WRT310N v1 firmware upgrade versions

I have a WRT310N, apparently v1 since there's no version on the label and the firmware was a 1.x version initially. I've upgraded it a couple of times and it's now at 1.0.07-LS-HND. I've noticed there's now a v2 of this model. Is it possible to upgrade from 1.x to 2.x?

Well its not possible to upgrade from v1 to v2. Basically v1 and v2 are the Hardware version. If you have v1 hardware then you need to upgrade the firmware of your router with the hardware v1.

Similar Messages

Creative Zen Touch Firmware Upgrade version 1.01

Hi Everyone,
Just to make you aware, a new Zen Touch firmware has been posted on our site:
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenTouch_PCFW_L4__0_03.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENT-FWARE--L4
<DIV id=ShortDesc>This firmware upgrades your Creative Zen Touch player for improved functionality.
<DIV id=Fixes>
<EM>Fixes:</EM>
Improves player functionality when the Random and Next buttons are pressed.
Resets the Custom EQ settings when resetting your player's settings.
Improves the display order of the Touch Pad sensitivity settings.
Improves the continuous playback of WMA and MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition (Me)or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Touch installed</LI>
<EM>Note:</EM>
To install this firmware update, do the following:
Download the ZenTouch_PCFW_L4__0_03.exe file into your local hard disk.
Connect the player to your computer.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI></TD></TR></TBODY></TABLE>
Cat

'Thanks a million for the link, KokChoy-CL! You are now on my X-mas present list.
I have been using the .0.03 firmware, but recently I read http://forums.creative.com/t5/MP3-Players/Zen-Touch-Custom-EQ-Frequencies-Wrong/m-p/64205" and wanted to try out the .00.06 firmware. Comparing from memory and using custom EQ, lows and mids sound much more clear now while bass is a bit more on the light side.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

How do i know what version of the Firmware Upgrade 1.01

Op
ps.
What i was trying to say is how do i know what version of the firmware does my player have installed on it,
I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

Just access the player Menu and then scroll to the option 'Setting'->'Information'.
Jason

The firmware upgrade file is not supported on this hardware version MI424-WR Hardware Ver. C

Hello - I have been troubleshooting for quite some time a problem that only occurs on my wireless devices. 8 out of 10 times I fail to obtain a IP address from my MI424-WR. My connection to the device is successful, however, DHCP times out. I have connected to many other wireless routers in other locations in the last 4 weeks and have isolated my issue to my connection with my FIOS router. That is to say that when I am elsewhere I do not have this problem. I contacted support today, and the tech I spoke to was very nice and also clueless. What is the latest/current hardware ver of the MI424-WR Verizon is shipping? The tech said he could not tell me what ver the one he had in a lab was. If l log into the router under firmware upgrade I notice the message in my subject. I have had FIOS here with the same router since 9/2007. Any help would be apreciated.

That brings up something I have been curious about...could you see if this might work for you?
-First and foremost, log into the router
-At the top click Wireless Settings
-Go into basic security settings on the left and change the channel to 11 (yes, I know this doesn't work for all but please read on) and apply
-Now back on the left side menu choose advanced security settings, enter 802.11b/g Mode
---Honestly, most people should need G only by now, but choose what you need here (avoid mixed) and apply
-Go back onto the left menu and try advanced wireless settings again but this time choose "Other Advanced Wireless Options" at the bottom
-Change MTU to "manual" and enter in "1492" in the field it provides and apply
-Now at the top right go into advanced settings
-Click on the link for "System settings"
-In here UNCHECK the "Enable Logging" and "Low Capacity Notification" options and apply
I don't think they would be able to tell you which version is being shipped, because I am sure the new routers are coming with the new firmware and the old they send out first. But yeah, give that a shot and see if that does anything to help your wireless machines connect. I am kind of curious if that will change anything.

WRT54GS Version 5 Firmware Upgrade

I am confused as to how to update the firmware on my WRT54GS Version 5 Linksys router.
I went to the support section on here, but there are five different options of router firmware upgrade. I bought this a year ago and figure it needs the update, can someone help me?
The choices I found on here are:
    Upgrading the Linksys VPN Router's Firmware
     Upgrading the Linksys Wireless-G Access Point's Firmware
     Upgrading the Linksys Wireless-G VPN Router Firmware
     Upgrading the Linksys Router
     Upgrading the Linksys VOIP Router's Firmware
Which one would I want for this basic network router? The reason I ask is because my wireless Internet is constantly down. It won't work unless I do a hard reset of the router each time. It is annoying that I have to do this all of the time. I have never had this problem in the year I had it until six weeks ago. I have to reset it numerous times to get it to read the Internet and then go into the settings and rename it each time. Also, the router and my PC and my landlords laptop always connect through to the router fine, it is just the Internet causing problems.

