WRT350n Firmware Update 1.03.7 - Web page load really slow after update

Well I updated my WRT350N with the new firmware, but now web pages load very slowly, and streaming video is even slower. Before the update it was blazing fast. I run a mixed network of wireless N and G. Both Wireless N connections connect at 200 or higher Mbps now, which is a great improvement.
Anybody got any ideas why web pages and steaming video run so slow now.
Also downloading files never goes above 30 kb/sec now.
I use comcast cable and downloads were so fast before.
Thanks in advance.

check the download speed and the streaming video when the computer is directly connected to the modem

Similar Messages

Why is my ipad2 really slow after updating to IOS 6.1.2

Why is my ipad2 really slow after updating to IOS 6.1.2

Try this.
Quit all apps completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Apply the combo update
http://support.apple.com/kb/DL1640

Guest Portal web page load is slow and timesout on occasions

Hi All,
I'm hitting a rather unusual issue with our Guest WLAN users. Firstly let me describe the topology:-
2 x 5508 WLC controllers one Foreign and one Anchor. Mobility tunnel between the two WLC's as the Guest WLAN is on the WLC sitting in the DMZ.
30+ 2702i AP's running in FlexConnect mode for Dot1X WLAN and Central Switching for Guest WLAN.
Cisco ISE 1.3 acting as Radius server and providing Authentication and Authorisation policies.
Dot1x Authentication and Authorisation works fine with Dynamic VLAN assignment based on AD memberships.
The issue is with the Guest WLAN is that from a security perspective we weren't allowed to use the Central Web Authentication using L2 MAC filtering with the L3 Security of None as described in Cisco Document: 115732.
So the Guest WLAN has been set up with no L2 security and the L3 Security of Web Policy with Web Authentication to External Server i.e. Cisco ISE and RADIUS override on the Advanced tab of the Guest WLAN.
So a client connects to the Guest WLAN SSID > receives the DHCP IP address hosted by the Anchor WLC and then one opens a browser types in the URL and the Security message is presented > Continue to this website (not recommended) selected and the process of receiving the Web Redirect Sign On Web page begins and hangs around forever.
Depending on the Client i.e. Apple IPAD the sign on page loads correctly although can be slow to start with but a successful login is completed, but with windows clients and MAC Air books there is an issue with the browser either timing out the page and a retry is necessary or we can't move beyond the following page - https://x.x.x.x:8443/portal /PortalSetup.action?portal=194a5780-5e4e-11e4-b905-005056bf2f0a?switch_url=https://1.1.1.1/login.html&client mac=00:23:4e:86:98:3c&wlan=GUEST&redirect=www.cisco.com/
Any suggestions would be really appreciated with this as it's creating a lot of frustration.
Thanks in advance.
Regards,
Mark

Hi Mark,
Yes Guest Cert will need to be external. Because Guest Users if they have a non-corporate laptop for example will not have your Internal Company Certs installed in their browser (that you loaded onto ISE), so they cannot trust your internal Cert.
If your open Firefox or IE under Options/Security View Certificates you will see a list, if its a Guest you will see well known public Certs like Geotrust, Verisign etc.
For my setup I brought a GeoTrust cert and loaded this into ISE, this way Guests will always Trust the Geostrust ISE cert like https://guest.com for example and the login will appear and be trusted.

Web pages loading EXTREMELY slow

It takes FOREVER for any web page to load (we're talking like several minutes even to load Google search), but it shows I have full signal strength. However, my husband's MacBook is functioning fine as well as his PC which all use the same network. I have an AirPort and AirPort extreme. I've even tried directly connecting to the AirPort extreme to see if that would help the speed problem, and it did--but only for a few minutes. After that, it displayed the same problems as before--MIND-BENDINGLY SLOW page load. I've cleared the cache, history, renew DHCP, reset the router... everything I can think of and still to no avail.
This all started happening after I was using my MacBook to connect my XBox360 to the internet and had to change some of the MacBook settings. I have since restored all the settings and turned off Internet Sharing.
I took it to the Genius Bar, twice, and they said it has to be my network, because it connects and loads pages at lightning speeds when I'm on the Apple Store network. Ugh. This is sooo frustrating and has basically rendered my mac useless.
Ideas?

