WRT310N & Windows Service Pack 3

I have a WRT310N with one desktop hardwired and 2 wireless laptops connected. All was working very well until I installed SP3 on one of my laptops. I could not connect wirelessly on either laptop after the installation. I ended up reseting the router to factory settings, and re-installing the Linksys setup software. I then had to back out of SP3. Instructions can be found here http://support.microsoft.com/kb/950249
Once complete, I was able to connect both laptops without any trouble. Consider your options carefully for SP3. - Cheers, Art

> The Recreate Site Cache option is disabled...Maybe that
is for when I am
> connected to the server
Definitely not. The site cache is local. But I intended for
you to
manually delete the user site cache file as targeted in the
article.
> I build the site with Dreamweaver and then publish
> with Microsoft Web
You mean ExpressionWeb? Why?
Try this. In Site Manager, select the site's name, and click
on the EXPORT
button to export this definition to some easy-to-find
location on your hard
drive. Then click on the REMOVE button to delete that site
definition.
Then click on the IMPORT button to import the definition you
just exported.
Better now?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Charlie Rockit" <[email protected]> wrote
in message
news:gabnak$7uc$[email protected]..
> The Recreate Site Cache option is disabled...Maybe that
is for when I am
> connected to the server...I build the site with
Dreamweaver and then
> publish
> with Microsoft Web...
> Haven't moved or renamed anything like the tech note
says also am changing
> a
> main part of the template a 'locked' area of the
template...I have two
> sites
> that used to work a week or two ago and now neither of
them will update...
> Thanks for taking the time to help me with this problem.
>

Similar Messages

ISE Posture Condition for Windows Service Pack and Remediation

Hi,
We having ISE ver 1.1.1 and currently on PoC. I have the following points to be clarified for Posture and Remediation.
1) How to configure a condition to check Windows Service pack (may be more than 1 Windows favor such as XP, Win 7 and Win 8) and how to remediate in case client is not complying with Windows requirement.
2) I configure AV condition and looks its working fine, however I still couldnt find the place to how to remediate in case client is not having proper verion and AV definition on his PC.
3) We have a Authorization profile configured with dACL"Posture Remediation" where we allowing AV server update url and also matching ACL configured on switch "Posture Redirect", wants to know the exact purpose on these two ACLs.
4) where can we see the logs of none-complaints logs and find out the reason for non-complaints
appreciate if someone can please give us a proper document to achive the above task or send me any working senario configuration steps.
thanks in advance.

1. Windows Server Update Services (WSUS) remediation remediates Windows clients from a locally managed WSUS server, or Microsoft-managed WSUS server with the latest Windows service packs, hotfixes, and patches (WSUS updates) for compliance. You can create a WSUS remediation where a NAC Agent integrates with the local WSUS Agent to check whether the endpoint is up-to-date for WSUS updates. You can also duplicate, edit or delete WSUS remediations from the remediations list.
You can configure Windows clients to receive the latest WSUS updates from a Microsoft-managed WSUS server, or locally administered WSUS server for compliance.
The Windows server update services (WSUS) remediations list page displays all the WSUS remediations along with their names, description, and as well as their modes of remediation
check the following link for configuration
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1554782
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1554884
2.for AV/AS Remidiaton configuration check this link http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1657420

Does iPod Touch 16gb requires Windows Service Pack 2???

Last Month, my computer is Windows Sp2,and now i asked my aunt to find someone who formats a Personal Computer to format my computer again (because there are many errors)...And then my Computer is now normal,and the service pack is Sp1.Does iPod Touch 16gb requires Windows Service Pack 2 to Connect to iTunes library?Please answer ASAP.

http://www.microsoft.com/windowsxp/sp2/default.mspx

Can't upgrade I tunes because of problems with Windows Service Pack 2

My daughter and I got shuffles for Christmas. I am unable to upgrade to the necessary version of I tunes because I do not have SP2. When I try to download the windows service pack 2 my computer crashes. Any suggestions? Are there any ways around this?

