WRT330N IP does not Renew Thus all devices get disconnected

The router is set to renew the IP address for the wireless devices and it is having renew problems for some reason. I've only had this thing for a day. What is the deal? I didn't have this problem with my WRT300N. They have almost the same interface. Is their something I'm overlooking?

hi... try reflashing/upgrading firmware on the router, after reflashing firmware on the router, try resetting the router back to factory default settings and reconfigure it according to ISP settings, also edit the wireless settings on the router logon to router's setup page and try changing radio band to wide 40 MHz, wide channel to 9 and standard channel to 11, go to advanced wireless settings try changing N Transmission Rate 15-270Mbps, Beacon Interval to 50, Fragmentation and RTS Threshold should be 2304...let me know if you face any issues.

Similar Messages

My Blackberry does not start up, all I get is a red line through the battery

Hi this is my first Blackberry and seven months after purchace I phone stops working. All I get when I turn it on is a red line through the battery. I bought a new battery and the same thing. I am like at wits end, HELP!

#1. Be patient with #2.
#2. Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
Message Edited by JSanders on 08-02-2009 11:18 PM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/

Why are my emails not deleting from all devices when deleted from one? I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong? Thank you

Why are my emails not deleting from all devices when deleted from one? I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong? Thank you.

It depends on the type of email account you are using, not on iCloud. If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices. If you are using a POP (POP3) account, it won't. (iCloud email, Gmail and Yahoo are all IMAP accounts.)

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support

TS1538 When I open itunes, "Devices" does not appear at all in the left column on the screen, therefore I can not sync my ipod touch.

When I open itunes, "Devices" does not appear t all in the left column on the screen. I can not sync my ipod with my itunes library. Suggestions?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

My iCloud email does not sync to all my devices

My iCloud email (yes an @me address) does not sync to all my devices. My phone and mac sync perfectly, but my iPad never updates. If I have my mac and phone on the mail program and I archive an email it works instantly on both devices. However my iPad seems to be in the stone age. Even though I've archived all my mail and my inbox is empty on both my mac and phone my iPad still has a notification for 28 new emails going back to last week. Its like my iPad is completely seperate.

Like I said its seemless between my phone and mac. I can archive on my phone and it will immediately disappear from my iMac and vice versa. Its odd that it works on one iOS device and not another... And when I say my emails don't archive on my iPad I mean it shows the last 50 emails (because of my settings) from my inbox like I haven't already archived them already. So I have emails on my iPad from 9 days ago =\

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage

Kindle does not show up as device when plugged in USB

I was trying to transfer some files to my Kindle using the USB port. I have a Kindle 2, and a Rocketfish Micro USB cord. The Kindle does charge up so it is drawing power through the cord. But the Kindle does not show up as a device attached to my MacBook. My external HD (Firewire) and iPods (USB) all work perfectly through this USB hub.
I did call Apple (using my 30 day warranty for installing Snow Leopard) and the tech support person did not even know what a Kindle was.
Amazon says it's an Apple problem.
Apple doesn't seem to have any clue.
I've seen from various threads that USB devices do seem to have intermittent problems. Is the Kindle one such device?

Some devices do not work properly through a hub. Plug the kindle directly into your Mac and see if it works. Just because some devices work through a hub, doesn't mean all devices work through a hub. Apple does not support third party devices or third party hubs.

IPad does not appear in iTunes Devices list

My MacBook Pro, iPhone, and iPad are all on the same network, however my iPad frequently does not appear in iTunes Devices when not physically connected by USB. No problem with my iPhone. Anyone else with this problem? Any solution? (Yes, all OS/iTunes softwares are current.)
Further detail, to temporarily fix this issue, I physically connect my iPad via USB to sync it. Temporarily the iPad will be seen in the device list allowing sycing to occur while remotely charging, but at some random time later my iPad is no longer found by iTunes - again without the physical USB link. So, yes there is a work around, but it is annoying to be so up and down with this feature.
Any ideas are appreciated.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

