WRT310N Completely stopped working.

Hi,
I have a WRT 310N Cisco router and it has completely stopped working. I cannot connect via Ethernet or Wireless with it, I bought this router a little over a year ago and it hasnt worked in about 5 months. I recently went out to buy another router and it is starting to act up. Just my luck with routers I guess, but so far the WRT 310N had the BEST signal and the best speeds then any router I have used and would really appreciate anyone who helps me get this working.
I have tried resetting the router for 30 seconds to 1 minute and no luck. Besides doing that I have no other idea on what I could possibly do since i cannot connect to 192.168.1.1 or 192.168.0.1 as my computers ( i have tired 3 computers and 1 laptop) and nothing can connect. At this point I do believe it is hardware but I'm praying its not as I think it is out of warrenty at this point.
Does anyone have any suggestions I'll try anything and everything to get this to work.

Disconnect all the cables from Linksys router.
Connect a computer to the Ethernet port 1 on Linksys router. Connect the power cable to the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router.
Now check the IP address on your computer.
If you are getting a valid IP address like 192.168.1.xxx then try to ping the IP address of the router 192.168.1.1 . If you get replies from the router IP address then try to access the setup page of the router.
If you are getting auto configuration IP address then assign a static IP address to the computer and then try to access the setup page of the router.
What IP address do you get when you connect the computer to the router?

Similar Messages

When i use my infocus portable projector, the trackpad on my mid 2013 macbook air completely stops working.

i have the new 2013 macbook air and like i stated above, the trackpad on the macbook completely stops working. i cant use it to navigate which forces me to use a wireless mouse to be able to navigate at all. i was wondering why this happens and if there any soulution. the projector is plugged in through usb and im not sure if that might be the problem ?

I wouldn't expect a projector to affect the trackpad like that. Possibly if you go into System Preferences -> Accessibility -> Mouse & Trackpad and uncheck Ignore trackpad when mouse or wireless trackpad is present.

HT201412 My iphone has completly stopped working have tried holding the sleep wake buttons etc and an apple icon appears but then goes and nothing happens.

My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.

see here
http://support.apple.com/kb/HT1808

Word Completion Stopped Working

Hi,
My word completion stopped working on my Macintosh. I tried shift-space, but nothing happens. Anyone know how to resolve this?
Thanks!

I had to create a new workspace and project, then copy all my code into the new application. I was able to import my skins, scripts and assets into the new workspace. I should have remembered this because it happened before. I was able to search Google for some hints on how to solve this issue.

My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone

My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone. Any suggestions?
Thanks.

sorry. seems to be resolved.

Hi I was using my iPhone 4s like normal and all of a sudden my touch has completely stopped working I have resettled my iPhone numerous times I don't know what to do ?

My iPhone 4s touch has completely stopped working resettled numorous times still won't work

In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.

Help! My iweb app has just completely stopped working. It won't allow me to create a new site or open a previously built site. Please help, my deadline is fast approaching.

Help! My iweb app has just completely stopped working. It won't allow me to create a new site or open a previously built site. What should I do? Please help, my deadline is fast approaching.

What system and iWeb versions are you running? What happens when you double click on the iWeb application when trying to launch it?
OT

Upon opening itunes it will process the artwork, then proceed to determine gapless playback information. It will analyze a few songs the completely stop working. Any Ideas?

Upon opening itunes it will process the artwork, then proceed to determine gapless playback information. It will analyze a few songs the completely stop working. Any Ideas?

Repeated execution of the "determining gapless playback information" process may also be a symptom of corruption in your iTunes Library.itl file (the main iTunes database). If you have a recent backup it may be worth restoring that (especially if it immediately precedes addition of the skipping files). However, the two symptoms you are seeing may be interrelated, i.e., the "determining gapless playback information" repetition and the skipping music may both be caused by incomplete or corrupt media files. If possible, find and (re)move all the media files - you should be able to do a date-based search in Windows Explorer - and try restarting iTunes. Of course, you should backup your library first so that it can be restored if the media files are OK.