Here are a couple things you can try:
1) If possible, bypass your router, and connect directly to your cable/dsl modem.
2) Try a different DNS (domain name server). This can resolve the problem if the slowness stems from looking up (i.e. "contacting") the web server. You are probably currently using the DNS of your ISP. Since your husband is not experiencing the problem, this might be a stretch, but still worth a shot. You can try OpenDNS (https://www.opendns.com/start/)

Web pages loading unusually slow. Load fine in alt browser

Web pages on numerous sites very slow to load. Even coming to Firefox to report. Including some pages coming up error as if there is no connection. I tried alternative browser and the pages load fine. I could have stayed on that browser but ff has always been my goto.
I have a nexus 7 (suppose I should say 1st gen now) running 4.3.

There are some problems with the new Android version (4.3), they should be fixed very soon (12-24 weeks), there is a solution, use firefox nightly, the superbeta version of firefox 26.
DOWNLOAD FROM: nightly.mozilla.org
Does the nightly work better?

Boot and page load very slow after 2nd HD install

Good morning.
I recently added a second slave HD (80 GB with a OS X partition) to my beige G3 MT. I am using the original 9 GB drive as the boot drive. Northing else was changed.
Since that time, the boot time has increased significantly (2-3X pre 2nd drive).
Also, page load times have been increased with the Norton AntiVirus symbol being displayed.
1. What's causing the slow boot? Is the CPU looking at the new drive and applying Norton before the original boot drive?
2. Are there settings in Norton that might help?
3. Is it even worth continuing Norton use for this OS 9.1 machine?
Thanks for your time!

Hi, Bruce. NAV is probably scanning the entire new drive at startup, thus accounting for the major startup slowdown. And no, there's no good reason to have NAV installed at all. Your Mac doesn't need antivirus protection.

Pages really slow after update

Since I updated pages my ipad and iPhone. It's is unbearably slow and crashes all the time. I go to use it and it takes ages to think about it. Then I will use it for a while. It will Crash or take absolutely ages to do what I'm asking it. I'm having to do everything in my notes page and then transfer it at a later date because I can't trust it to do things straight away. What should take 2 minutes now takes 10. Also when I highlight light something to either copy, delete etc.. It takes ages. I highlight something, it freezes, then un-lights. So I do it again and have to repeat the process at least 3-4 times before it finally works it out. Also if u want to copy something from another document and you go away from pages and then come back I have to wait at lease 30 secs to a minute before I can work on the document again. So if I have to cut and paste lots of thing the whole process is very frustrating .
Also if I work on a document and then have to go to something else, upon my return. I will have to wait 20-30 seconds before I can start tying again. And sometimes it crashes or opens a document filled with white and black squares and then crashes. And if I shut it all down to re open it. It will still be in the same state so I have to wait for a further minute.
I know it is this is the app as everything else works fine. I've un installed it and installed it twice and nothing have improved.
Please help to rectify this problem Apple.
Regards
GNIL1

Your lucky.
Might have to do that then. As it's killing me. Although last time I reset my pad. I took all day so I'll have to dedicate one of my days off.
If that doesn't work. I don't know what I'll do.
Very boring though!
Thanks for your ideas. Appreciate it.
Regards

Why is web page loading very slow from microsoft Outlook hot links

Clicking on any hot link embedded in an Outlook email takes from 45-60 seconds to load. If I cut and paste the same link, loading is almost instantaneous. Are there settings I can adjust? IE8 used to be somewhat slow sometimes but never this slow with Outlook links.

What can I do to help this situation?
I've got fresh copies of OSX running on the macs that I mentioned, and I haven't specified any dns settings in the connection properties. I don't think dns has been specified on the windows machines either.
A DNS server has been specified on the router. Should I try removing this ip address and let the router look for it's own dns server?

My Macbook Pro (purchased in mid 2009) runs really slow after updated the software.

How can I get it to run faster?

Find out what it is doing:
Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity
anything using double-digits is suspect.

My Internet Connection is Fast, but Web Pages load slowl

I have tested my connection on several websites. I am using RoadRunner and I consistently get speeds between 3500-4500 kbps. In the past few days I have the same internet speed but all my web pages load really slow. Up until this problem I would click on a link and it would take 2-3 seconds to load the next page. Now it is more like 15-20 seconds. Once I get a page loaded if I download something from that site it is still a fast download.
Any ideas on what could have slowed loading web pages , but download speed still shows really fast?
Your help is appreciated
Cheers
mrjazz

If your download speeds are still fast, it is most likely the broswer that is slow in rendering the pages.
Are you using Safari and if so, do you leave it open all the time? Safari is notorious for hogging RAM and CPU cycles and slowing to a crawl if you do not quit and restart it.

