WRT350N Busted? Please help!
Hey everyone, figured I'd check in with you guys as I'm having some odd home networking issues. I have a WRT350N hooked up and running both wired and wireless. It's been running fine for months, and we use Comcast as our ISP. Today my father unplugged the router to move it, and it hasn't been working since. It wont allow me online. I can't seem to figure it out. Here is some information. - The PC connects to the internet fine when directly connected to the modem. It also lets me connect just fine when I use my old WRT54G. I don't even have to reboot the PC. - I have tried both power cycling and resetting both the modem and WRT350N multiple times to no avail. - The router is giving me proper IP addresses from outside, giving my PC a proper local IP address, and all DNS information is coming up correct. Still can't connect online. It either hangs or times out. Any ideas? The firmware is up to date on the router, and I have had NO issues until today. Did the router just crap the bed? Thanks for any help guys, I appreciate it.
What is the firmware on the router ?
To compare and check the latest update click here.
For Instructions to upgrade the firmware click here.
After upgrading the firmware, reset the router for 30 seconds when its ON.
Powercycle. Should work. If not I think you'll need to clone the MAC Address of the computer.
Hope that helps
C | EH
linksyshelp.blogspot.com
Similar Messages
-
Don't know the protocol--iPod busted--please help
I'm not sure what the protocol is but I posted a request for assistance and others have since gotten replies, but not to my inquiry
All my songs were transferred to my new computer but will not download to my iPod. It erased the iPod but did not restore any music.
I've updated the software but everytime it says:
The iPod cannot bwe updated. The disk could not be read from or written to.
What do I do? I'm desperate! Plase help.this worked for me:
Cannibal Corpse, "ANYBODY Tried this!!!!****" #4, 05:37pm Oct 26, 2005 CDT -
Please help me for Parameters of the reports in client server mode
Dear reader,
I have a problem,
suppose there is a hierarchy of listings in reports e.g.
countries, states, provinces, districts.
in the parameter if i want to list the districts of the selected
provinces, provinces of the selected states, states of the
selected countries,
then how the code for the parameter must be written. this i am
unable to do as the parameter's select statement does not accept
a bind variable as the WHERE condition.
please help me in integrating the 4 parameters.
thanks in advances. please reply as soon as possible.
thanks & regards.
Bhakti.Dear ileana,
I have tried the the option you have suggested and i was
successful.
Now there is another problem. As i had described the problem, i
have 4 parameters to use in hierarchy. but if i leave any of
them as NULL the report goes bust. i have defined REF cursors
for each of the parameter but cannot use it simultaneously as a
group error occurs.
could you help me out with this too.
thanks in advance.
bye
Bhakti -
Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!
Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">
<!--
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
.description {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Description.jpg);
background-position: center center;
font-family: "Times New Roman";
font-size: 16px;
line-height: 20px;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
padding-right: 20px;
padding-left: 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
.featurebackground {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Features.jpg);
background-position: center center;
font-size: 14px;
font-family: "Times New Roman";
font-style: normal;
font-weight: normal;
line-height: 18px;
background-repeat: no-repeat;
padding-right: 10px;
.policy {
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
font-weight: normal;
color: #000000;
font-style: normal;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Features.jpg);
.number {
.policy {
padding-left: 20px;
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding-top: 10px;
padding-right: 7px;
padding-bottom: 10px;
-->
</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Please read my story because I really need some help...
I've had my Macbook Pro for only a little over a year now but it has already given me tons of problems and headaches. I was very happy when I first got it but over the next few months I noticed strange things with it. For instance, the lid is slightly bent but not so much that it still looks ordinary when closed. I was annoyed with it but I tolerated it since it is not that disruptive. Then dust appeared underneath a small part of the screen, forming a rather conspiscuous, slightly discolored spot. Again I was annoyed but I just went with it. And then after only 5 months after purchase, something related to the hard drive broke. I think the ribbon cable that was connecting it to the motherboard died or something. It was still under warranty so it was easily fixed. A few months passed without incidents. Then a month after its warranty expired, it started to have kernel panics every single day. Most of the time the screen would just become a mass of messed up colors and nothing would respond. Sometimes the screen just went black and then the computer shuts itself down. Other times the computer just freezes with nothing responding and I have to force shut it down. I sent it to an Apple service center and had it diagnosed. The genius said that the hard drive is damaged and needs replacing but other components are still fine. So I bought a new hard drive and had it replaced. For a few weeks, the problem seem to have gone but soon, the kernel panics started again and occurred more frequently. After days of research I finally found out the problem is RAM related. I tested each stick and each slot and concluded that the bottom ram slot was busted. The Apple Service Center offered no help but to replace the motherboard (or logic board). I cannot go with this because I already spent a ton of money in purchasing the computer. I also could not get Apple Care because it is very expensive and I had no ability to spend more. So I resorted to just buying a single 4gb ram stick and tried to live with only one ram slot. I thought that I could finally relax and try to enjoy the computer even with all of its annoyances. But only a few days ago the Wifi just turned itself off and won't turn on. Only after a restart will it start working again. I tried to tolerate it but it keeps turning itself off just minutes after I turn the computer on. I suspect that it might be a hardware problem (again) because the same thing is also happening with my Bootcamp partition; wifi disconnects and will not reconnect. Bluetooth also is not working anymore. I know that this is a vague question but I'm desperate. Is there anything at all that I can do in order to fix all of the problems and prevent all sorts of headaches? I feel that I have tolrated enough and I just can't take it anymore. I want to have it replaced but I do not know how I am going to do that without Applecare (which again is very expensive for someone like me). Please help me. I do not want to go back to normal, less expensive PC's. If this keeps up then I will be forced to do so because it is very expensive to buy another macbook.Sorry to hear about your unfortunate experience but I do not think you can get AppleCare at this point in time.
