Wrt320n - problems connecting to internet after few hours of uptime - firmware version 1.0.02

Hi,
I've just bought wrt320n and I've experienced some problems with internet connection from the first day.
After some time (may be hours or one time was 15 minutes) of using the internet ( in general when playing games online like "Anno 170" and "Heroes of Newearth" ) the router hangs.
Not only the internet connection is down but the router stops responding on all ethernet ports, the admin interface can be accessed with wireless devices.
The PPPOE connection to the Internet can only be restored after unplugging the power cord of the router. Software reset from the http admin interface, or hardware reset from the router back button has no effect.
I suspect it is some problem with something controlling the ethernet ports since all are blocked and the internet comes through one of those ports.
I have to mention that one PC is using Gigabit Ethernet.
I hope some solution appears to this problem because I don't want to and don't have the time to go to return it.
Thank you in advance for any advices ,
Silviu

Have you tried to reset your Router and Re-Configure all the settings on it back again. If not then Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router...
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Once you configure all the settings on your Router, now check if you are facing the same connection problem.

Similar Messages

Problem connecting to internet after NEW 27" iMac makes up from sleep

Ok, I have a brand new 27” iMac and when it connects to the internet after waking up from sleep mode doesn't have any download speed.. See image
This only happen when it wakes up and the only way to fix it is to restart the computer. I have tried turning on and off the airport as well as messing around with other settings and nothing seams to fix it.
I am using an Apple Airport Extreme with a Comcasts 20mb connection.
This is the only computer in the house that has this problem (3 other MacBook Pros) And while the iMac is registering no download speed, the other computer are cranking out at over 20mbps.
The fix for now has been turning off the power saving setting to allow sleep. so no sleep=internet.
Any one having this problem? I don’t really want to lug it back to the apple store but I will if I have to.

after waking up from sleep mode doesn't have any download speed..
Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller
Change your router channel. Sometimes this all you will have to do.
I don’t really want to lug it back to the apple store but I will if I have to.
You don't have to. Call Apple tech support. They can give you instructions over the phone if the issue is just software. You will have to bring it in if tech support suspects you have a hardware issue as they need to run diagnostic testing.

Problems connecting to internet after installing Leopard

I have been having problems connecting to the internet after installing Leopard. I have a G5 at my office and use safari and AOL, using a cable modem and router. Everything worked perfect until I installed Leopard. About 3 days after installing Leopard on my G5 I started having problems connecting to the internet. When opening "network" in preferences it tells me I am connected, but I cannot connect. So I have to restart my computer every time in order to connect. Then to top it off, often in the middle of the day I am able to get and send e-mail with AOL, but my Safari does not connect. And even more bizare, if I am connected and sign off my AOL, I lose Safari as well. Brought the G5 into the Mac store and after trying some stuff they told me "it should work now" but ....same problems. So last Monday, I installed Leopard on my Macbookpro which I use at home wirelessly, everything worked well until yesterday when the same issue with my G5 is happening with the macbookpro. No connection, it tells me I am connected, signal is strong, but nothing.....so restart and keep going. What is going on? Anyone else having same problem? Any solutions
Roberto

Roberto,
Is the install of Leopard on the G5 and MacBook Pro an upgrade install or a clean install?
Try some simple maintenance to see if this resolves it:
1. Run Repair Disk Permissions (Disk Utility)
2. Go to Network Utility and go to Ping enter in www.cnn.com and see if the packets are received/sent. This is just to see if you can get to the outside so to speak
3. See if your cable modem manfacturer has a leopard upgrade. Sometimes hardware companies need to upgrade their firmware when new Operating systems come out

Problem Connecting to Internet after recent Software Updates from Apple

I have an old iMac 15" flat panel, running OS X 10.3.9, just ran the Software Update an hour ago. Now my computer won't connect to my wireless network via the Airport. I tried to open the Internet Connect apps from Apple and it won't even load, it has this swirling beachball has been on for 15 minutes and it says "Loading Internet Connect..."
Anybody experience something like this! Could this be another Apple blunder with their software update?
I tried, restart, remove the plist of Internet Connect, all those did not help!
Please help. Thanks

Try resetting Airport as per this article;
Resetting AirPort Express
By the way, if your problem has not been solved then leave it as unanswered until such time it is, as you will get more responses.
regards roam

Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me.

Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me what to do.

I final piece for me in the jigsaw following on from this
http://www.care4pcs.co.uk/2012/10/how-to-be-happy-gmail-user-on-iphone-or.html
is to turn off wifi when you do not need it. When I leave the house I turn off wifi, because the majority of the times when my iPhone has got very hot and crashed is when I am away from home. I suspect that if the iPhone is in the vicinity of public wifi (wheather secure or not secure) it will try and connect, even if you have 'automatically join known networks' set to off. This is easy of course if you have an unlimited data contract for your iPhone. I may be wrong, but it is working for me. It makes sense for me because it is another way of reducing the work the processor (and battery) has to do and therefore reduces the chance of overheating.
Having said that, I never had this problem with my iPhone 4. I now have a 4S.
Try it. Hope it works for you.

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to downlo

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

IMac won't allow me to login after few hours

Hi everyone...
My iMac won't allow me to login after few hours. Actually I had a limited broadband connection which is free from 2AM to 8AM. So I have scheduled some downloads to start at 2AM and end at 8AM. Before going to bed, I just put on the screen saver. When I wake early in the morning and move my mouse.. blank screen turns on and colorful spinning wheel appears, but log-in window doesn't appear. This has happened thrice till now. Day before yesterday it was fine. But yesterday and today I got the same problem. Previously also it was working fine. I can't figure out why it is behaving like this...
Initially, in Power save options, I scheduled iMac to wake up at 2AM and sleep at 8AM and then used to put iMac to sleep before going to bed. It was working fine and did the same thing for more than a month. Now I have removed wakeup & sleep scheduled options from Power save options.
Following are the settings/options selected:
1. In energy save options, I have selected the option not to put iMac to sleep when it is inactive for certain time.
2. Put hard-disks to sleep whenever possible is checked.
3. I have scheduled the downloads in Azureus, Transmission and Speed download 5.
Following are the temps and rpms:
Temps:
HD: iMac, Vista: 124 F
CPU A: 117
Airport Card: 151 F
Ambient: 83 F
GPU: 133 F
GPU Diode: 137 F
GPU Heatsink: 137 F
HD Bay1: 124 F
Mem Controller: 121 F
Optical Drive: 110 F
Power supply1: 162 F
Fans:
CPU Fan: 1198 rpm
Hard Drive: 1199rpm
Optical Drive: 998rpm
One more thing, recently I have reset the SMU because it is taking too long to boot up. To my surprise, after restarting, fan (not sure which one) started to make bigger sounds. I then had to reset SMU two times and only then fan started to spin normally without any noise. I'm scared & worried...
Someone please help me where I went wrong.... what can I do to solve this problem..
You know I purchased this iMac for Rs.86000/- INR ($2097 approx.) ... after two months they slashed the prices by Rs.20000/- INR($487 approx.)... so this is how my luck seems to be

Hello and sorry. First, if you reset the SMU. make sure you do not hold the power button down while reconnecting the cable or it will reset the SMC incorrectly.
When you say you are logging in, are you logging onto the internet, or onto the computer/user account?
If it is intermittent than it sounds like your internet and that would be best handled by your internet provider first.
The following article is good for troubleshooting issues and you may wish to bookmark it.
http://support.apple.com/kb/TS1388
Do you have the install dvd's for the computer with you?
http://support.apple.com/kb/HT1782
(another article for running disk utility)
If it is your internet you are referring to than try going to the Apple in the top left corner and clicking on it.
Than click on the System Preferences
Then click on Network
Then click on Assist Me.
Then Assistant
Maybe call it Test Location
go through the steps involved and see the outcome.
Sorry for the delay and if this does not help at all. But I will check back if you return with more information I will do what I can to help you. Also may wanna check out applecare protection plan from apple and also the article below:
http://www.apple.com/support/quickassist
http://support.apple.com/kb/TS1388
If ya can reply back with more information

VSS snapshot of 1.1TB is ending after few hours with timeout. No errors in event log

