is connected via a Madcatz wireless adapter and he is experiecing lag since the conversion.
I connected the router as soon as it arrived through the post and the connection was ok then, but since the engineer converted the line to Infinity, it has now gone slow.
Anyone got any suggestions?

I had the same problem the other day. Xbox360 will not pass the security for WPA....I called the Linksys help desk and the guy was great...I had to change my settings for the router to be WEP with a passcode and then the Xbox360 wireless adapter would work.....When you set-up the router I'm sure you were like me and put the hightest security, which does not allow xbox360 wireless to pass through...Change to WEP with a passcode....Then it worked like a charm...

Help using powerbook as wireless adapter for Xbox 360

Ok I need help partially opening my NAT. I have a Linksys WRT54G. And I play on Xbox Live a lot. The other day I moved the xbox into my living room where our new tv is and then I hooked my G4 Powerbook up to the xbox and did internet sharing because I have no internet connection in there besides wireless. Whenever I use a wired connection on the xbox is says my NAT is open. But whenever I use my laptop it says my NAT is Moderate, and it makes it hard to get into any games. I don't want to chip out the money for a $100 microsoft adapter because I will rarely play xbox in their. So how do I go about opening up the NAT the rest of the way.
http://www.ofzenandcomputing.com/zanswers/61 there is how I did it, but I setup the xbox with a static IP
On my router I have ports 88 and 3074 open which make the NAT open on wired connection. So I am thinking I may need to open those ports on the laptop itself? I am not sure if I can open ports on the laptop for outgoing connections.
Thanks for the help!

A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

Can I use a USB wireless adapter with my iMac G4 Flat Panel (it has no Airport card).

I have just salvaged an iMac G4 15-inch Flat Panel from the skip and now have it running Mac OS X Tiger 10,4. It has a 700mhz cpu, 80Gb hard drive and 512mb of Ram. No airport card is fitted so I was wondering if a USB wireless adapter could be used instead. I have a Belkin F5D8055ea USB wireless adapter fitted and the system recognises the device, this is as far as I have got as I am a complete novice on Apple/Mac machines. Anyone any ideas please?

If the device is recognised, see if you can located your wi-fi network using Airport Utility.

Need Wireless adapter with Bluetooth for Dv7-4287cl

I have a DV7-4287cl and it did not come with Bluetooth on the network card. the built in Card is the Broadcom 4313, HP part number 593836-001. I cannot find any reference to a option to swap this card out for one with Bluetooth. I spent over an hour on the phone today with HP and they offered no help.
The product number of the Dv7 4287cl is: XZ031UA#ABA I don't know if the serial number is needed or not, so please let me know if this is important. I really need to get this resolved as an external USB BT adapter is not acceptable.
Thanks.

Hi,
I suspect that you may need the below part. The part number should be 537921-001 Bluetooth SB module. HP Partsufer didn't list the bluetooth part for your DV7 but did show it for my DV7-4100t. It 's a fairly complex installation process. You might want to get a quote from a professional that has access to the HP Partner Services Library.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

Hello ebulloc,
It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Flashing amber
Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
This article should lead you to a resolution:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Thank you for using Apple Support Communities.
Take care,
Sterling

I cleaned my wireless keyboard with windex and now it won't work

i cleaned my wireless keyboard with a windex wipe and now it won't work - any ideas?

To clean the keys these work very well....

Wireless sync with Z10 and Outlook?

For my iPhone 5 i am using CodeTwoSync for Outlook and the original Apple addon for the Windows Control Panel.
For my Android phone (Nexus 4) I am using gSyncIt with Google.
How can I achieve wireless sync of calendar and contacts with the Z10 ?

Are you syncing to a desktop version of Outlook?
Here is one method that is working for many:
How to set up Outlook to wirelessly synchronize your contacts and calendar with a BlackBerry Z10 sma...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WorkFlow get triggered even if we set trigger for item update with SPEmailEventReceiver and workflow attached to same Library

Hi All,
I have a situation, SPEmailEventReceiver and WorkFlow is attached to same library, WorkFlow is configured to run after item is updated, but soon as the email is received in library the workflow
is getting triggered, We have a action to create folder with subject and date and put the attachment with the date folder in SPEmailEventReceiver e.g: once a mail is received in library the SPEmailEventReceiver will create a folder with Subject and then Folder
with Date and then put the attachment in the date folder so hierarchy will be subject folder/Date folder/attachment
I have tried to alter the SquenceNumber attribute in Feature Element file to 1 and make the Synchronization as synchronous but no luck.

