WRT350n firmware and version info
hey guys i noticed that the canadian site shows a different firmware for my router 103.2 and the USA site shows 103.7 is it safe to use the usa firmware as its newer.
also when i look under my router for the version info it just shows the model WRT350N does this mean it a Version 1
if you're not seeing any version # beside the model underneath the device then yes it's version 1
Similar Messages
-
I reinstalled I-Tunes several weeks ago. I can no longer burn MP3 Disk with Song/Artist info onto disc. It comes up as No Artist/No Title on car CD unit. Old MP3 Disk previously recorded still show all info. Sometimes only every 3rd song is on the MP3 CD. On Audio Disc there is no change and all info still shows up. The new I-Tunes version has the "cloud" on it if that could make a difference. In the select Burn CD mode I can select testing and add song info for Audio Disk but it shows shadowed out for MP3/Data. I added and removed ID tagging from my list to see if that made a difference but it didn't.
Any Thoughts?
JimThis may help. Audio files are actaully in the DATA folder. These can be editted with Soundbooth then they must be imported intot the specific slide in the Powerpoint presentation. Publish the presentation (as you'll read below) and *should* work This reply came from robva65 [email protected]
Let's try this: *Publish* the PPT deck you have. What you'll end up with is a set of files and folders, but I want you to look for the *data folder* that's created as a result of the publishing process. (Unless you specify where you're publishing to, Presenter will publish to a directory called "My Adobe Presentations" by default, so you may have to look there on your harddrive) Inside the data folder will be a list of mp3 files, which, if everything goes smoothly, should make it much, much easier to see which audio is used by a specific slide.
Here's what I mean: for example, after publishing, I have a data folder and inside I found the following file: a24x9x3.mp3 As I double click the mp3 file (which causes it to play using Windows Media on my laptop), I can hear that it corresponds to my slide 9 in my PPT deck. And there's corresponding mp3 files for each and every slide I have in my deck. I'm clicking another file (wouldn't it be nice to see what I'm doing???) a24x20x3.mp3, and that file corresponds to my slide 20 content in PowerPoint.
So again, give publishing in PowerPoint a shot and see if that makes it any easier. Well...not nearly as easy as recording in Audition/Soundbooth/Audacity, but it's close enough to hopefully dig you out of that hole you're in now.
Hope this helps ~rich -
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier. -
How to retrieve version and encoding info from SAX parser
I want to have access to the version and encoding info in a parsed XML document (when using SAX2). Who knows how this works?
If not possible with SAX2, what other solutions are there?
Second question: how to retrieve comments in XML files?
Thanks in advance!thanks for answering, but ...
LexicalHandler is fine for retrieving the comments,
but does not give me the encoding (specified by
encoding="UTF-8") and version (specified by
version="1.0").
I am feeding my parser with a byte stream, the parser
resolves the correct encoding and i want to have
access to this value!!hi , It is unlikely that you will get the encoding and version . This is being addressed by the DOM level3
, see
http://www-106.ibm.com/developerworks/xml/library/x-dom3.html?dwzone=xml . -
How to fine the oracle version and bit info?
I just want to find out the
Oracle version
Bit info (32 or 64....)
and other system configuration about oracle
Please helpDuplicate post:
how to fine the oracle version and bit info? -
CURRENT Bluetooth Firmware and Software Version Listings
OK, I'm hoping there is someone out there that can provide me with what should be a relatively simple answer. My current machine is an iMac G5 1.8GHz. (Non-iSight), 2GB RAM, and 1TB hard disk running OS X 10.4.11
I'm curious to know what the current, up--to-date version listings should be for both the bluetooth software as well as the bluetooth firmware as displayed under "Bluetooth" in the System Profiler when selecting "About This Mac".
I've been experiencing some bluetooth "weirdness" lately and before I provide any additional information as to the exact problem, I'd like to know if the firmware and software versions are up-to-date first.
Apple doesn't seem to provide a chart to check against (unless I missed it), and other's on the forum have explained that those specs are "model-specific", making it a bit tricky. to determine. So that's why I listed my machine in hopes that someone can tell me what versions should be appearing.
Thanks in advance!
