WRT350N Media Server does not serve music up to a Directv HR20
I have a Directv HR20. This device is a UPnP device that is capable of playing Music/Picutres on the TV/Stero system using a media server software. The intention of my purchase of the WRT350N router was to install a 500GB USB drive onto the router and use the media server software to supply music and photos onto the Dirctv HR20 DVR. This has not been an easy task. I can see the pictures and play the pictures without an issue. I contacted Linksys support via the Live chat and spoke with them explaining how the media server is suppose to supply the music as well and the Directv HR20 is ecpecting a LPCM trascoder to work. They assured me that they would pass this information up to the development team. This was almost a month ago and I have not heard back from them yet. I downloaded the beta version of the firmware and tried it, but it to did not work. Other media server software does in fact work like Nero 7 media server and Twonky media server software. I currently use the Nero 7 media server software on my PC to serve music and photos to the Dirctv HR20.
The Directv HR20 uses a WET54g currently to connect to the home network. I will need to update this to a "n" type of connection when a game adapter or bridge device is avliable for "n".
So now here I sit with an expensive USB drive and I cannot use it for the music side of the media server portion of the WRT350N.
Any help would be appreciated!
Message Edited by Spanky_Partain on 07-24-2007 07:35 AM
It is really hard to believe that Linksys is not interested in fixing this issue. The Directv equipment that is DLNA compliant to Doc 1.0 and the Samsung LN52A860 which is also DLNA compliant will NOT see the media server and take advantage of the USB storage device that has Music and Photos stored on them.
Come on Linksys by Cisco, get your firmware compliant to the standards the industry is following and STOP tyring to write your own!
Mark
Similar Messages
-
Server does not support setting more than 5 shared access policy identifiers on a single container
Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
inputAsset = (from a in _context.Assets
where a.Id == AssetId
select a).FirstOrDefault();
policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;
else
inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
policy = _context.AccessPolicies.Create(
inputAsset.Name,
TimeSpan.FromDays(30),
AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
policy.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures please check if it helps.
Regards,
Shirisha Paderu. -
I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
Crstal Report Server does not working on installation of Crystal Design
Hi,
I had installed Crystal Report Server 2008 on a machine, I was able to login and open the CMC console as well but on installation of Crystal Desing the CMC and inforview are not opening. its displaying some dll file is missing.
Kindly inform whether Server does not work after installation of Design on the same machine.
Thanks & Regards
PNN MurthyQuestions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).
-
Suddenly I can no longer email photos directly via iphoto mail. The box comes up that says "server does not recognize username or password". I used to be able to re-size my photos before sending so that they jpeg or pixels were larger for publishing in newspapers or magazines, but I can no longer do that. Apple tech support told me to change my iphoto "preferences" to using regular email to send. But that does not allow me to re-size. Is anyone else having this problem? I don't know if there was an update that caused this or what? Please help.
The box comes up that says "server does not recognize username or password".
That error message usually will pop up, when there is a conflict between the "From" setting for the mail account you are sending from and the selected outgoing mail server. Probably the outgoing Mail server is receiving a user name and password it does not understand. When the mail returns unsent, do you see the "Try again" panel with the option to select a different outgoing mail server?
If you do not see this panel, change the Mail "Preferences > General" to "If Outgoing server is unavailable: Show a list of alternate servers". This way, you will know, which server Mail is trying to send from.
Have you tried to set "From" pop-up menu to one of your other email addresses? If that works, change your settings in Mail to always send from this address. You can set this option in the Mail "Preferences > Composing: Send New Messages from". I have my "Send New Messages from" set to "iCloud". That is working best for me with iPhoto. -
I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
I keep getting a popup error message in Ical "server does not recognize name/password
I keep getting a popup error message in Ical "server does not recognize name/password" This started after they did the change to Icloud and extended our subcriptions.
TriciaI guess that the server name is incorrect, then.
Did it ever work?
Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password. -
Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.
Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852 -
Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?) -
Oracle service, Listener and http server does not start automatically
Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar. -
I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab AllemanHi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
Hi,
I've had this issue before when upgrading to 10.8 from 10.7. The issue is that my previous working jabber ID ([email protected]) stops working and I can only login to the XMPP server using [email protected] In previuos upgrades, all I had to do to fix the issue was to re-add the domain witrh the serveradmin tool, adding it to the jabber:hostsCommaDelimitedString.
#serveradmin settings jabber:hostsCommaDelimitedString="host.domain.com,domain.com"
In 10.9 this does not work. Both host and domain entries are already in the config but I still can only login when changing my JID to be [email protected]
Any hints?
Regard,
//StaffanSolved it myself! It seems like the #serveradmin script for modifying / adding the domain aliases to the ejabberd server does not work correctly. After looking through the different sm_.xml files created when adding a domain the script does not modify the <local><id> that the server uses to identify the JID with.
After manually modifying that id to match my domain, and restarting the ejabberd server, it works fine again!
It seems like when adding or modifying the jabber:hostsCommaDelimitedString="" the server default hostname is always inserted into the <local><id>.
//Staffan -
Compiler warning: Source folder "server" does not exist and will be ignored
Hi,
i am using NWDS 7.0 SP16. I have a development component type "J2EE Sever Library", which uses a java component. Everything works fine, except during the build i get a warning "Warning: Source folder "server" does not exist and will be ignored.".
Then i created the folder named "server" manually, but the build finished again with warning, now saying:
"Warning: Source folder "server" exists but is empty and will be ignored."
I created a dummy-file in the directory "server" and now the compilation is fine, no warnings.
I like to get my build free of any warnings, so what's wrong here? I found no documentation to create the folder/file manually.
Any help is appreciated.
Regards,
ThomasHi Raman,
I am also getting the same error . i moved my srm transports from DEV to QA and replicated the datasources into BI . and then i moved the BW transports from dev to QA.
when i check the datasource it is pointing to D60 instead of Q60 . when i check the transformations getting the same error :
source system dosen't exist.
can you please let me know how you resolved this issue. your reply will be highly appreciated.
Regards,
Sri
Maybe you are looking for
-
Drag and Drop no longer works on iPhone 4.
After updating my phone recently, I can no longer update music on my iphone 4. I used to be able to grab a random song from a file on my computer and drag and drop it onto my phone, without adding it to iTunes. Now, I can't add anything to my phone
-
IPOD Help~(cannot view anything except a white blank screen)
Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~ Anyways...I need some help. Here's the story. I was updatin
-
Why can't modify the vlan aging time
4506-1#sh mac add aging-time Vlan Aging Time Configured Aging Time Global Vlan Admin Age: 300 1 300 300 100 300 300 300 300 300 500 300 300 501 300 300 502 300
-
Client not recieiving ip address
I have a C857 wireless router and for some reason it has stopped sending my laptop an ip address nor can I see the wireless network when i browse for the network. If I connect to the router with a cable, I get an ip address from the DHCP setup. Does
-
Need help regarding short dumps in BW
hi all, We have a problem in our production.Thousands of short dumps have been created in a day stating "Runtime Errors DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB" ===================== An exception occurred. This exception