WRT350N : how to specify the default gateway?
Hello,
I would like to use my wrt350n as a dhcp server, but want to specify another router as the default gateway.
I have my wrt350n (192.168.1.254) and another modem/router (192.168.1.1). When a client connects to the wrt350n, it automatically receives as default gateway the adress of the wrt350 (192.3168.1.1). I would like to change that to reference the other adress 192.168.1.1.
Thanks for your comments
Raph
Solved!
Go to Solution.
Hello,
Thanks for your answer.
I try to give you more information.
The modem router (bbox2 : 192.168.1.1) is connected to an ethernet port on the WRT350 (192.168.1.254). I would like to desactivate the DHCP server on the bbox2 (because limited to 802.11g), and activate it on the wrt350, to have a wireless network in 802.11n. The problem when I do that, is at the dhcp server, the default gateway returns is always the ip adress of the wrt350 (so no internet access). Nevertheless, I have to specify the ip of the bbox (192.168.1.1) for the internet traffic. I don't find a way to change the value of the default gateway returns by the wrt350. I can set different values for DNS, but not for the gateway.
Actually, I turn on the dhcp server on the bbox and turnoff it on the wrt350, but my wireless spped is limited to 54Mbits (802.11g), and this not annoying for surfing purpose, but annoying when streaming video from my san connected to the wrt350n.
I don't know if it's clear now?
Thanks for your feedback
Similar Messages
-
How can I specify the default tab in a CHM Output?
My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.
Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you -
Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
ThanksHi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts -
HT1277 how do i specify the default mail account
how do i specify the default mail account if i have more than one accounts?
Not to worry i have found the setting, thanks
Message was edited by: Teli Protohmmm.. I've been complaining about this to the engineers for over a year. The storage location should be chooseable as should there also be a backup feature (as in Addressbook and iCal).
for those that want to change this... it would be cool for someone to write a non cryptic, complete 1,2,3 stepped procedure.
That is.. exactly what do you change to what in the mail user preference file? And what do you use to change it.. text edit? "[ ]" heretofor = folder
I would like to change my Mail storage location to the my [Documents] . Using Text Edit, I went into my user [Library], to [Preferences] and opened the com.apple.mail.plist and changed all the ~/Library/mail storage locations to ~/Documents/Mail
lastly I moved the [Mail] that was in the [Library] to my [Documents].
Didn't work. Restarting Mail got me into the guided set a new account (and as far as I can see there IS no way of not taking the guided set up as alledged above). There must be something, some built-in direction other than in the [Preferences] defaulting mail to be saved in the [Library] folder
If someone has done this and been successful.. a 1,2,3.. list would be apprecaited... and please don't leave any details out. Thanks
dual core Intel G5 Mac OS X (10.4.5) Pismo powerbook specialist -
How to change the default date in Person assignment tab?
Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
MichelleHi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish -
How to set the default display date of Calender prompt of SMPortal???
Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
I couldn't find any option in Request offering Wizard as attached below,
Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
Is there any other way to accomplish this???
Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana BabuThis is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1.... -
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
RegardsYou need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
How to specify the target name while deploying a code in OSB-- Plz Help
Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
PrabhuHi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj -
Numbers to CSV export script: how to specify the encoding?
Hi,
I'm using the following script to export a Numbers document to CSV:
# Command-line tool to convert an iWork '09 Numbers
# document to CSV.
# Parameters:
# - input: Numbers input file
# - output: CSV output file
# Attik System, Philippe Lang
# Creation date: 31 mai 2012
# Modification date:
on run argv
# We retreive the path of the script
set myPath to (path to me)
tell application "Finder" to set myFolder to folder of myPath
# We get the command line parameters
set input_file to item 1 of argv
set output_file to item 2 of argv
# We retreive the extension of the file
set theInfo to (info for (input_file))
set extname to name extension of (theInfo)
# Paths
set input_file_path to (myFolder as text) & input_file
set output_file_path to (myFolder as text) & output_file
if extname is equal to "numbers" then
tell application "Numbers"
open input_file_path
save document 1 as "LSDocumentTypeCSV" in output_file_path
close every window saving no
end tell
end if
end run
It works fine, except that I don't know how to specify the encoding of the text in the CSV file (Latin1, MacRoman, Unicode). This option is available in the export dialog of Numbers. Any hint on how to do that is welcome. (GUI Scripting?)
Where can I find documentation on the iWork "vocabulary" available? Is there a definitive documentation somewhere? I tried to record an manual export in the script editor, without success. Script is more or less empty.
Thanks!
Philippe LangA further note from Yvan. He's made some revisions to the script sent earlier.
