WRT320N - What do I need to do to allow me to see the laptops connecting to this router?

I am a networking noob (somewhat). I need to allow the laptops connecting to this router to see a shared storage file on the wired side of the network. How do I do this, what setting changes do I need to make.
I apologize in advance if this has been covered in a previous discussion, I did not take the time to search it out.
Thanks, Mark

The computers wired and wireless are in the same workgroup, file sharing is turned on, but the wired computers cannot see the wireless computer that are connected to the router.
I am sorry if I am being unclear. The router is connected to a LAN consisting of 20 computers (wired, outside of this router). I have a computer set up to share files across the network. I can see the computer from all other wired computers (even in different workgroups) outside the router. All computers "inside" the router (192.168.1.*** etc) cannot see "outside" the router to the rest of the wired network (192.210.***.*** etc).
I am sorry if I am being difficult but it sure seems to me that there is a setting in the router that is blocking this from happening.

Similar Messages

I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access?

I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access to the software?

http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-ena ble-office-for-all-users-on-one-mac/38bd94cc-d26c-41c9-8471-ee87d63ebfc9?msgId=0 fbd6314-a12a-4fed-85f9-d939208095ff

What do I need to do to allow multiple users to connect to a Server?

Hi,
What do I need to do to allow more than two people to be able to connect to a server via RDP?
I am using Server 2012 and I need 4 clients to be able to RDP in.
The clients will only be accessing the Server from our internal network while they are onsite.
Do I have to setup Licensing and what other steps do I need to do?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of Hari. Normally by default server will allow only 2 remote connection for administrator purpose. So you want 4 users to connect you need RDS CAL to access it. As already suggested you can purchase RDS CAL (Per User or Per Device) according
to your requirement.
After installing RD License server you need to activate it first and then you can install the purchased RDS CAL.
More information:
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

HT4993 getting error message could not activate cellular data network when trying to access the internet without using wifi. what do i need to do? i have already restore the phone.

getting error message could not activate cellular data network when trying to access the internet without using wifi. what do i need to do? i have already restore the phone.

contact your phone carrier as they handle cellular network.

I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?

I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?

uninstall acrobat standard, clean and then install, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

What do I need to do to my CSS to make the Georgia and Verdana fonts on my website show correctly in Firefox?

Why does my website's css font styling not look right in Firefox but looks right in Explorer? What do I need to do to my CSS to make the Georgia and Verdana fonts show? Right now they show as Times Roman in Firefox. I tried using all the font attributes combined in a single font property and then I separated out the font-family, font-size, etc. and neither way made them look right in Firefox.

A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

ı have installed an application about lock system but the application isnt about lock systm this is an code reader. when ı see the application's pictures this is an lock application but content not same. I have got laid...what shoul I do?

I have installed an application about lock system but the application isnt about lock system this is an code reader. When ı see the application's pictures this is an lock application but content not same. I have got laid...what should I do?

semihtinas wrote:
Please make something these fraudsters
You're not addressing Apple here. This is a user to user technical support forum. You can submit feedback to Apple here:
http://www.apple.com/feedback
Other contact information can be found using the Contact Us link at the bottom right of every page.

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

This extension?
*FireBug: https://addons.mozilla.org/firefox/addon/firebug/
Firefox 4 also has a build in inspector: Firefox > Web Developer > Inspect

I have chg my apple I'd, but it hasn't chg when I try to update my apps, what do I need to do to get it chg on the pop up screen that ask for your password?

I have changed my ID, but when I go to update my apps my old ID is still there, I have verified my new ID and signed in using it but still showing on app update sign in which is stopping me from getting update, what do I need to do to get it to change?

Did you create a new account or did you update your existing account ? If you updated your existing account then logging out and back in on the iPad usually 'refreshes' the account on it. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

What do I need for my MacBook Pro to work in the UK

I am traveling to the UK. Do I need anything special to plug it in for power being they use 220V there? And if so, what will I need.

Just get the appropriate plug. Either a converter from Radio Shack to go from the standard US flat-blade NEMA plug to the funny UK plugs, or the fancy Apple Universal Travel Kit from the Apple Store. The latter has all that you need to plug anywhere in Europe, should the yen arise to take the Chunnel Train and see the Continent.

What do I need to hook up a turntable directly to the iPhone 5s in order to record vinyl records?

What do I need in order to hook up a turntable directly to the iPhone 5s in order to record vinyl records?

A preamplifier with an RIAA equalised input for a turntable, preferably a USB one,

What settings we need to check in PS module while creating the new plant.

Dear Friends,
If we extending the new plant what all the things that we need to check in Project systems module, what all the configuration that needs to performed. Here we are using the Standard Project structure to creating the projects.
But it is not a manufacturing plant. All the service processes are takes place from this plant.
While creating the plant if we are copying from the existing plant, is that the all assignments are copying to the new plant?
Regards,
Hari
Edited by: Hari Krishna on Jan 5, 2009 10:17 AM

Dear Hari,
Mainly two settings have to be extended for using networks for that plant..
1) Extending Network type Parameters - T-code - OPUV
2) Production Order control Parameters - T-code - OPU6
Rdgs,
Deepa

What do i need to do to find myiphone I have the app in my computer, but I don't know how to find it or use it.

How do I use the find my phone app to find my phone?
what do i need to do? I have the app in my computer, but I don't know how to find it or use it.

To use Find my iPhone on a PC or Mac, open http://www.icloud.com, login with your Apple ID and choose Find my iPhone. There isn't an app for Mac or PC

What do i need to do if I can't remember the answers to my security questions.

What do I need to do to change my security questions?

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

WRT320N - What do I need to do to allow me to see the laptops connecting to this router?

Similar Messages

Maybe you are looking for