[solved] SD card in my card reader does not appear as a device

Greetings.
I have an Asus EEE 1015PEM netbook, which has a built-in card reader.
I found some old SD cards that I am trying to get files from. When I insert them into the SD card reader in my netbook, the SD card does not appear as a device, and thus, I cannot mount it.
sh-4.3$ ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3
sh-4.3$ lsusb
Bus 001 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sh-4.3$ # insert card
sh-4.3$ sleep 10
sh-4.3$ ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3
sh-4.3$ lsusb
Bus 001 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 010: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Come to think of it, I am not sure I ever tried my SD card reader since I installed Arch on the machine (the machine was running Ubuntu before that, and there, inserting an SD card would trigger some automount magic).
You guys know what I can do to access the files on my SD cards?
Cheers,
Willard.
Last edited by willardthor (2014-06-08 17:13:35)

Trilby wrote:
And
uname -a
pacman -Qs linux
sh-4.3$ uname -a
Linux fenrir 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
sh-4.3$ pacman -Qs linux
local/alsa-lib 1.0.27.2-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.27.2-1
An alternative implementation of Linux sound support
local/archlinux-keyring 20140220-1
Arch Linux PGP keyring
local/aura-bin 1.2.3.4-1
A secure package manager for Arch Linux and the AUR written in Haskell - Prebuilt binary
local/iptables 1.4.21-1
Linux kernel packet control tool
local/keyutils 1.5.9-1
Linux Key Management Utilities
local/kmod 17-1
Linux kernel module handling
local/lib32-alsa-lib 1.0.27.2-1
An alternative implementation of Linux sound support (32 bit)
local/lib32-libxshmfence 1.1-1
a library that exposes a event API on top of Linux futexes (32-bit)
local/lib32-util-linux 2.24.1-1
Miscellaneous system utilities for Linux (32-bit)
local/lib32-v4l-utils 1.0.1-1
Userspace tools and conversion library for Video 4 Linux (32-bit)
local/libimobiledevice 1.1.6-1
Is a software library that talks the protocols to support iPhone and iPod Touch devices on Linux
local/libiodbc 3.52.9-1
Independent Open DataBase Connectivity for Linux
local/libutil-linux 2.24.2-1 (base base-devel)
util-linux runtime libraries
local/libva 1.3.1-1
Video Acceleration (VA) API for Linux
local/libxshmfence 1.1-1
a library that exposes a event API on top of Linux futexes
local/linux 3.14.5-1 (base)
The Linux kernel and modules
local/linux-api-headers 3.14.1-1
Kernel headers sanitized for use in userspace
local/linux-firmware 20140316.dec41bc-1
Firmware files for Linux
local/lirc-utils 1:0.9.0-71
Linux Infrared Remote Control utils
local/man-pages 3.68-1 (base)
Linux man pages
local/mdadm 3.3-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as Software RAID
local/mplayer 37051-2
Media player for Linux
local/pacman-mirrorlist 20140531-1
Arch Linux mirror list for use by pacman
local/pipelight 1:0.2.7-1
A browser plugin which allows one to use Windows only plugins inside Linux browser
local/syslinux 6.03pre12-3
Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE
local/util-linux 2.24.2-1 (base base-devel)
Miscellaneous system utilities for Linux
local/v4l-utils 1.0.1-1
Userspace tools and conversion library for Video 4 Linux

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

AppleTV does not show up in Devices in iTunes on streaming MacBook Pro

My setup:
- AppleTV connected wirelessly to the wireless router (Apple Extreme N Base Station).
- Windows PC wired to the router and set up as machine that is sync'd to the ATV.
- MacBook Pro connected wirelessly to the router and set up as a streaming machine.
- All machines run iTunes 7.3.
The AppleTV appears as a device on the Windows PC. No problem there.
However, the ATV does not appear in the Devices list on the MacBook Pro 99% of the time and so I am not able to select it and change the photo albums I want to link. It occasionally appears. But I have not found a pattern to why it appears and disappears. Even when it does not appear in the Devices list, streaming from the MacBook Pro works just fine. So even as I am streaming, say, a podcast from my MacBook Pro, the ATV never appears as a listed Device.
I can make the ATV temporarily appear by unlinking the MBP from the ATV and relinking it. During the link process, the ATV appears in the Device list. But it disappears as soon as the code is entered in the MBP.
Confounding problem.

