WRT330N Lan ports stopped working!

Question

Randomly stopped working. tried a hard reset, tried flashing...the wireless works, but the 4 lan ports don't.
Help?

Answer 1

Have you tried to connect the Ethernet Cable Directly from the Modem to the Computer and check if your computer is able to go Online? If its still the same problem, then i think it might be the problem with the Ethernet Card of your Computer.
If it works fine, then again you need to Hardwired your computer to the Router and on your Computer you need to change some settings ....
These settings are for Windows XP OS : 
Click on the Start button >>> Control Panel >> Network Connections >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.. 
These settings are for Vista OS :
Click on the Start button >>> Control Panel >> Network and Sharing center >>Left hand side under task Click on manage wireless network >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK..
Once you are done with these settings, when if it still shows you Cable is Unpluged or its Connected.