WRT350N Cannot Find File Problem

Hey Guys,
I'm new to this forum and I am having a problem with my router and the usb drive. I currently have a 250gb WD Mybook hooked up to the wrt350n and i created the partition in the gui of the router. I created a share and set up the permissions, but when i try to drag a file into the folder that I am sharing on the drive, it says "Could not find this item" it does it with every file I try to copy over. The file system is fat32. It doesn't matter the size of the file or extension. I am currently on Windows Vista Ultimate and I also tried the method where you switch the setting in local security policy Network Security LAN Manager authentication level to Send LM & NTLM –use NTLMv2 session security if negotiated and still no luck Its driving me crazy. Any help would be appreciated.
Thanks

I don’t see any reason why it do that if you have created proper shares and also assigned proper rights to it. I would suggest you to upgrade or re-flash the latest firmware on this NSLU2, reset it and reconfigure it. Let me know if it works.

Similar Messages

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

Cannot find file #01, do you want to search?"

We recorded a song yesterday and saved it as properly as the other sessions we also recorded. Today I want to open it, but it always says "Cannot find file #01, do you want to search?" But I've got the problem only with one file, the other songs are ok.
The odd thing is: the file is there, also the tracks in the file and the recordings in the tracks appear. But the music inside the recordings is gone. Also the media file is empty. I'm quite desperate and my band will kill me. Can anybody help?

Did you move the songs to the current folder AFTER you added them to iTunes? Sounds like you did. Big mistake. You may just have to delete you library and re-import them from the current folder. Once you've done that, leave the files where they are. iTunes can't track where you're moving your music to from one place to the next.

I photo freezes under 'cannot find file'

When I open iphoto it works fine for a few seconds but then it freezes and says 'cannot find file .........'
I then have to force quit because it says it's 'not responding'
I don't know why the files have gone from iphoto because I can still find them if I search for them and they seem to be in the correct place.
For the moment I cannot use iphoto at all so please help!
Thanks
Chloe

Chloe
When it says that it cannot find a file, does it mention the file types?
Some other things to try:
Rebuild the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

"cannot find file" after formatting and moving!!

Wanted to have iTunes library included in Time Capsule backup. So had to reformat external hardrives where all my songs are from Windows do OS. Copied everything on other HD, reformatted HD with OS, copied back all songs. HD still has same name "MUSIC", but iTunes cannot find files.
Changed in iTunes preferences the location of files to ensure it searches in the right place AND also replaced with text editor in "iTunes Music Library.xml" file all links with new address of HD (now after reformatting to OS I found it to be slightly different despite still same name).
But iTunes still cannot find the files. Everything is the same as before, HD name, directory structure, file names, etc. ONLY difference is it all is on "OS formatted" drive. Don't want to lose ratings and playlists of over 15,000 songs....is there still a solution?

The moment I "drag out" the Tunes Library File, then there is nothing left there, and when I open iTunes it is empty.
That's as expected. That file is the database iTunes uses that keeps track of everything, so when you then launch iTunes, it's starting from scratch.
I can import the Playlists from the XML and they do appear, but still no songs, all is empty. If I try to reimport from the new location, then they "do not fit into the playlists", meaning ratings etc. are lost.
Then you apparently didn't get the XML file edited properly; it's not easy to do.
Why does the simple location function in iTunes Preferences not work?
It does, when used as designed. The preference is where new additions (imports & purchases) will be stored. It does not change the location for existing files.
Put the original library file back. Then launch iTunes, Get Info on a representative track, and look at the path to where it thinks the files should be and compare that to the actual path. Any difference at all will break things. If there are differences (drive name slightly different, any difference in folder names/structure, etc.; letter case counts), try correcting them in Finder and see if that gets things working again. If not, then you'll have to use the Add to Library command to get back your tracks which will lose all your ratings, etc.
Where does iTunes save the links to the original files so it can simply be changed?
In the iTunes Library file, which cannot be manually edited.

Cannot sync photos-says cannot find file, will not sync

eveytime I try to sync, when it gets to photos, iTunes has an error window with no code that says "Cannot find file, cannot sync" Everthing else backs up and syncs except photos. My husband uses the same mac and he can sync just fine, no errors.

For iPhoto the link said:
If you're syncing from an iPhoto or Aperture album, use these steps to find the iPod Photo Cache folder in the default iPhoto Library or Aperture Library location:
From the Finder, choose Home from the Go menu.
Once there, open the Pictures folder and locate the iPhoto Library file. (For Aperture, this is called Aperture Library.) If you have moved your iPhoto Library or Aperture Library to a different location, go to that location in Finder first.
Control-click the iPhoto Library or Aperture Library file and choose Show Package Contents from the shortcut menu.
In the next window, locate the iPod Photo Cache folder and drag it to the Trash. Important: Do not remove or modify any other file within the library package. Removing or modifying other files may cause data loss.
Close the Finder window.
Are you doing step 3? You can also right click and select Show Package Contents. It works both ways for me. I just tried it.

