WRT350N Losing connection with web browser after running Bittorrent client

My Setup:
HP Pavillion Dual Core Desktop PC 2GB Memory
Windows Vista Premium Home
Linksys Wireless WUSB G Adapter for my destop
Time Warrner Cable Modem - Webstar Model
I have had a WRT54G for a long time, and it has been flawless, I decided to buy a Refurbed by Linksys WRT350N because I anticipate getting a new device and devices that will use the Draft N Standard.  Anyhow, I have it set to narrowband to use ONLY Wireless G, have it set up as i Did with my G Router to use WEP with Broadcast SSID ETC ETC, opened up all the same ports forwarded on it and made all same settings as in my WRT54G.
Here is the problem:
I typically use a Bittorrent client to download large files to my computer, specifically UTorrent.    With my WRT54G I would get good speeds but even after a couple of hours I would still be able to start my Browser, IE or Firefox 3 and get, albeit slow, but still get my webpages to render.
Now when UTorrent runs for a couple of hours with my WRT350N I load my web browser and I get a message that says "Cannot connect" or connection is timing out.  Sometimes it will load the page but looks more text like than HTML, and I attribute that to packet loss?
Anyhow I did use Linksys Tech Support, and they suggested I changed my MTU to a lower setting instead of Auto which I did and it didnt make a difference, welL i shouldnt say that I do get forecastfox to load on FIrefox where it didnt load before and sometimes I get the non html version of the pages to load.
Any help would be greatly appreciated, I am patient and LOVE a project and I have a feeling this is going to be one.

Actually that is what I was doing last night and got a bad flash and bricked my router..so its on its way back to Linksys...

Similar Messages

  • Error on Form with a WebBrowser control: A script on this page causing your web browser to run slowly.

    Hi,
    I have a form with a WebBrowser control. When I load a page, I am getting the following error popup:
    Stop running this script?
    A script on this page is causing your web browser to run slowly.
    If it continues to run, your computer might become unresponsive.
    How to suppress the above error? I tried using WebBrowser.ScriptErrorsSuppressed by setting it to true. But it didn't work for me.
    Thanks in advance.
    Thanks Prasad

    Hi,
    I have a form with a WebBrowser control. When I load a page, I am getting the following error popup:
    Stop running this script?
    A script on this page is causing your web browser to run slowly.
    If it continues to run, your computer might become unresponsive.
    How to suppress the above error? I tried using WebBrowser.ScriptErrorsSuppressed by setting it to true. But it didn't work for me.
    Thanks in advance.
    Thanks Prasad
    Hello,
    In addition, would you mind sharing us the version of your IE and the detailed html code of that page?
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MBA not opening web browser after WiFi connection

    MBA not opening web browser after WiFi connection.  Browser (Safari) starts and stalls frequently.  My MacBook Pro whoks fine on my same WiFi using Airport Extreme.  any suggestions?

    Hello,
    The closest Microsoft forum would be the
    Windows 7 forum on Microsoft Community.
    However, this is not a Microsoft product, so I'd ask on
    http://help.ask.com/link/portal/30015/30018/ArticleFolder/9/Ask-com-Q-A-Community
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog:http://unlockpowershell.wordpress.com
    My Book:Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • After Effects customize template with web browser?(layer name giving a variable names)?

    After Effects customize template with web browser?(layer name giving a variable names)?
    so many web sites provideing this service ...online intro makers
    please help me .what plugins using .how to setup this kind of service?

    Sir please see these sites...
    (www.makewebvideo.com,
    templates.introchamp.com.....)
    some sites are in online ...these are using AE for render

  • We have problem with chat, icant open chating appear this masseg( DoookNet requires a Java Compatible web browser to run.)

    when i need open the chat page ,appear this masseg :
    DoookNet requires a Java Compatible web browser to run.
    i need solve for this problem.
    best wishes,
    abu_ahmed

    good aftrnoon,
    About my problem i not found solution for that.

  • Infoview stop running this script ...web browser to run slowly error

    Hi Everyone,
    I hope this is the right forum for this question. I'm experiencing 1 error with 1 report run from Infoview. When I run the report, I get this error: "Sop running this script? ... A script on this page is causing your web browser to run slowly. If it continues to run, your computer might become unresponsive." I say No twice to not stop running the script and then the report eventually displays.
    Is there something specific I should look for in my report which may be causing this?
    Thanks,
    John

    Hi John,
    Start by removing parts of the report to see what is causing the problem, Start with subreports and check the DB connection info if there is any.
    Verify the Report in the Designer also to confirm the connection info is correct.
    Don

  • Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

    Hiya!
    This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
    How to replicate the issue:
    Open a file from a network share.
    Edit file.
    Leave computer on with file open. Computer goes to sleep or into stand-by mode.
    Wait a bit
    Wake up computer
    CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
    What I've tried:
    http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
    http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
    Work Around:
    I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
    Please let me know how I can alleviate this issue!
    Thanks
    -Chris

    Hi,
    Are those problematic documents created via previous versions of Office?
    Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
    http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
    Regards,
    Steve Fan
    TechNet Community Support

  • My MacBook Air (13" Mid 2012) 1.8 GHz, i5, 4 GB 1600 MHz DDR3 becomes sluggish, particularly web browsing after upgrading to yosemite from mavericks

    my MacBook Air (13" Mid 2012) 1.8 GHz, i5, 4 GB 1600 MHz DDR3 becomes sluggish, particularly web browsing after upgrading to yosemite from mavericks

    Mine is exactly the same machine and is working with any kind of problems.
    Try to see this:
    Clean space, make faster

  • Losing connection with external monitor

    Hi
    I have a MacPro G5 running FCE HD with firewire connection through a Sony DSR11 deck hooked up to a Sony Trinitron DV Pal external monitor. I was until recently using a brand new external drive shared over a network connection with a PowerMac G4 running FCP3 linked to DV/VHS combo deck and Trintron monitor. That shared drive has just failed and is awaiting replacement so I am back to using the internal drive on the MacPro - which is where I have recently encountered a very frustrating problem. One day the output to the external monitor is fine, the next day is has gone. I have tried two suggestions from this forum which have both worked - temporarily.
    1. Creating a new user account. 2. Trashing preferences. If this problem persists despite these short term fixes can anyone tell me if there is something else I should/could be considering. Also can I run FCE on the PowerMac ?
    Many thanks

    Tom
    Thanks for the reply. I will try a new cable if I keep losing the connection. The external drive (when I get it replaced) is shared over the ethernet. The external monitor problem I have is only with the set up running FCE on the Mac Pro. My external monitor connected to the Power Mac G4 with FCP3 has worked fine for 3 years now.

  • I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

    I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

    4 possible causes of that message:
    1] Activation server is actually down. Very rare occurrence, but it does happen.
    When it does occur, down time is very short. Solution - try again.
    2] Your firewall or antivirus are blocking the connection. Solution - temporarily
    deactivate your firewall or antivirus until the update completes.
    3] Computer being used for the activation has previously been used to jailbreak
    an iOS device. Solution - use a computer that has not been used to jailbreak an
    iOs device.
    4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
    may have made changes that will prevent the iPhone from successfully activating.
    Terms of Use for this forum prohibit discussion of jailbroken iPhones.

  • Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi

    Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi. It has not happened before

    Try restarting or rebooting your iPad. See if that helps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • I keep losing connection with my printer

    I keep losing connection with my printer.

    Can you provide more details?
    - What kind of time capsule you are using?
    - What kind of printer?
    - How is the printer connected (Wifi, LAN, USB...)?

  • HT204291 Losing connection with Apple TV when MBA left idle ?

    After connecting my 2012 Mac book Air 13" to the apple TV via air play, I lose connection with the TV after exactly seven minutes. It happens only when my Macbook air is left idle. Pls suggest .

    I would like to further clearify my issue :
    1) MBA is playing online content on a monitor via Apple TV.
    2) I leave MBA idle (meaning the online content is still playing) .
    3) After every 7 mins , i find the online content playing on my MBA ( not on a monitor via apple TV)
    What i guess is some setting issue . Either on Apple Tv, MBP or monitor.. pls suggest now

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

Maybe you are looking for

  • ITunes Store no longer remembering apps/music already downloaded

    Hi, i've got the latest iTunes, and it occurs to me a phenomenon that itunes store previously remembers and indicate the status of apps/music already purchased. to make myself clearer, for example i have already downloaded Whatsapp a long time ago, b

  • Creating Dashboard Widgets

    Ok, I'm trying to create my first Dashboard widget; and I need some help. Heres my Info.plist: <plist> <dict> <key>CFBundleIdentifier</key> <string>com.JZ.widget.Mailer</string> <key>MainHTML</key> <string>index.html</string> </dict> </plist> Heres m

  • CS6 Save for Web image size limit (Retina)

    I have been designing for a lot of mobile sites these days, in particular: iphone retina display (640w).  Most of the time these designs can be long in the tooth with the height of these documents - exceeding 8000 pixels at times.  I noticed that 800

  • Early 2008 Mac Pro (8 core) Cabinet Noise

    I noted that this discussion was archived, without a solution being posted.  Many people seem to be experiencing this odd Mac Pro noise that comes and goes. Some users say it is a fan, some the PSU, others say its the disk drives. I have experienced

  • Why does my Iphone 4 keep freezing then shutting itself down?

    an app will freeze then that freezes my whole phone, what can i do to stop this?