Slow web page loads on Mac, but not for PC

I use a D-Link wireless router (DI-524) for my PowerBook G4 15" and my roommate's Dell PC. Very recently I seem to get very slow web page loads with some pages not even loading at all.
Airport is consistently connected with no drops at all and when I'm downloading something it never gets interrupted the whole way through.
My roommate's PC has no problem whatsoever and all of the web pages that he visits load instantly. It seems that my main problem is with web pages.
I've tried doing a clean install on my Powerbook, I've tried resetting the router (I've tried upgrading the firmware but the router decided it didn't want to work with the new version). And surprisingly, I get the same slow speeds when I hook up my Powerbook to my router via ethernet cable. The only time my speeds are perfectly fine is when I hook up my Powerbook directly to the wall (I dorm in a university so we have a T3 line).
Can someone please give me some advice on this very frustrating issue?

In addition to Neds suggestions, empty the Safari cache (which should be empty after a clean install).
Goto the Safari Get Info screen (in Finder or in Dock if you have Safari there), click the triangle on languages, and disable those you don't use.
My Safari response time was significantly slowed after the 10.4.5 update, and using the combo updater took care of that. The 10.4.6 combo update is located here.

WRT54GS - Web page loads slow or not at all

My parents have two wireless laptops accessing their WRT54GS. Both receive excellent signal strength. Web pages load at normal speed for the first unit to access the internet on their network. However, the web pages will take forever or not load at all for the second computer, despite the fact that the signal strength to the second computer remains excellent. It does not matter which connects first and which is second; the problem still occurs.
I might mention that the computers and the router were purchased on Dec. 23, so everything should be current, with the exception of the 12/28/06 firmware release for the router.
Any suggestions would be appreciated!

hi...you can try different wireless settings on the router...
channel -- 1,9 or 11
under advanced wireless settings ,
beacon interval - 75
frag threshold - 2304
RTS - 2304
if this does not make any difference then upgrading the firmware could help you....

After upgrading to 8.0 the add-on compatability tool runs and the Getting Started web page loads every time the browser starts.

After upgrading to 8.0 from 7.0.1 every time I start FF I get the add-on compatibility tool to run and the Getting Started web page loads along with my homepage in separate tabs as well. So far I have tried running the installer again, disabling all add-0ns and custom settings and restarting and turning off automatic updates. Nothing worked there. I got the same behavior each time. I don't know what else to try other than a full uninstall and reinstall. Something I'd like to avoid if it's possible because of the time involved. This is the second time I have posted regarding this issue. The first time I didn't get a response. A solution or a possible workaround would be greatly appreciated if anyone knows of any. As a staff member and a global forum moderator for an anti-virus company I understand how hectic things can be at times but some feedback, good or bad, on this issue would be very welcomed! Regards, Ritchie...

Hi michaell, thanks for the reply. I tried everything in the Preferences are not saved link you provided and nothing worked there. If creating a new profile will delete all my add-ons and custom settings I might as well just do a complete uninstall and reinstall. That actually would be easier. That article told me how to save my bookmarks though so I don't have to loose those which is nice. I don't know if this makes any difference but there is a discrepancy between the preference file in the article which is: prefs.js and what's showing on my PC which is: prefs with no .js suffix. I tried to rename the file to prefs.js and restarted. No luck there either. It just created another prefs file. I guess we've pretty much exhausted all the avenues to try! I'm just going to go ahead and do a reinstall when I get the time. Thanks so much for your help michaell. I do appreciate the effort. Regards, Ritchie...

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up.

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up. My preferred web page "A" is still shown on the settings under -Tool-Options-General, home page address is correct and home button works correctly.
Some file somewhere is forcing this page upon startup. I would like some ideas where to look.
I have run various utilities such as AVG, Tweaknow, and spybot s&d newest version.
Its just annoying to have to look at Yahoo Brazil upon startup
A few months back, someone suggested some reset setting in Firefox, boy what a mistake, took a long time to get things back the way I like them, and it didn't work.
I see this in the troubleshooting info ???
"browser.startup.homepage_override.mstone": "19.0",
"browser.startup.homepage_override.buildID": "20130215130331",

The prefs that you posted are normal for a Firefox version (in this case Firefox 19.0.
Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 19 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

WRT350n Firmware Update 1.03.7 - Web page load really slow after update

Similar Messages

Maybe you are looking for