Ed M.your phone is clearly hacked (jailbroken). Not only have you voided your warranty with Apple, but you have forfeited your ability to receive any assistance from Apple, including from this forum. Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll need to search elsewhere for solutions to your problem. Be prepared for the possibility that you have PERMANENTLY disabled your iPhone. -
Modern firmware and software version not matching
Hi...I upgraded my software version to 5.0.1 and didn't upgrade the baseband. My current baseband is 2.10.04. Would this cause problems? I didn't update the firmware due to turbo issues.
Recently I'm having some problems of 'NO SIM CARD INSTALLED'. Does unmatching of firmware and software version have to do with this ?your phone is clearly hacked (jailbroken). Not only have you voided your warranty with Apple, but you have forfeited your ability to receive any assistance from Apple, including from this forum. Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll need to search elsewhere for solutions to your problem. Be prepared for the possibility that you have PERMANENTLY disabled your iPhone. -
Website Blocking? WRT350N Firmware Version: v1.03.7
I am trying to block a few websites through the router, but no matter what I put in, it will not block anything. Any particular reason why. I have other Linksys routers that work just fine, but this model will not work for me. The USB hard drive like this not work either. Any suggestions on either.
Download Firmware 6.27 MB...This is the same firmware you already have on your router...
I would suggest you to flash the router's firmware and reset it and re-configure it...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...See if that makes any difference...
NOTE : Make sure no USB Drive is connecting while upgrading or resetting the router... -
Hello, I am new and as far as I searched this forum, I still havent found any info about latest firmware and its updates
Anyone can give me some link or something where I can see what is new in the latest update?
I am sorry if I was blind, but at least I tried to find something
Thanks
EDIT: Thats meant to be for Nokia N80 Message Edited by ikey on 25-Apr-200701:34 AM25-Apr-200701:31 AM
ikey wrote:
Hello, I am new and as far as I searched this forum, I still havent found any info about latest firmware and its updates
Anyone can give me some link or something where I can see what is new in the latest update?
I am sorry if I was blind, but at least I tried to find something
Thanks
Well, the latest N80 Firm. is 4.0707.0.7 but it's craap. It contains a looooot of bugs u can find the bugs discussed here.
Seriously, I do not recommend updating to this version trust me i have an N80 too..Message Edited by tekso on 25-Apr-200701:38 AM
www.symbiano-tek.com -
I just bought a WRT350N, and my network computers would not appear in 'my network places'.
I removed the apostrophe's in each computer's name - and the computers appeared on the network. Unfortunately, I was not able to remove the apostrophe on my Mac.
There is a well-documented bug in Samba 3.0.x that causes computers with apostrophe's in their computer name to not be recognized. The WRT350N firmware is an embedded linux kernel with a version of samba that contains this bug.
CISCO/LINKSYS - PLEASE UPDATE YOUR FIRMWARE AND CORRECT THIS PROBLEM!!!What is your OS? I'm using WinXP and I can't even change my computer's name to a name with an apostrophe.
-
WRT350N: Firmware 1.04.3 (Apr 11, 2008)
Hi,
I just purchased WRT350N, configured and check that all is well. However, I noticed that the firmware version reported is 1.04.3 dated on April 11, 2008. This version of firmware is not listed in the Linksys support web site. I want to know :
1) where can I find release note on this version
2) whether this is an officially supported version
3) can I revert the firmware version to 1.03.x listed on the web site (especially if answer to Q2 is a no).
ThanksWell the firmware provided to you have on the Router is the Latest one so you will not find any release note of the Latest firmware. There is no point Degrading the firmware of the Router as everything is working fine with the Router.
-
How to sync the album and track info that I entered into a CD using iTunes with the actual disc?
Hello,
I recently recorded some cover songs, and I imported them into iTunes. So, after entering the track info (track names and album art) into each track using "Get Info", I burned them to a CD. I was completely shocked that the track info and album artwork did not get inputted onto the CD. So, I entered the track info, but could not add the album artwork.
How to add the album artwork is not as important a question. But it's one of my 2.75 questions.
My other issue is that the info that I put on the CD using iTunes is only visible within iTunes. Therefore, I cannot get the track names elsewhere.
My 2.5 questions are:
1) How do I get the track and album info to display in Windows Explorer and Windows Media Player (and the touchscreen CD Player in the car)?