how would
it be if your mac continued to show every network
device, firewire/usb drive that it had ever connected
to whether they were still connected or not.
Yes, it would be annoying if EVERY device that my Mac had ever connected to did show up all the time even after they were disconnected.
However, there are some classes of devices that you do want your Mac to remember and show as available if they are detected active on a network. An example would a Bluetooth device that you have deliberately paired and designated in the Favourites list. If it was subsequently decided that this device should no longer appear, then removing it from the Favourites list does that.
In my opinion, the AppleTV should fall in the same category. Since pairing is required and subsequent dissociation is possible by removing it from the iTunes list of allowed AppleTV units, then it should appear on iTunes' list of Devices as long as it is detected on the network. If the ATV is unpowered or if the PC moves onto a different network, that that ATV should not appear in the Devices list. There is an advantage for the logic to be implemented this way for the reason I have mentioned in an earlier post (i.e. being able to change the list of photo albums designated as available for streaming without having to go to the ATV, select the source PC, then going back to the PC to change the list).
But again, just my opinion. It's always good to discuss these things so that others can see different opinions on an issue.

MenuManager in TableViewer does not work on mobile device (tablet with Win 8)

Hi
Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP/SWT application, and it has to work on mobile device with windows 8 as well (10' tablet with windows Cool. So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu Smile - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
table.setLinesVisible(true);
table.setLayout(myTableLayout);
createColumns(table, layout);
table.setHeaderVisible(true);
tableViewer = new TableViewer(table);
tableViewer.setContentProvider(myContentProvider);
tableViewer.setLabelProvider(myLabelProvider);
MenuManager contextMenu = new MenuManager();
contextMenu.setRemoveAllWhenShown(true);
contextMenu.addMenuListener(new IMenuListener() {
public void menuAboutToShow(IMenuManager mgr) {
contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
// dynamic filling context menu engine
Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
tableViewer.getControl().setMenu(menu);
getSite().registerContextMenu(contextMenu, null);
Additional info: this tap-hold functionally is standard equivalent for right click on tablet device with Windows. I did not do any additional implementation for that. I think it should just work. I have several tables in my application and in all of those this problem appears. Any idea what may be wrong ?
cheers,
Pawel

I have just installed SWT Example on my tablet (from here: https://www.eclipse.org/swt/examples.php#standaloneOutsideEclipse) and this same problem appears on the table example. I think it is general problem/bug. Should I report this as a swt eclipse bug ?

MenuManager in TableViewer does not work on mobile device

Hi
Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP application, and it has to work on mobile device with windows 8 as well (10' tablet with windows . So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
table.setLinesVisible(true);
table.setLayout(myTableLayout);
createColumns(table, layout);
table.setHeaderVisible(true);
tableViewer = new TableViewer(table);
tableViewer.setContentProvider(myContentProvider);
tableViewer.setLabelProvider(myLabelProvider);
MenuManager contextMenu = new MenuManager();
contextMenu.setRemoveAllWhenShown(true);
contextMenu.addMenuListener(new IMenuListener() {
public void menuAboutToShow(IMenuManager mgr) {
contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
// dynamic filling context menu engine
Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
tableViewer.getControl().setMenu(menu);
getSite().registerContextMenu(contextMenu, null);
Any idea what may be wrong ?
cheers,
Pawel

Hi
The "tap-and-hold" is not my functionality. It default SWT Table behaviour on tablet. In windows it self it works like that - to use "right click" you have to do "tap-and-hold". It is just the way it works on tablet I do not have any other application to test it, but I have several tables/tableViever in my application for presenting different results/data, and in all of those this problem appears

WRT330N IP does not Renew Thus all devices get disconnected

Similar Messages

Maybe you are looking for