Hi there
It could be that this particular file has some corruption. It could also simply be that the number of objects in the file is somewhat taxing your PC resources.
You might try what is outlined in the link below and see if it helps anything.
Click here to read
The post you are likely interested in was made by Jayashree and involves tweaking a setting in the Windows Registry.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

ITunes stopped working after Windows Service Pack 2

Maybe it's a coincidence, but I've been having all sorts of problems loading the latest iTunes version (64-bit) ever since I downloaded (not by choice) WIndows Service Pack 2.
iTunes just won't open.
First it would open and say that the color scheme had been changed by some setting somewhere.
Then it wouldn't open at all.
I've fooled around with permissions and compatibility settings -- I've reinstalled the latest iTunes for WIndows 64-bit -- and iTunes just will not load.
I've seen some evidence online that I'm not alone in this problem, though it's hard to tell. The solutions I've seen seem to be a bit complicated -- does anyone have any information on this problem or am I going to have to go back to an Apple computer if I want to continue using iTunes???
Thanks for any help.
B
PS For now I've got to leave on a 4 -hour trip for which I'll have no music thanks to this problem -- so any and all help will be greatly appreciated.

Roll back the service pack.(uninstall software through control panel.) Does it work again?
Reinstall service pack. Make sure antivirus and all other software is not running in background. Reboot.

Airport extreme with windows service pack 2

I have just recently bought a macbook pro laptop, & have been corresponding with a forum member about a wireless setup.
I want to have a wireless set up with a PC desktop with windows xp home service pack 2 that is stationed in the kitchen. This was recommended to me in this forum. Right now the PC has an Ethernet black box, with at&t DSL service. It has one yellow Ethernet cable coming from the black box to the PC & one grey DSL cord coming out of the black box & connects to a phone in the kitchen. I bought the laptop for my online classes so steady reliable internet service is crucial. Upon reading the specs of the airport extreme however got me a little concerned about which service pack I can use.
Here is my question & comment from another member on this forum;
I just noticed a PC has to have windows service pack 3, I have service pack 2, will it work with service pack 2? I am reluctant to update to service pack 3, my story behind my reluctance; the last time I did it, my PC completely crashed, the hard drive died. It had to be replaced, & ever since I get a little yellow alert to update to service pack 3, but I have not done it out of fear of another meltdown. Right now it is the only computer in our house, & I need it for my online classes. Last summer when I tried the service pack 3 update, & subsequent PC meltdown, I had to go to a public computer lab to finish off an online class, so I do not want to go through this again.
And this is what they said;
+That will give you wired internet access at the PC. Of course, the MacBook Pro will be wireless. I am not sure about the technical specifications required for the Airport. My initial reaction is that you should be fine to use the Airport as just a router with the PC with Service Pack 2. I think SP3 is just required for administration of the Airport using the Airport Utility for Windows. But, you could administer the Airport with your MBP. You may want to confirm this in the Airport forum unless somebody else here knows for sure! Sorry!+

Which would be more powerful & reliable? the newest airport extreme or the aiport with the 500GB time capsule?
Again, it will depend on what your networking requirements are. If we are talking about support for Time Machine backups, then only the Time Capsule (of the two options you listed) would work. Apple doesn't currently support these backups to drives attached to the AirPort Extreme Base Station.
Would I be better off with something that is just for wireless internet? or a combo unit time capsule & airport?
If you don't have any networking gear now, then it may make better sense to go with a combination unit.

Unable To Install Windows Service Pack 3

Hi,
I just reinstalled windows xp (32bit)for the 3 time in as many months, and I've ran into a problem with the reinstallion Windows Service Pack 3. I keep getting an error that says something to the effect of 'file x can not be found. are you sure (windows dl location) is correct. would you like to retry.' and this repeats a few times until I lose my patience and give up. Anyone know how to fix this?
Cheers
Alex

Hi Alex,
maybe this http://support.apple.com/kb/HT3841 can help you.
Also if you have any kind of 'unneccessary' external devices connected while trying to update, like external harddisks, printer, scanner, etc., disconnect them before applying the update.
Hope it helps
Stefan

Getting Windows Service Pack

Is there a way to programmatically get the service pack for the operating system?
I know System.getProperty("os.version") will give me the operating system version, but I don't see a property that holds the service pack. It looks like I may only be able to get the service pack by creating a DLL with a function that gets the Service Pack and then call out to that DLL from Java. Is that correct? Thanks.

You can retrieve Windows Service Pack using System.getProperty ("sun.os.patch.level"). In my Windows 2003 SP 1 and JDK 5.0:
os.name = "Windows 2003"
sun.os.patch.level = "Service Pack 1"

Every time I try to install windows service pack 2 I get error message WindowsUpdate_80004005

When I try to install windows service pack 2 I get error message WindowsUpdate_80004005, has anyone else had this problem and how do you fix it

If you have an external drive (USB thumbdrive or hard disk) connected, disconnect it and try the service pack installation again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Microsoft Windows Server 2003. Move from SP1 to Windows Service Pack 2?