Hi,
Here are some articles for your reference:
Programmatically creating Folders within SharePoint List
http://www.mindfiresolutions.com/Programmatically-creating-Folders-within-SharePoint-List-487.php
How to use SPEmailEventReceiver?
http://kkryczka.wordpress.com/2010/11/05/how-to-use-spemaileventreceiver/
Attachments disappear with custom email event handler
http://blogs.msdn.com/b/malag/archive/2009/05/13/attachments-disappear-with-custom-email-event-handler.aspx?PageIndex=2
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

AirPort Express as a Wireless Adapter For Xbox 360 and to stream PC audio?

Ok, so I am wondering if I can do this config with an AirPort express. I want to connect the AirPort to my existing WiFi, and be able to plug in an Ethernet cable connected to an Xbox 360 to get Xbox Live, as well as stream audio from my PC. Is this possible to do at once? Also, is it possible to stream PC audio, not just iTunes music? Thanks for your time.

Hello podalex,
Just an FYI for you with regard to the Airport Express:
It is always best to check with the software manufacturer FIRST. They will tell you if they have tested the product and the version, as well as whether or not it will work with Windows 7.
Check out the Windows 7 Compatibility site: (There you will find out about hardware and software compatibility.)
http://www.microsoft.com/windows/compatibility/en-us/default.aspx
There is a pulldown from which you can choose "hardware" and "software".
There are also some great articles, instructional videos and such to help with your Windows 7 at our Springboard site:
http://technet.microsoft.com/en-us/windows/default.aspx
In any event a lot of the times, Vista drivers will work in lieu of Windows 7 drivers, however, it's not 100%!
As stated previously, it's best to have the Windows 7 certified drivers installed.
Microsoft does have an official Windows 7 Support Forum located here http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/ . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assitance and support.
John M
Microsoft Windows Client Team

Wireless internet with mac and windows

hi,
I have a ibookG4 version 10.4.8 and i have a Windows XP computer with AT&T/AOL.
I am trying to install wireless internet on my IbookG4. I purchase an AirPort Express Base Station (Model # A1084)and try to connect it to my G4 but it did not work.
Is there something else I need to purchase?
I appreciate any help/assistance.

You may just need to turn on the AirPort card that is already in the iBook.
The following Apple Knowledge Base article may help you get it up and going:
http://docs.info.apple.com/article.html?artnum=106424
Please let us know how things go, and keep in mind that, with AppleCare, you can call any time for free assistance.
Good luck, and let us know how things go.

Using DB Adapter with XMLDB and CLOB

Hi,
with oracle xmldb i can store XMLs in lob or structured storage (s. Oracle® XML DB Developer's Guide 10g Release 2 (10.2) B14259-02).
Now my question:
If want to use a database adapter in the ESB to wake up several BPELs. Is there a functionality how i can transform such a clob into a XML where i can use XSLTs?
The db adapter does only map each column to one xml-tag...
If i try to use a table with xmltype the creation of a database adapter fails with:
"some tables contain columns that are not recognized by the database adapter, so they will captured as strings:
sys_nc_rowinfo$(sys.xmltype)
change teh type of the above columns to that of the closest supported type...."
Message was edited by:
HEWizard

Hi,
To get it working you have to create an AQ-table with payload type xmltype. The xmltype payload data type is available on rdbms 10g and up. If you are on 9i or lower use raw data type. Create a queue inside the AQ-table. I'm not quite sure what's the best scenario for you to the queue with data, but I would imagine that you could create a database trigger on the table you're talking about and enqueue the xml-data (payload) to the AQ-table. Thus using the AQ-table as a staging table for the ESB system.
Next, create an ESB system using an AQAdapter to dequeue the queue (like you did using a DBAdapter). The adapter can handle both single-user and multi-consumer queue's and all data types (raw, xmltype and object types).
Messages are dequeued generally within a second after you commited the transaction.
Kind regards,
H

WRT310N as wireless adapter with XBOX and PC attached/ WRT600N as router???

Similar Messages

Maybe you are looking for