2) How do I add digital album artwork to the CD (so that it shows on the touchscreen CD Player in the car - if iPods have the artwork and it shows on the car's screen, a CD should be able to show the artwork on the car's screen, when talking about limitations of the car)
2.5) How do I make that artwork display across everywhere I plug that disc into?
2.75) How do I ensure that when others import my CD, my artwork, track names, and album name also import from the CD?
I have already burnt the CD, so I would prefer a way to tweak the properties of the already burnt CD rather than burning a whole new disc.
Thank you!
-Royce1) Metadata visibility in Windows Explorer and/or Windows Media Player depends on OS version and file type. The mp3 format has the widest support. As for the touchscreen CD Player in your car who can say? If it can play data discs the results will be better than with audio CD. If it can display CD text then this option should be selected when creating an audio CD.
2) Artwork cannot be attached to the tracks on an audio CD. If your car system supports it all then it will be with data discs. Check the specifications of the system for the media types it can support on a data disc.
2.5) Simply ensure the artwork is embedded in the tag.
I have two scripts that can help with this, CreateFolderArt and EmbedFolderArt.
The scripts have a slightly different purpose.
CreateFolderArt ensures that every album folder ends up with a Folder.jpg image which is the art that iTunes already knows about. Side effects are that if artwork has been updated in iTunes the folder art should be updated also, and if any track from the album doesn't have embedded artwork it gets embedded.
EmbedFolderArt was actually written for someone who already had various artwork images stored in the folders and wanted them added to their tracks, but not if iTunes had already downloaded a better quality image.
2.75) Again, use a data disc format. Note that you should not be giving away copies of copyrighted material.
Audio CDs are finalized, you cannot change any properties of them unless they are on rewritable media in which case you can erase the whole disc and start over.
tt2 -
ITunes 11.0.2.26 stops working when I try and Get Info
Hi, I've never asked a question here before, so bare with me if I give all the wrong information or something...
Recently, I'd been having trouble getting my iPod Touch 3rd gen 64 gb to sync with my iTunes Library. It would sync all my old music but any new music I added was completely ignored. In a last stich effort to fix this problem without having to resort to resetting my iTouch, I decided to update my itunes. I now have the iTunes version 11.0.2.26 and everything seemed to be working fine. My ipod syncs old and new music and all my information is still in tact.
However.
With this new version of iTunes, every single time I try and change a song's information via the "Get Info" button, iTunes suddenly stops working and closes before I've even been able to see the information. A Microsoft Windows window pops up and says,
"Itunes has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution
is available."
This is a screenshot of what pops up when I click and Get Info: http://25.media.tumblr.com/1d3334a0bf5f0a7308b28f4565ff02a6/tumblr_mit8vzNS1E1ro wvqao1_500.jpg
I have a Microsoft Windows Vista
ACPI x86-based PC, driver version: 6.0.6002.18005
465 GB capacity, with only 248 GB being used
As I said before I have a 64 GB Generation iTouch 3rd Gen, and a version 11.0.2.26 iTunes. Windows informs me that all of my drivers are up-to-date and there are no current updates available.
I've tried running my iTunes in safe mode and that didn't help, and I've also tried uninstalling and then reinstalling itunes. I really don't know what else to do other than try that "Create Another User and test" thing. I am really not that well-versed in computers and diagnostics, so I'm hopping I won't have to get elbows deep in the inner files of my iTunes to try and fish out some plug-in or another. Nothing else seems to be wrong. I can sync and add music and create playlists and purchase music. I just cannot edit Get Info without my iTunes crashing.
Should I try and download the old version of iTunes again and just reset my iTouch?
http://www.oldapps.com/itunes.php?old_itunes=6704First I would try this
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Next remove the Apple software using the instruction above and install a previous version. You can Google to find the previous versions -
Itunes erased all the album and artist info when reloading library!!!
My problem is a big one. I've got 8600+ songs (800+ albums) on my hard drive. These are all from physical CDs; I ripped them in wav, then converted them to mp3. When I did this, I kept both the wav AND mp3 files in each respective album folder; about 400G of wav and 80G of mp3.
OK, so a couple weeks ago I got hit with a virus. It messed up my XP OS to the point where I needed to do a reformat and reinstall. All of my music files are on an external hard drive, so no big deal there. I finish the reinstall, re-download itunes, and tell it where to find my music, and to import it into the library.