Can I purchase the AppleCare Protection Plan anytime?
You can purchase the AppleCare Protection Plan anytime within the one-year limited warranty period. Your eligibility for coverage under the AppleCare Protection Plan starts from your hardware purchase date. Apple strongly recommends that you purchase the AppleCare Protection Plan when you purchase your Apple product to maximize the additional benefits provided under the plan.
You will most likely need to try to sell the mac for a parts machine and consider a PC. You may wish to explore Apple refurbished Macs that have a warranty of a1 year.
There are also many sellers of used Macs but since there aren't any extended warranties it is some what risky. -
I can login ok and open some links but unable to open links to other pages within site. I have tried a similar fantasy league of supercoach which has a very similar format and all links on that site work ok. Is this a viral thing or computer issue or site issue? I can access the site via other computers and all ok then. Please help
I saved my driver install file, so I tried reinstalling that, then tried updating to the latest driver for my video card, updating quicktime, uninstalling and installing an older version of quicktime instead, and nothing has worked. I think I'm back to my little red herring. So after some googling, it seemed "cineform.cab" was a Sony Vegas thing (so I had it somehow still living in my files from a couple years back), so I got a disc from my friend who'd made me try Vegas in the first place, and reinstalled. The "cineform.cab" file is back, yet my problem remains. *headdesk* So that part is looking busted as to being my problem.
But I'm back to thinking about that Cineform Neo Scene trial, and it would be a huge coincidence if uninstalling that didn't cause the problem (seeing as I've ruled out almost everything under the sun). And what Neo Scene does is convert mov files to avi for better playback and editing in Premiere, and it installs something that makes those avi files playable in Windows Media Player. And I'm getting weirdness in Premiere with mov files and in Windows Media Player with certain avi files. It *has* to be that that trial unistalled (or installed and didn't remove, but I doubt this since I know all was working smoothly while the trial was still active) something it should not have. Right? Or am I just going crazy here?
I guess it's time to try seeing if Cineform tech support will help me without me buying their product. Like a list of everything their uninstaller kills would be nice. -
Can't convert videos, please help!
Ok, I did'nt get any answers the last time i posted this message, so I'll try again. It would be thankful if anyone answered me.
I have the latest Itunes and an Ipod 30Gb MKII. On my computer I have some music videos and some movies too in the formats .Avi, .Mov and perhaps more. The problem is that when I try to add them into my library in Itunes some won't just add?! And the little bunch of videos that after all do make it into the library won't fit into my Ipod even though I convert them into the proper format with my Itunes. The converted ones says "wrong format" or something. When I choose the setting to manually load my Ipod with videos, the converted videos work on my Ipod, but there's no sound. Why? Please help!Some MPEG files don't seem to take the audio when you do an export from Quicktime player I've noticed, so i have to extract the audio and video seperately and re-mux them using a program call mpeg works, (all on a mac i'm afraid though).
the best way to make sure you get them iPod ready is to use quicktime to export the files using the iPod export setting. I think you need quicktime pro activated ($19 well spent for loads of video stuff). also you might need whatever the PC version of 'flip for mac' which allows avi and other non quicktime content to be played and edited/exported.....
doubt that helps too much though hey!
good luck.
to be fair, video on the ipod is pretty pants anyway i wouldn't bust a gut getting it on there... -
Please help! K8N Neo 2 Platinum instability problems
Hi!
At the fall of last year I bought new computer parts for a new system, the heart of it being a MSI K8N Neo 2 Platinum. Ever since then I have had some instability problems. I tried for a while to fix them, but after a while lost the energy and have just accepted them. Now, however, I want to give this forum a try for help. The instability is irritating and I've been thinking of returning the motherboard.
The system consists of:
MSI K8N Neo 2 Platinum
2 x 512 MB Kingston Hyper X PC3200
AMD Athlon 64 3200+
Gainward Geforce 6600GT AGP
Trust 514DX 5.1 Sound Expert Optical
120 GB Seagate SATA HD
NEC DVD-RW ND 2510A
Zalman ZM400A-APF PSU
Nothing is overclocked. I also have a Terratec TV-card that I never use.
I'm running Windows 2000. I have the latest BIOS, 1.C. I have tried many different Nforce drivers, right now I'm running MEI's nWare Release 06.05a.
The driver for the GPU is 91.28. Every other driver should be the latest there is.