--{code}
--[SCRIPT export to CSV with selected encoding]
I added some features.
(1) Defining the encoding thru the preferences file apply only if
the application is not in use because the file is read only once in a session.
A test urge you to quit Numbers if it is running.
(2) info for is deprecated so it may be removed by Apple tomorrow.
I no longer use it.
(3) just for the fun, I added a piece of code allowing you to select the encoding on the fly.
Thanks to the property chooseEncodingInScript, at this time the script use Unicode (UTF-8)
(4) I'm wondering which tool is used to launch this script,
I don't know the way to pass arguments when I run one.
Yvan KOENIG (VALLAURIS, France)
2012/06/13
property chooseEncodingInScript : false
true = the script will ask you to select the encoding
false = the script use the embedded encoding
on run argv
set input_file to (item 1 of argv) as text
set output_file to (item 2 of argv) as text
set myPath to (path to me) as text
tell application "System Events"
set theProcesses to name of every application process
set myFolder to path of container of (disk item myPath)
set input_file_path to myFolder & input_file
set output_file_path to myFolder & output_file
set extname to name extension of (disk item input_file)
end tell
if extname is "numbers" then
if "Numbers" is in theProcesses then error "Please, quit “Numbers” before running this script !"
if chooseEncodingInScript then
set theList to {"Mac OS Roman", "Unicode (UTF-8)", "Windows Latin 1"}
set maybe to choose from list theList with prompt "Choose the default encoding applying to export as CSV"
if maybe is false then
error number -128
else if item 1 of maybe is item 1 of theList then
30 -- Mac OS Roman
else if item 1 of maybe is item 2 of theList then
4 -- Unicode (UTF-8)
else
12 -- Windows Latin 1
end if
else
4 -- Unicode (UTF-8)
end if
do shell script "defaults write com.apple.iWork.Numbers CSVExportEncoding -int " & result
tell application "Numbers"
open input_file_path
save document 1 as "LSDocumentTypeCSV" in output_file_path
close every window saving no
end tell
end if
end run
--{code}
Regards,
Barry -
How to set the default NetworkInterface for the default socket factory?
Hi,
I would like to know how to set the default network interface used by the JVM. I saw that you can specify the network interface when creating a socket. But my problem is that I dont want to change every socket creation in the application and even worse some partner's libraries wich I dont have access to code also create sockets. So is there a way to specify to the JVM wich interface to use by default? I didn't saw any System.properties to set this and my googling fishing didn't return anything usefull.
ThanksBy default it will use whichever one the routing tables tell it will give the shortest path to the destination. For globabl changes, adjust your routing tables. You can't do this from Java, you have to use whatever OS tools are to hand.
-
Why should client PCs always know the default gateway?
Considering that my home computer has only one connection and it is to my ISP,
why does it need the default gateway to be configured (being DHCP client)?
Where else my connection can be deviated from this unique connection cable?
Is it possible to configure a router to which my PC is connected and, then,
the client PCs would not need to be configured with default gateway?
Or client PCs always have to know default gateway?
Why?How IP Packets are Routed on a Local Area Network
http://www.anitkb.com/2010/06/how-ip-packets-are-routed-on-local-area.html
Thanks, this helps but still confuses.
The article tells:
" Now that WK1 has WK2's MAC, it can send the packet directly to WK2"
A)
I do not understand what does it mean if computer has one outgoing network cable to switch.
It is switch who has different connections and, thereafter, can commutate different communication circuits.
So, I can only understand that WK1 somehow tells to switch to connect him directly to WK2 but not to router.
How?
B)
Were WK1 and WK2 connected directly to a hub, instead of switcher, would they be able to communicate directly?
(The definition of a hub is that it takes a signal and broadcast it through all connections)
C)
Also, reading about switch-router-hub, I cannot understand which role is played by a client computer in communication
(of a hub, of a switcher?)? Neither of them? What?
A. I believe a fundamental understanding of what a switch and the differences and the similarities between a hubs, bridges and switches, as well as the OSI model, may be helpful at this time.
First, the OSI model is an industry standard defining how hosts communicate with each other. There are 7 layers. THe bottom layer has no intelligence and is the physical connection. As you go up the ladder, the intelligence increases.
7 Application (Application Gateways, Proxies, etc, operate at this level)
6 Presentation
5 Session
4 Transport (TCP, UDP, SPX live here and operate at this layer, NAT overlaps 3 & 4)
3 Network (IP & IPX live here. NetBEUI and DLC overlap 3 & 4. Routers operate at this layer)
2 Datalink (MAC addresses live here. Bridges and Switches operate at this level)
1 Physical (Hubs operate at this level)
Hubs, Bridges and switches allow ethernet hosts to communicate with each other, no matter what protocol is being used, whether TCP/IP, IPX/SPX, NetBEUI, DLC, etc. They transmit packets on the network.