Video download from SD card 2 iPad 2 interrupted, file corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

None of the links in my TOC or INDEX work. Cannot find file is the error message.

The files are on a networked drive. Win7. FM 8. I've renamed files. Regenerated. Created a new book. Nothing works.
I do have hyphens and underscores in the file names but no other special characters.
Need help urgently.
The error message is:
Cannot find file named
\SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.
fm.
Make sure that the file exists.
Note that the TOC and INDEX are listed in the book w/o a path while the body chapter has the entire path (above) listed in the book view.
Thanks

IIRC, FM8 had an issue with a path having more than 5 (or 6?) sub-folders. Try bringing the files up a few levels or create a mapped network drive down to the lower levels.

Windows cannot find (null) problem - firefox wont start? help!

ive just got a 'windows cannot find (null)' problem when staritng Firefox; being using it for years no problem but cannot open it now. tried removing and reinstalling, still get the message.
any ideas what I can do??
== This happened ==
Every time Firefox opened
== 20 June 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB0.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Yesterday after posting my problem I consulted a computer programmer. He advised me to follow the pathway C:\\users|richard\....... from Explorer to the extension and delete it. Worst case scenario would be to uninstall and reinstall Firefox. I deleted it and the unresponsive script and warning disappeared without any other complications.

HT1329 I cannot find file itunes64.msi

I cannot find file itunes64.msi so cannot update my software. What can I do as new versions will not download and I cannot remove itunes software as the .msi file is needed

I did this in Windows 8.
Go to Regedit -> Edit -> Find -> Type Itunes64.msi -> Find Next ->
On the left side, There are a lot of folders, find the only open one named "SourceList", go to 1 folder above that, so it should the main folder of the source lest -> Right Click -> Delete -> OK
Now you're ready to install your latest itunest. just close the RegEdit and install itunes64
I just did this 10 minutes ago, hope it helps

System cannot find file specified during install officejet 6500

I started my HP solution center software today to do some scanning over my wireless connection. I received a message box indicating I needed to reinstall the original software that came with my OfficeJet 6500 wireless 709n printer. when I started the software it recieved the message 'system cannot find file specified'. No information was given on what file it was looking for. I then downloaded the software from the HP site (OJ_AIO_6500_E709_Full_Win_WW_140_408.exe) and encountered the same result. I hookup up my printer via USB and it appeared to go looking for driver updates. After that the HP solution center software would run but would only connect to my printer if the USB was connected. Still cannot run the printer software set.
I recently upgraded my windows 8 64-bit to window 8.1. It worked before that. This is not the only software that was broken by the process. Any help on how I can re-establish my wireless connection to my Officejet 6500 would be appreciated.
I also tried the Microsoft 'Fixit' solutions but they are not available for windows 8.1 :-)...

Hello All,
Try using the scrubber built into the CD or download.
From original CD installation:
1. Insert CD into drive, and then cancel the installer.
2. Open "Computer", and then right click on the CD drive and choose open.
3. Open folder Util
4. Open folder CCC
5. Run the L3uninstall.exe (near the bottom of the list).
6. When the uninstall has completed restart the computer
7. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
8. Restart the computer.
9. Download and run the HP Printer Install Wizard.
10. When it comes to the screen asking to accept the terms, don't yet. There will be a few options near the top of the Window. I need you to choose "Connection settings" or "Internet connection usage settings" (It will be something similar to what I just stated). It will give you the options to turn off automatic updates, I will need you to change all of these options to "Off" / "No".
11. Once they're set to "Off" / "No", continue with the installation like you did before.
If software was downloaded and extracted to your system:
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. Run the L3uninstall.exe (near the bottom of the list).
6. When the uninstall has completed restart the computer
7. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
8. Restart the computer.
9. Download and run the HP Printer Install Wizard.
10. When it comes to the screen asking to accept the terms, don't yet. There will be a few options near the top of the Window. I need you to choose "Connection settings" or "Internet connection usage settings" (It will be something similar to what I just stated). It will give you the options to turn off automatic updates, I will need you to change all of these options to "Off" / "No".
11. Once they're set to "Off" / "No", continue with the installation like you did before.
Also, make sure all of the Windows Updates have been completed.
Let me know if this works.
Thank you,
I worked on behalf of HP.