The problem I have is that the system freezes up in Windows now and then. The "funny" thing is that I can run Memtest 86 for a whole day, Windows memory diagnostic all the way trough and I can play games (most of the time) for hours. I have also had the computer doing video compression for days and days, so I would say that it seems kind of rock solid. The freezes seems to happen (I'm guessing) when there is lots of communication going on over the southbridge. It often happens when the HD is working and the CPU perhaps get loaded at the same time, or for example if I'm ripping data from a DVD and starts doing something CPU heavy at the same time. That is an almost guaranteed recipe for freezing. Sometimes it freezes when I'm doing "nothing", but I guess it might also be when Windows is swapping, or something.
I remember reading about problems like this before, with other motherboards. I'm thinking that perhaps some BIOS latency thing could fix it. Perhaps a hacked/tweaked BIOS? Or is the motherboard in fact busted and needs to be returned?
Any thoughts, ideas or tips are welcome. Please help!
Thanks in advance!
. . . I'd half to agree 100% on what BAS is pointing out . . . . . . . .
........also, for kakarocht's reply for the matter as well....
.....{ my opinion = 450w at least of a PSU, and, >>> what BAS is stating about's the 12v line, YES, BIG requirement for your system's _ component's of } .......
mr. Charles
. -
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
Apple Mini DVI to Video Adapter is not working. Please Help...
I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...
Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko -
PSE icons instead of the photo. I need to view photos at a glance. Please help me????
Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
LeicaHi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian -
Error Log during logon of RAR 5.3 Portal - please help
Hi Experts,
We are unable to login into the CC portal [GRC RAR 5.3]. The login screen is appearing again and again without logging into the CC portal
Below is the log file which we are getting and we understand that the product is not responding properly to the application
Can somebody please help us in resolving this at the earliest
Thanks in Advance
Best Regagards,
Srihari.K
Date : 12/05/2008
Time : 2:38:16:008
Message : Exception of type com.sap.sql.log.OpenSQLException caught: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?"..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Severity : Error
Category : /System/Database/sql/jdbc/common
Location : com.sap.sql.jdbc.common.CommonPreparedStatement
Application : sap.com/tcwddispwda
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 1666450:/apps/usr/sap/HLG/JC00/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BAF96A51006E0000001F0000265200045D4A46588084
Source Name : com.sap.sql.jdbc.common.CommonPreparedStatement
Argument Objs : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Arguments : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Dsr Component : n/a
Dsr Transaction : d2d9c100c2b811dd9eb60003baf96a51
Dsr User :
Indent : 0
Level : 0
Message Code : com.sap.sql_0019
Message Type : 1
Relatives : /System/Database/sql/jdbc/common
Resource Bundlename :
Session : 92
Source : com.sap.sql.jdbc.common.CommonPreparedStatement
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : ac_adminHi,
The shear length of your post is frightening - this would keep many potential replies away !!
What i woudl recommend is --> Open an OSS messgae ! This would resolve your problem !!
Thanks -
Lock-Ups and Freezes PLEASE HELP
Hello everyone..
I come here to see if anyone can help me... Ive done it all and nothing is working.
I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
My computer specs are
300watt PSU Enermax True Power
MSI K7n2 nforce2 8xagp mobo
athon 1700xp
512mb of Kingmax DDR 2700
SB audigy x-gamer sound card
MSI geforce4 ti 4200 8xAGP graphics card
Hope thats enough..
One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-07-19 01:30:24
TimeZone: 300 - Eastern Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverFileVersion: 6.13.10.3100
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverProductVersion: 6.13.10.3100
Hope this helps, i dont understand what it means so maybe one of you might...
Please help me on this... Ive tried everything i can...
Thanks in advanceIf what you are saying, and I am reading correctly:
The machine and game was working just peachy and all of a sudden the problem manifested itself?
Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
First things first, try a memory testing software like memtest86 to see if you get any errors.
http://www.memtest86.com/ -
My app store wont let me download apps, says they are not available in the uk please help??
my app store wont let me download apps, says there not available in the uk?? please help??
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry
If it says your billing info is wrong that means that your credit card issuer is refusing to approve your account. You will have to solve the problem with your bank or credit card company.
-
I bought a iphone 3g from a friend and i dont know how to update ios 5 and 6 because i dont have the setting in my phone and it wont let me download any apps tell i have it updated. someone please help?
You don't the highest IOS for a 3G phone is 4.2.1 you can't get the lastest IOS.
Maybe you are looking for
-
When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages. When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any
-
ITunes thinks songs are missing when they are NOT...
I've written about this in the past and I thought I had fixed it manually. For some reason a large number of my songs (about 1300) in iTunes are not able to be found on the drive when I try to play them. Once I try to play them I get an error message
-
What brand of RAM do you recommend with this board?
Hey guys! I wanted to know if any of you guys could recommend RAM that would be good for this system. I am running a custom water cooling kit so I am planning of pushing the processor to 4ghz+. The problem I have right now is that I cant get the RA
-
Custom tag names in Awesome WM?
How do I create custom tag names in the Awesome WM?
-
I have a Toshiba Sattelite A 300 notebook and recently it start heating. I mean really heating, if you keep it on your feet it can get you burns, any thoughts what can be my problem? HowToLounge