Hi… you can use choice no. 4 which you’ve mentioned, enter the model number >> WRT54GS >> select version 5 and save .bin firmware file on computer and upgrade it according steps…

WRT300N Firmware v0.93.9 - which upgrade version can I install?

I think I can upgrade my firmware, but I don't know which version.
The firmware version on the web interface says v0.93.9. But the version on the CD says 1.3. Neither of those choices are available when I go to the Download page at Linksys.
Can someone tell me which firmware version I can safely upgrade my router to?
Thanks.
KWilder

Your router is WRT300N V1...
Download Firmware 3.00 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Does each new ios firmware upgrade contain the features from previous versions?

Does each new ios firmware upgrade contain the features from previous upgrades?

Not necessarily.
Just like OS X, somethings may be removed.

WRT310N-E1000:Firmware installation ver.2 FAILED

I recently was looking for a new firmware upgrade for my WRT310N because I heard it could make my network operate faster. I saw that there was a version 2 of my router's software here, so I uploaded it on my router. It said it was successful!
As it turns out... I now have a brick. It is very frustrating when it doesn't respond to anything. Does anyone have any information on how to get my router back from being a brick, and installing the firmware correctly?
Thanks!

The firmware version is different from the hardware version. This must be the reason why your device got bricked. You should have sticked with the correct hardware version of your router. If it still responds to a ping then you can still get that to work. But if not, and warranty still applies then you can get that returned to the store where you bought it from and replace it.
First, set a static IP on your computer and have that connected to one of the ports of your router 1234.
Assign a Static IP Address on Your Computer
On the command prompt try to ping
Ping the Router
Download this file and use it to flash the firmware
TFTP Download 44.3 KB...
Double click the TFTP.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Firmware upgrade crippled cp1025nw

LaserJet CP1025nw color: was working flawlessly
received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
ran upgrade 4/3/2012 from iMac, OS10.6.8.
got error: 'update failed'
print queue says 'printing', cp1025nw doesn't respond.
printer lights: orange triangle enclosed exclamation mark plus green semicircle
This means: fatal error, per the user manual.
manual instructs to turn off, unplug, plug-in, turn on. I did this several times.
printer lights still indicate: fatal error.
HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                  tried to print configuration page: got error 'cannot establish two-way communication with the device'
                  printer and computer are connected with USB cable, (this cable / port communicates without issue to Epson inkjet printer)
Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                  has routinely printed from this computer previously.
error message in printer queue: 'error - printing',
Dell said 'found new hardware' tried to install with HP cd-rom
                  error message said 'the hardware was not installed because the wizard cannot find the necessary software'
ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
print test page: no response from the cp1025nw
What should I try next?

Since my last post I’ve retried the same troubleshooting described before, this time just from the PC. The result is still the same. Lights on the cp1025nw indicate “fatal error”.
Does anyone know how to put this printer into ‘bootcode’ mode? I’ve read about this in some other posts about HP firmware updates trashing printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and
http://www.fixyourownprinter.com/forums/laser/63535
Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
HP: How do you start up these printers when they are just manufactured to load the firmware?

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Firmware Upgrade: p1102w, p1606dn, m1210 series, cp 1025nw