Hello,
Our hosting system is:
Microsoft Windows Server 2003 R2 Server 5.2 Service Pack 1 (32-bit)
or
Microsoft Windows Server 2003 Server 5.2 Service Pack 1 (32-bit)
on which we have a Oracle Database 10g 10.2.0.3.0
running.
Now our IT is demanding the Windows Service Pack 2 to be installed on the server.
Are there known issues or can this be done (about 30 patches) without any considerations?
Thanks,
Marco

Oracle's general policy is:
Oracle certifies against the specific Microsoft operating system (OS) and, if applicable, service packs (SPs) stated in the Oracle product documentation. Oracle will support the use of our products on any later SP or OS security patch as soon as that SP or patch becomes generally available. Depending upon the severity, quantity, and impact of the SP or patch-related issues found, Oracle may recommend that customers wait until relevant Oracle patches have been released before upgrading to a particular SP or OS patch. Oracle may recommend or discourage the installation of specific SPs or patches if it will significantly affect the operation of Oracle software, either positively or negatively. If such a statement is deemed necessary, then Oracle Development will disseminate this statement in as timely a fashion as possible after the release of the SP or patch.
There are no known issues with ServicePack 2.
Werner

Toshiba Support for Microsoft Windows Service Packs ?

Does Toshiba provide Downloads,
for the Microsoft Service Pack
( For example Windows XP Service Pack ) ???

The easiest way for you to find Information about Windows Service Packs is to surf on the Toshiba Website of your Country and look at Support & Download.
There you find the a Category Microsoft Service Packs.
The Link for Toshibe Europe for example is -> http://eu.computers.toshiba-europe.com/

Trouble with Windows Service Pack 1 ?

I am using
Adobe CreatePDF, and because I am using it with a musical notation software program
, Finale, I have to use the Adobe Desktop Printer, to convert the file
s. This has worked very well for a couple of months but, the other day I attempted to us
e it and it doesn't work. I contacted Adobe, through their online chat room and a
fter trouble shooting my computer, the tech said that the Adobe Desktop Printer does not work
now with Windows 7, Service Pack 1. They are working on the problem. Has this been addressed on the forum yet? I'm sorry, but I couldn't find it if it has. Anyone else having this problem. It's really put me in a bind. How are we to know when the issue has been addressed?
Thanks.

I'm sorry, in the Subject Window, I neglected the "7". It's Windows 7, Service Pack 1.
Thanks.

Get Windows "Service Pack Nr"

I use Windows NT SP5. (SP = Service Pack)
How can I get the information SP5.
with System.getProperty( )
I get os.name and os.version but not the SP.
I know it's OS specific.
But is there any class / commands which gets this value "SP5".
IF not, is it possible to get this value from the registry
If yes, how can I read the registry file to get it :(
thanks for any help
Aykut

The Windows registry is a normal file so you could
just search for "SP5" and if it's not
found you know the user doesn't have your service pack.
(Suggesting that this is really saved there)

Clean access rules and Windows service pack 3

I am having a small issue with our Clean Access Manager blocking any Windows XP computer that has service pack 3 installed. The main failure it is giving in the reports is this
Failed Checks:
pc_Windows-XP-SP2, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 2]
pc_Windows-XP-SP1, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 1]
The key that is there when sp3 is installed is this:
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 3
I have verified that pc_Windows-XP-SP1 and pc_Windows-XP-SP2 are there as well as created a check for service pack 3 eric_pc_Windows-XP-SP3 and added the check to the rules governing windows updates for XP pro/home and windows media edition. But for some reason they are not taking effect. The CAM is running version 4.1.3.1 and the the CAA is version 4.1.3.2. Any assistance would be greatly appreciated.
Thank you,
Eric

Here is the configuration guide for the Clean Access Manager which will help you :
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cam/m_instal.html

Windows Service Pack 3

I'm not sure if this is the proper place for this question but here goes...
I am running Windows XP with Service Pack 2 on my Mac. Windows wants me to install Service Pack 3. OK, fine, but every time I try to install it I get a message that I need another 4 megabytes of memory. I just uninstalled two games that took a total of 300 megabytes and still get the same message. There is also a MS Office update I have to install.
Has anyone else had this problem and knows how to fix it?

Please look at *[_This Solution_|http://www.windowsreference.com/general/error-there-is-not-enough-dis k-space-when-installing-sp3>*.
Axel F.

WRT310N & Windows Service Pack 3

Similar Messages

Maybe you are looking for