WRT320N Can't get IP Address - only using 1 wired port - no internet access - web setup pages hang

Just bought Linksys WRT320N to replace Netgear MR814.
Can't get connected to internet using Linksys WRT320N.
Setup:
ISP: Cox Communications (Cable)
Firmware: v1.0.03 build 010 Jul 24, 2009
1 wired - port 1- to Windows XP SP 3 Dell Desktop
Setup Attempts:
1. Tried to setup using install CD. Kept erroring out with Error 302: Internal Error. tried this 3 times
2. Went through the reset, power down, power up procedures.
3. Ping 192.168.1.1 = success
4. Connected to 192.168.1.1 via web browser
5. Set MAC Address = computer's MAC address
6. Set MTU = Auto (1500). Also tried Manual 1492
Was unable to get IP address using IP Address Release and IP Address Renew. Internet IP Address still = 0.0.0.0
Note that the web page will always get stuck after perfoming a couple of actions (like after switching between tabs). Message in bottom of browser is "Wating for http://192.168.1.1/Status_Router.asp". And on the screen the hourglass symbol never goes away.
Note that the old Netgear router still works fine and I am currently connected to the internet using the Netgear router. I'd appreciate any help getting the new Linksys router functioning/connecting to the internet/obtaining and IP address.
Thanks for your help.
Solved!
Go to Solution.

I don't know where I was unclear: you wrote before that you have used the mac address clone function on the WRT to clone the MAC address of the PC. This way the WRT "pretends" to be the PC if you connect the WRT internet port to your modem.
However, the PC is not the device which you used before to connect to the internet. The PC was not the device which was connected before to the modem. If you connect the PC directly to your modem it won't get an IP address either. It won't have internet.
The problem is that your ISP only allows you to have a single active internet connection at any given time. If you simply connect a different device with a different MAC address to your modem this other device won't get an IP address. As you have connected the Netgear router to your modem and you have internet then you have to clone the MAC address of your Netgear router. That's the device which is connected to your internet and that's the MAC address for which your ISP has locked your internet connection.
Thus, one more time: clone the MAC address of the netgear router (the internet or WAN port MAC address) on your Linksys router. Then the Linksys pretends to be the Netgear router and your ISP should accept the Linksys router. The netgear router should have a status page in it's web interface which shows you the correct MAC address to be cloned.

Similar Messages

Where can I get a public IP w/o an attached internet access service?

I currently have a 16Mbps service with my ISP without a global/public IP address. In order to get a global IP address from my ISP I need to switch to a 100Mbps service. The cost for the 100Mbps service including the global IP address would be 4 times as much as I am paying for the 16Mbps service.
For that reason I am trying to find out if it is possible to get a global/public IP address from somewhere else.
Regarding this issue I have two questions:
1. Are there providers from whom I can either buy or rent a public IP address without a linked internet access service?
2. If there is, can I use that public IP with my current ISP?

Hey,
Do you need an IP address, or just a static hostname? Try a Dynamic DNS service, like dyndns.com, with a client like they have here: http://www.dyndns.com/support/clients/
This kind of setup will give you a an address like yourname.dyndns.com, which will always point to your public IP address.
-Matt

How can I get Adobe Reader for a PC with no Internet access?

Hi
I have a neighbour who doesn't have Internet access. I have downloaded the installer but the installer requires Internet access. Can I install it on my computer and copy the program file or folder to my neighbours computer?
Thanks
Geoff

Good day Geoff,
You can download the Adobe Reader 10.0.0 installer .EXE file from here:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/AdbeRdr1000_en_US.exe
Once you've downloaded it, you can burn it to a disc or copy it to a thumbdrive to bring to the PC that's offline.
Please let us know if you have any questions.
Kind regards,
David

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
Thanks for your help

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

I can, I can't get my address book to snyc with my ipad2. I'm using Outlook express 2004. I followe the steps in itunes, but still no contacts. Any suggestions?

Can't get my address book to sync to IPAD2. Using Outlook Express 2004. I followed the steps in Itunes, but still not contacts. Any suggestions?

Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though.

How can I get the address book to sort by "Last" name (using v 31.3.0).

After a computer crash, I had to load Thunderbird (v31.3.0) back into my machine running Windows 8.1, and I successfully imported my address book back up file into Thunderbird (v31.3.0).
My problem is that I don't see an option to sort the address book by "Last" name, which was available with the version of Thunderbird I had before the crash.
How can I get the address book to sort by "Last" name?

In 'Address Book'
Select address book
'View' > 'Show name as' > 'Last/First'
The you can sort by Name.
Either click on 'Name' column header to change sort order,
If reversed, then click on 'Name' column header again to reverse the order.
Or
'View' > 'Sort By' > choose 'Name' and 'Ascending'

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

I use my iPad to get the address book backed up by iCloud from my iPhone. However, I cannot see the recent new contacts from my iPad. Is there anyway to check the iCloud server to see if my address book backup from my iPhone is still there?

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

I got my Macbook Air from a family member and I can't get my address book on my computer. What do I do to get the address book on it?

I purchased an Air Mac and can't get the address book on it. Does anyone have any ideas on what I should do. I have an IPhone and an IPad and they both have clouds but I don't see one on my Air Mac.

From the link posted in TD's reply
To unhide your purchases
Open the Mac App Store.
Choose Store > Sign In, then enter your Apple ID and password.
Choose Store > View My Account.
Click on View Hidden Purchases from the Account Information page.
From the Hidden Purchases page, locate the app you would like to unhide.
Click the Unhide button.
LN

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

How can i get a file header using this method cl_gui_frontend_services= gui

Hi Experts,
How can i get a file header using this method cl_gui_frontend_services=>gui_download
Thanks
Basu

Hi,
You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
TYPES: BEGIN OF ty_head, "Structure for header
             h(10) TYPE c,
             END OF ty_head.
DATA: it_head TYPE TABLE OF ty_head WITH HEADER LINE.
"Adding header details
it_head-h = 'Field1'.
APPEND it_head.
it_head-h = 'Field2'.
APPEND it_head.
it_head-h = 'Field3'.
APPEND it_head.
it_head-h = 'Field4'.
APPEND it_head.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = p_file
   filetype                        = 'ASC'
   write_field_separator           = 'X'
   header                          = '00' "<= note this
TABLES
    data_tab                        = it_tab
   fieldnames                      = it_head[] "<= Pass your header table here
EXCEPTIONS
   OTHERS                          = 1.
Hope this helps.
Regards,
Himanshu

I can't get yahoo to open using firefox or safari. I just installed updates...then the problems began. gmail is working fine

I can't get yahoomail to open using foxfire or safari. I just installed updates then the problem began. Gmail is working fine

What happens when you try?

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

WRT320N Can't get IP Address - only using 1 wired port - no internet access - web setup pages hang

Similar Messages

Maybe you are looking for