The following products require a firmware upgrade (FW older than 20130210 ) and re-registration with ePrint center for use of the ePrint feature. Please print a configuration page to see what version of firmware your printer has.
HP LaserJet P1100 Series
HP LaserJet Pro P1102w
HP LaserJet P1600 Series
HP LaserJet Pro P1606dn
HP LaserJet M1210 MFP Series
HP LaserJet Pro M1212nf MFP
HP LaserJet Pro M1213nf MFP
HP LaserJet Pro M1214nfh MFP
HP LaserJet Pro M1216nfh MFP
HP LaserJet Pro M1217nfw MFP
HP LaserJet Pro M1218nfs MFP
HP LaserJet Pro M1219nf MFP
HP LaserJet Pro CP 1020 Color Printer Series
HP LaserJet Pro CP1025nw
If a customer has one of the above devices, has FW older than 20130210 and has registered the device with HP ePrint Center, they will need to update the firmware on their device in order to continue to use the ePrint feature.
To obtain the firmware, please visit www.hp.com/go/eprint and do the following:
Select your device series from the list.
NOTE: Reference above list for help on finding your device series.
Select the appropriate operating system for your PC.
Click the RUN button.
Follow the on-screen instructions to download and install the firmware upgrade for your device.
After firmware upgrade is complete, you may need to reset Web Services on your device and re-register the device with the HP ePrint Center by doing the following:
Access the Embedded Web Services (EWS) by entering the IP address of your device in your web browser’s address bar.
Click on the HP Web Services tab.
Click the button to remove Web Services.
Click the button to enable Web Services.
Print the information sheet to get the new ePrint printer code for your device.
Go to www.hpeprint.com
Sign in to your ePrint account.
Select “Add a Printer” to your Account.
Enter the new printer code for your device (from the information sheet).
10. Enter a new customized email address.
NOTE: Your previous customized email address may be unavailable. If that occurs, please choose a new customized email address or enter your old customized email address and choose from one of the suggestions presented.
11. Change your ePrint settings as needed.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

@jrboozer,
Have you tried going into your Start menu, looking for the HP folder, then using the wireless configuration utility? When I set the wireless up on my machine, this was how I did it and it worked beautifully.
Please let me know if you need any other help.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Firmware upgrade, then lost

Hi,
Quickly following automatic firmware upgrade on 1 week old Time capsule, network is now lost. Airport set up utility can't find Time Machine .. others experience the same problem? TM feels hot .. perhaps overheated due to firmware upgrade. Solutions welcome.

Your computer came with OS 9.0.4 installed. OS9.1 is required for Classic so is handy to have, and apparently your firmware installer requires 9.2.1 You can use free updaters to update to any later OS9 version from any earlier one.
I don't see any option but to obtain a used copy of OS9. Make sure you get the gold full retail version rather than a machine specific version since the latter will only work in those computers for which they were designed. You can get away with a machine specific version as long as it exactly corresponds to the model and build of yours, but that is often hard to confirm until too late in the purchase.
Note that any drive you want to use with OS9 either for purposes of installing OS9 or for running software will have to have OS9 drivers present on it. These are installed when you format a drive and cannot be installed later without reformatting the drive (and losing everything on it). If your computer still has its original drive then those will likely still be on there unless you reformatted the drive with OSX and did not select the keep OS9 drivers option (there's no harm in doing so and it saves a lot of trouble for doing exactly what you are trying to do). You can can have a drive present that doesn't have the drivers but it simply won't be seen by OS9.
Disconnect all third party hardware (including PCI cards) when updating the firmware.
Message was edited by: Limnos

Firmware Upgrade now no file sharing

I recently installed a firmware upgrade on my E3000 to firmware version 1.0.04.build 6. Since the upgrade I am unable to see any of my files on my network computer which is running windows 7. Before everything was fine and I could stream to my dvd players and dish receivers. I've tried everything I can think of to fix this problem. Any help would be greatly appreciated.
Thanks in advance.

Hi Mr. Bernard,
Thank you for your question.
However, the Small Business Support Community is limited to Cisco Small Business Products and the E3000 is not a Cisco Small Business Product.
Your question below relates to a Cisco Consumer Product which our community would not be able to help you with.
The best area for you to post your question would be at the Linksys by Cisco community: http://homecommunity.cisco.com/community.
Regards,
Diego Rodriguez
Cisco Small Business Community Engineer

Firmware-upgrade failed router not accessible

during firmware-upgrade the connection to E4200 got lost due to power-outage, now the E4200 router is not accessible, power-led flashes ...
the factory-ip-address 192.168.1.1 responds on ping, but nothing else ...
how to get a working environment back?

Once reset the router. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
Once the light gets stabilize on the router perform the following steps:
# Open up the browser and on the address bar type 192.168.1.1, it will prompt for the username and password. Provide the username as 'admin' and password as 'admin' or 'password'. Then it will open up the Router setup page.
# Then click on status and check the firmware version. If its not updated then upgrade the firmware once again.
# Then after firmware upgrade reset the router again as explained above.
Then uninstall the existing Cisco connect software from the computer. After uninstallation then configure the router again using Cisco Connect CD as you did earlier.

WRT310N v1 firmware upgrade versions

Similar Messages

Maybe you are looking for