A hub is a Layer 1 device. It is a dumb device blatantly allowing all hosts to communicate to each other with no discerning source or destination addresses, whether MAC, IP, IPX or any other factor, in the packets.
A bridge is a Layer 2 device. It bascially has two interfaces connecting two network segments together. If a host on one side of the bridge, we'll call that SegmentA, is trying to communicate to another host on the same SegmentA, the
bridge will not allow the traffic to go to the other segment on its other interface, SegmentB. This helps reduce unnecessary traffic and reducing collisions, which slow down the network. If the host on SegmentA is communicating with a host on SegmentB, the
bridge allows the traffic. This is because a bridge has enough intelligence to read the Link layer, which has the MAC address (the physical address) of the interface or network card. It can read the source and destination MAC and determines whether to allow
that traffic across or not depending on where the source MAC is and where the destination MAC is.
Switches are basically multi-port bridges. When a switch intializes, it reads the MAC addresses of all connected devices and creates a "destination table." Notice I didn't say "routing table" since that is associated with IP addresses.
Therefore, if a host on port# 14 on a switch needs to communicate with a host on # 33 on the switch, the switch reads the source and destination MAC address in the Datalink Layer (Layer 2) and knows the destination is on port# 33 based on the destination
lookup table it created of all connected devices. It will then only send this traffic between the two ports. This essentially reduces unnecessary traffic on other ports increasing efficiency.
There are also Layer 3 Switches. They are combination switches and routers that can be managed where you can configure each port to either be switched or routed.
So to answer your questions:
A)
I do not understand what does it mean if computer has one outgoing network cable to switch.
It is switch who has different connections and, thereafter, can commutate different communication circuits.
So, I can only understand that WK1 somehow tells to switch to connect him
directly to WK2 but not to router.
How?
As explained, the switch simply discerns traffic by MAC address. The client side TCP/IP subsystem using the ANDING process, as I've explained earlier, and JM's blog explains, determines where the computer is sending the packets. A computer does not "Tell"
the switch or hub anything. It simply dumps the packet on the wire and the switch reacts to what it finds in the Datalink layer, and if a hub, it simply sends the traffic on all ports.
B)
Were WK1 and WK2 connected directly to a hub, instead of switcher, would they be able to communicate directly?
(The definition of a hub is that it takes a signal and broadcast it through all connections)
It's not called a 'switcher.' It's called a 'switch.' As explained, a hub blatantly broadcasts traffic on all ports. It is up to the sending host and receiving host to read all packets and figure out what belongs to it or not. If a destination address doesn't
apply to a computer that hears the data, it simply ignores it.
C)
Also, reading about switch-router-hub, I cannot understand which role is played by a client computer in communication
(of a hub, of a switcher?)? Neither of them? What?
The computer is simply plugged into these devices. The devices have their job to do, and the computer has its own.
I hope that explains this part of your networking questioning.
Ace
Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003, Microsoft Certified Trainer, Microsoft MVP - Directory Services. This posting is provided AS-IS with no warranties or guarantees and confers no
rights. -
The Default Gateway Is Not Available / Problem
Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft WindowsRun the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
How to change the default apex port
hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do
Maybe you are looking for
-
Is partition "PBR Image" unnecessary after upgrading to Windows 8.1?
Laptop Vostro 3560, bought with Windows 8 installed and upgraded to 8.1. The disk has a "PBR Image" partition (NTFS, 9.3 GB). I suppose this partition is used to restore the factory configuration, with Windows 8. I do not expect to go back to Windows
-
Hi, I have a question on using EJB / or RMI servers with CORBA clients using RMI-IIOP transport, which in theory should work, but in practice has few glitches. Basically, I have implemented a very simple server, StockTreader, which looks up for a sym
-
Style sheet problem, I think
http://www.jeffersoncircuitcourt6.org/preview/about-jefferson-circuit-court6.html I have a style sheet up for the default type to be 1 ems on 1.4 ems line spacing. IE 6 and 7 seem to be paying attention to the style, however, FF does not appear to be
-
Hy, I have written an application that uses the javax.comm package. My application contains many classes disposed in \classes directory. The main class is admin.class. If launch the application with a batch file (in Windows): echo off cls java -class
-
Final Cut shuts down when I try to stop logging and capturing
Ok, so I know whoever answers will need more technical specifics but for now this is the deal. I have been trying to import footage from a DV camera into final cut and once I try and stop the camera or when I press 'esc' final cut unexpectedly shuts