Hello,
does someone have experienced issue where starting making snapshot (forum GUI or command line) is taking a lot of time and then it just ends with timeout?
I have scenario on virtualised Windows Web Server 2008 R2 where backup is being made by Idera Backup Software but since it relies on VSS Snapshots then we can just skip this point because making snapshots from directly Windows command line or drive preferences/GUI
is ending with timeout for this single drive after few hours. Affected system has 3 drives: C - 95GB, D-1.06TB and E-120GB. C and E can be backuped correctly and only drive D has problems. System is updated with latest drivers vssadmin for writers returns
list without any errors and snapshot for drive D which ends with timeout is not generating any error in event log. I wanted to configure VSS trace like it is being instructed on this site:
http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.tshoot.doc%2Ft_pdg_traceprfrm.html
but I don't see any trace.txt file on given location. If I remove drive D from backup process it ends without errors. System was restarted many times. Only thing which is visible in windows Event log (application part) is that "The VSS service is shutting
down due to idle timeout." about 4 hours after snapshot making proces is starting.
I've contacted Idera backup about this but they can't help too much if Windows snapshot process is failing. They suggested that something can be wrong with this drive but since this is virtualised machine and all of my VM are being stored on RAID10 disk
array connected to my server using fiber connections then I don't think that this is hardware issue (especially when other two drives are located on the same LUN on disk array).
Any suggestions?
Regards

Hi,
Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure.
2. The I/O in D drive is heavy and make the shadow copy I/O failed.
3. Server is too busy to handle the request.
4. The disk is heavily defragment.
Please refer to the articles to troubleshoot the issue:
Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
http://support.microsoft.com/kb/826936/en-us
VSS timeouts during backup? What could contribute to that?
https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OS X 10.7.2 very slow to connect to internet after sleep

Following the lates round of updates and firmware updates MacBook Pro Running 10.7.2 is very difficult to connect to internet after sleep. Network diagnostics show all is fine, all the IP's DNS etc WiFi are fine Safari just won't connect. Was fine before updates

I have had this same problem since I updated to lion. I used to connect straight away. Now it takes at least 10sec.
Have noticed a few anoying bugs with lion. The other thing that somtimes happens to me is it crashing when running some programes ( iphoto '08, BBC iplayer desctop etc... ) and also when browsing some sites (quite alot on youtube)
Really hope these are sorted on the next update.

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Issue setting up eFax on HP Photosmart 7510 e-All-in-One "Problem connecting to internet"

I'm having an issue setting up eFax on my new HP Photosmart 7510 e-All-in-One. I am following the on-screen instructions and receive an error "Problem connecting to internet" when trying to register the account. The ePrint service is working, and I can use the facebook app on the printer so it seems to be connecting to the internet. I am uncertain how to resolve the issue.

Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My IPhone 4S keeps entering recovery mode after few hours

Hi,
I bought a new IPhone 4S from 12/2011. The first month of usage is fine but after I plug it into Itunes in my PC, problems start to appear. The phone keeps entering recovery mode (screen with itunes logo and USB cable) after a few days. Not long later, it automatically goes into recovery mode after 4-5 hours or randomly. I tried to hold the power with home button to kick it out but it goes back to recovery mode again after few hours. The following issues are also detected:
- Sometimes there is a blue horizontal line appear when device is rebooting with Apple logo.
- Any apps other than Apple's default apps cannot be accessed (tap the icon and it gets kick out to the home screen).
- A yellow screen is often seen and then device goes back to recovery mode by itself.
- 2 to 3 out of 10 attempts holding home and power buttons can get it out of recovery mode while 7-8 times this does not help.
I even use Itunes on PC to recover the phone as new Iphone. I went through all the settings as a new phone but the problem still persists.
I thought this is minor software issue but after seeing all these behaviors, I suspect this may a hardware-related problem.
Did anyone experience this problem before?
Cheers.

iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. Help!

I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. I did a couple of thousand trashed images and half hour later, more arrived. There are a lot of images that seem off the internet, including gif.s, png.s. Help!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

IIS Admin Service Disabled on all SCCM 2012 Distribution Points Automatically After few Hours

Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points after few Hours.
Please help and share configuration steps.
Thank you.
Regards,
Faisal Alvi
Regards, Faisal Alvi PPL

That's not something ConfigMgr does. Examine eventlog and see if there are GPOs or whatever is disabling it.
Torsten Meringer | http://www.mssccmfaq.de

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Wrt320n - problems connecting to internet after few hours of uptime - firmware version 1.0.02

Similar Messages

Maybe you are looking for