Version XI Cannot Find File USING VBA Shell Command

I open Adobe Reader from an Access VBA Shell command. After upgrading to Version 11, the Reader opens but I get the Error Message. "Cannot Find File".
This was on a Windows 7 Machine running MS Access 2012. I had an older PX with XP and Access 2003 on it, so I ran the program on it with Version 10 and the Reader opened with the
file passed to it using the Shell command. I updated Adobe Reader to XI on the XP machine and I got the "Cannot Find File" message. I went back to the Widows 7 machine anbd removed Version 11 and reinstalled Version 10 and the Shell command worked like it did before. Does anyone know if there is a work a round for the Version 11 error as I have many many customers that may update to Version 11 and my program is not going to work for this particular function.
Appreciate any help, thanks.

Q1 Answer
I use Shell because it has worked for years and it is a build in VBA function and ShellExecute uses Windows API, and I took the easy route.
As I'm sure you know Shell is for exe, com or bat files and ShellExecute enables
the opening of files such as txt, pdf... etc by file association.
Q2 Answer
The exact string is
"C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe" C:\FoxFales Data\FoxFalesStaff\Alerts\GenericSupplies.pdf
The path for AcroRd32.exe is retreived by reading the registry entry "HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe\"
Q3 Answer
If you paste the above command in the CMD shell you get the same result. Reader Opens, but opens with
the message "Cannot Find File".
Newest Results
In the forum I found threads that indicated that if in Security (Enhanced) you had "Enable Protected Mode At Startup"
enabled there were some unpleasant results.
So I turned it off and lo and behold Reader XI with the Shell commandfrom VBA works!
But as a matter of interest I turned it back on and tried the API call ShellExecute, as you so politely suggested,
and...IT WORKED with "Enable Protected mode At Startup" enabled.
I don't understand why Reader XI lets ShellExecute work and not Shell, but I'm happy I have a solution
Thanks for you help

Help. My ITunes library content vanished. Cannot find files anywhere .

Help. My ITunes library content has vanished. Cannot find files anywhere . Still accessing store via my phone and all my purchases are there etc but on my laptop the library is empty.. I have AVG and have put Itunes as exception as read that might be an issue. Im really not sure what to do .

Hi sooz180,
Welcome to the Apple Support Communities! I understand you can see all of your purchased music on your iPhone but the library on your computer in iTunes is empty. If the music was purchased from iTunes you can get this music back to your iTunes Library two different ways. You can either transfer purchases from the iPhone to the iTunes Library, or you can just download the music again from the Purchased section of iTunes. I will post the information on both ways to recover your purchased music below.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Download past purchases
http://support.apple.com/kb/HT2519
I hope this helps,
-Joe

X200: Windows cannot find file error (& cygwin problem)

Often (about half the time) when I double click an icon (.docx files typically) to open I get a error reading"Windows cannot find ‘C\Users\username\Desktop\filename.docx’. Make sure you typed the name correctly, and then try again." I can *always* resolve this by simply double clicking again. I ran a complete disk check (the thing that runs on reboot) and it passed with no errors. OS: Vista with all updates, Apps: Office 2007 with all updates. Disk: Solid state (128GB) SAMSUNG MMCQE28G8MUP-0VA
Any suggestions for troubleshooting tips?
I also wonder if this might be related to the following problem. I have CYGWIN installed, and once I have changed a file in emacs and saved it, emacs can no longer find it (no matter what I do). These days I get the message within emacs "file is not readable", although in the past the error has said something about a fork.
Message Edited by andy402 on 04-25-2009 07:27 PM

There is a primitive called 'Request Deallocation' that is suppose to free up resources in a VI after it is called. You could try using this.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Problem extracting Acrobat XI setup.exe file - using WinRAR extractor - "Windows cannot find file...

I have downloaded Adobe Acrobat XI from my university download site (so I know it's a legit, safe copy). When I run the .exe file, even as an administrator, it begins to extract using WinRAR self-extracting archive and stops with a pop-up error:
"Windows cannot find "C:\Users\UserName\AppData\Local\Temp\RarSFX0\Adobe Acrobat XI\setup.exe"
I scanned using Malwarebytes, AVG, Spybot, and ran a \scannow command. Nothing finds a corrupt file. Any ideas what could be causing the extractor to not work?
I am running Windows 7 on a 64-bit Dell laptop.

SOLUITION - I had to actually download a version of WinRAR extractor. Right click the downloaded AcrobatXI-Windows.exe file and choose "Open with WinRAR" (this option was not available until I downloaded the WinRAR application - apparently the extractor runs automatically but doesn't have full funtionality). Then I nagivated to the Adobe Acrobat folder in the WinRAR window and selected the setup.exe file to run. It opened and installed beautifully.

WRT350N Cannot Find File Problem

Similar Messages

Maybe you are looking for