This is where things go horribly wrong. Itunes imports all the mp3 files in as separate folders/albums, just like before, with all the track and artist info intact. However, for some reason, it took all the wav files and dumped them into one giant Unknown Artist/Unknown Album folder. In doing so, it appears to have stripped the artist AND album info from every single one of the 8600+ tracks! I don't know why it did this, as the wav files in the itunes folder all had the exact same track info as the mp3s.
My question now is: is there any way I can get this info BACK, any program that can look at the individual tracks and figure out what artist and album they go with? Or is there something within itunes that can do it that I haven't found yet? There's no way I can go through and do this track by track; I can't even begin to calculate how long that'd take. My only OTHER option would be to re-rip all the CDs, but again, that took months the first time and I don't want to do it again. However, these files are pretty much useless as they are, in a giant pile that seems only to be organized by the songs' respective track numbers.
I am screaming HELP in capital letters here. Even if I could find a program or solution that would find MOST of the tracks' info, I'd be happy. I'd also be interested in knowing why itunes did this in the first place, for future reference.
And just to head off one solution I expect to be offered, no, I did not have the files backed up anywhere else; reimporting an un-reorganized version of the library isn't an option. I had just finished ripping them and hadn't picked up a second hard drive yet. I know, first thing I should have done.
In any event, any help would be appreciated. Please feel free to email me. Thanks.I just remembered some older posts talking about some software from musicbrainz.org.
It might be able to make some sense out of all those WAV files, if you decide to spend the time on it. Honestly I'd prefer to rip my CDs than go through something like that, because I'm a control freak and would not trust the program to really find the right info....but that's just me. It might be easy to set up and a snap to use, for all I know.
http://forums.musicbrainz.org/viewtopic.php?id=1730 -
How can I get a list of locations with address and contact info?
In Adobe Story Plus, I've gone through the effort of entering address and contact info for all locations. I would like to now use this information.
When I choose Sets and Locations, I get the set names only, separated by Studio and Location. No locations, no addresses.
When I choose to export the Set List as XML, I get an XML file that seem to contain the address information. However, it does not appear to be a valid XML file, readable neither in Excel nor Google Docs.
Are there reports that I can create that include this information? Is there a useful way to export XML and open in Excel/Number/Google Docs/Word, etc?
I'm about to embark on a search to how the XML can be formatted properly but this isn't really where I wanted to be spending my time on this project.
Thanks.Yes. I tried it on Windows version.
Would you mind doing the following steps to view that XML file as a table in Safari? Then from safari, you can copy paste it Excel.
1. Export the Set List XML from Story.
2. Extract the 'transformSetListIntoTable.xsl' file from the attached zip file and place it in the same directory in which Set List XML is present.
3. Open the Set List xml file in a text editor and paste the following text at its very beginning.
<?xml-stylesheet type="text/xsl" href="transformSetListIntoTable.xsl"?>
4. Save the changes.
5. Open the Set List xml file in Safari
6. In Safari, Select All and paste it inside Excel.
Maybe you are looking for
-
Stocks Won't Turn off in the Notification Center
I got an iPhone 5s yesterday. I don't want the stocks to display in the notification center so I turned them off (made sure the stocks button was unchecked). I also turned them off in the background app refresh area under Settings > General. The stoc
-
i updated my ipad mini to IOS7 and now before i begin it asks for a 4 digit passcode i was never prompted to set one up durring download now i am locked out
-
Anyone else having issues recently with DDX calls that seem to return corrupted text from recent PDF files. Coincidentally, Firefox 26 renders the same same document incorrectly. AFC
-
In Design crashing when placing text
I'm creating a book of essays related to my workplace. I created a table of contents, preface page and placed the initial essay (all from Microsoft Word) with absolutely no problems. When I went to place the second essay on a subsequent page of the d
-
Need FM or Tables to see Process Chain scheduled(future) date and time
Hello Gurus! Can anybody tell me where/How i can get the Process Chain scheduled(future) date and time..? I mean, I want to see at what date and time is the PC scheduled for tomarrow/next month etc... Like TBTCO-SDLSTRTDT / TBTCO-SDLSTRTT