Satellite A130/135 Completely stopped working

I have a Satellite A130/135 laptop that completely stopped working. During use it turned off and became completely unresponsive. Even the lights that show that the laptop is charging/plugged in wont light.
Does anyone know what the problem is?
Im clueless about what i can do about this so all help is appreciated.
Message was edited by: kseagles

Hi
I think its really not easy to say what the problem could be
I can only suggest
According to your message nothing appears on the screen not even if you would try to boot from the recovery disk or other bootable disks. Is it right?
You could try one procedure;
- Remove the battery and disconnect the AC adaptor from the notebook
- Wait several minutes (~30min)
- try to boot up the machine
Check it out but if you will be not successful then an hardware malfunction might be the reason for your issue and you should ask the local ASP for the help!
Bye

Adobe reader has completely stopped working

Win7 Professional 64bit, Core i7, 4GB, Reader 10.1.4.
I have been using reader for more years than I can remember. I use it
all day, every day - there is almost never a time when Reader is
absent from my desktop.
BUT... Today Adobe Reader completely stopped working. I was using it
quite happily this morning, on a PDF which I have opened dozens or
even hundreds of times. I needed to switch to another document - when
I tried to open it, (or one of about 100 others I have also opened
many times), I saw nothing appear on the screen, the cursor switched
to pointer/busy, and then cleared after about 5 seconds. The only
indication that anything happened was a blind ACRORD32.exe process in
the task list. I rebooted - same result. I uninstalled Reader and
reinstalled it from the Adobe download site. Same result. Reader is
simply no longer functioning in ANY WAY WHATSOEVER. This now happens
EVERY time.

You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/

My HP Pavilion g6 has suddenly gone slow and the mouse has completely stopped working

My computer has suddenly gone slow and the mouse has completely stopped working. The keyboard works on and off. I ran an HP PC hardware diagnostics UEFI which gave me this result:
smart check: passed
Long DST: Failed
Failure ID: PLQ77T-00074B-MFPWWI-61FF03
Can anyone please help?

The hard drive needs to be replaced. Post back for purchase suggestions and installation instructions.

How do i fix my home button it has completely stopped working after i dropped it and now its frozen on the apple screen?

so yesterday i dropped my iphone and the home key stopped working. i had to turn the phone completely off to change screens and get back to the home page. today i turned it off to get back to the home screen and now it is frozen on the apple screen. its been like this for about an hour or so. i plugged it into the computer and it still hasnt done anything. i try to reset it but of course since the home button isnt working it wont allow me to do so.
does anyone know what to do besides taking it to apple?

You can try the steps recommended in the User Guide. If they don't work bring your phone into Apple for evaluation.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Router (WRT310N) Just stops working...

Well I play Halo and whenever I host a server, there's usually no issue with the lag or anything, but usually after I restart a game, maybe 10 minutes into the new game the router just stops working completely... It's still on but is not connecting to the internet or anything, it doesn't work until I shut it off and put it back on..
Can someone help me with my problem?

I guess you should try to upgrade/flash your router's firmware...
Download Firmware 3.23 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
See if this fixes your problem...

My iphones touchscreen will completely stop working

My Iphone has been doing this a lot lately. The touchscreem will just completely quit working, the buttons work but not the screen. Its very frusterating because I cant even use it. I also have hard restarted it many times but it does no good. Apple support needs the ime code or whatever but I cant even access that.

Hi Brian71997!
I have an article for you that addresses this issue, just in case you haven’t seen this article or tried all of the troubleshooting steps just yet:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
I also have an article that outlines how to find your IMEI number that is needed by Apple Support:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/ht4061
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Automatic address completion stops working after upgrade

I recently upgraded a PowerBook G4 to Leopard. It was actually a clean, ground-up install. I configured Mail to connect to Apple's server, and all the mail was downloaded as expected.
Just one problem - the autocomplete feature for addressing mail seems to include only addresses entered since the upgrade. Is there any way to get it to scan the complete list of e-mail to populate the previously used addresses? By the way, the auto complete feature IS enabled in preferences, and it DOES work with addresses that have been used since the upgrade.
Thanks for any help!

Thanks for the response - I can't argue with you regarding the possibility of cramming the recent addresses list with crap.
To answer your question, it does populate from AB and from recent addresses added since the reinstall, it is the less recent but still relevant addresses that I'm trying to get.
The situation is that this is my elderly mother's computer, and she has grown accustomed to using the automatic completion feature (accustomed meaning dependent upon). The upgrade turned into a clean install unintentionally, and the question is how can we repopulate.
Ideally, there would be some way to tell Mail to scan the "Sent" mailbox for recent addresses to populate from. If I have to essentially go through her sent box and make AB contacts out of the addresses, I'll do it, but I'm really hoping there is an automated approach.

WRT310N Completely stopped working.

Similar Messages

Maybe you are looking for