WRT350N Storage problem

Using WRT350N with Firmware 1.03.2.
I can't detect any USB storage device attached to the router.
I have tried numerous USB Storage devices and numerous file systems (including FAT32), but I can not get the router to recognize these drives.
the Mass Storage devices that I use are in various sizes (128MB, 64MB, 160GB).
I even formatted the disks to get them blank.
to observe the problem:
If I go to the "Storage" Tab and "Disk" sub-tab, all I can see is:
Next to "Disk detail" i see the message "There are currently no available disks"
next to "Erase Disk" i see the message "No disks are currently defined"
what can be done to fix this?

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & then check using the administrative login it will definately work!!

Similar Messages

What Everyone Should KNow and Linksys Should Advertize About WRT350N Storage Link Limitations

I have spent hours with Linksys online chat trying to get my wrt350N storage link to work as advertised. Basically, I want to hook up a 400gb mybook hard drive and use the networked drive to backup my netwroked computers over the wireless network. While I can write individual files to the networked hard drive, and can copy and paste large folders using windows explorer, I can not use backup programs. The netowrked drive reports incorrect information as to its capicity to "my computer" and always shows up as "read only" while some programs don't seem to mind this, every backup program I have used has problems with this clitch.
After several sessions with linksys and having retuend the router to linksys for a new one, this is what technical support said this morning:
"You: ok so if I have you right, the router's storage link is not guaranteed to work at all with >300gb storage devices, does not work at all with 3rd party backup programs, and does not provide a backup program of its own, is that the bottom line?
Tech Support: Exactly. That's its product limitation."
Just so everyone is clear, Linksys does not gauruntee that storage link works at all with drives greater than 300gb, it is not compatable with 3rd part backup progrmas and does not provide a backup program of its own.
This is independant of ntfs vs fat32 and yes I do have the new firmware 1.03.2 and have it correctly installed (linksys checked all of my settings online).
If I am missing something and there are others out there who are gettnig storage link to work with backup software, I would love to know what I am doing wrong, because 7 different linksys tecnical support people have been unable to tell me.
Since Linksys is unwilling to place these product limitations on their packaging, I thought that potential users deserve to know the limitations of this product.
(Mod note: Post has been edited for guidelines compliance.)Message Edited by primus on 03-04-2007 08:43 PM

sounds like you are in the same boat I was. I bought the WRT350N to use with my macbook pro and attached a 500gig usb drive to it for remote storage. I got nothing but permission problems copying files. The save usb drive worked fine in a dlink storage box. I took mine back and ordered the
Airport Extreme-N
- James

Storage problem due to error Accessing to DialogRequestQueue in BatchProcessModel

Hi,
   we are using the TS 3.1 BatchProcessModel for an application in a client and we've found an error. Until now they were producing only 2 shifts a day. Since one week they start the third shift implying 7 days/24hours production. After this week they got one message error and TS terminates (I attach the message). This problem is related to the DialogRequestQueue. This Queue is created at the beginning of the BatchModel (Create Dialog Request Queue step) and in the middle of the Batch Loop there's a sequence call step with the name "Wait For TestSockets -- GetUUTSerialNumber" that calls the sequence "ProcessTestSocketRequests". In this sequence there's a step called "Get Next Request" where there's a Dequeu operation.
   The error message that we get seems to be related to a storage problem, something like the Queue is not dequeued and get bigger and bigger, is it?
    Some idea how to repair this problem? Thanks in advance!
Mackemann
Attachments:
Error.JPG ‏98 KB

Hi
it a though task,with out disturbing how can we do.
Ok
Option 1
Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified. so the the transformation get deleted in qulity for the particular source system
OR
Option 2
Manually in the Quality system you can use RS_TRANSTRU_ACTIVATE_ALL in se38
Last optionis creating the deletion request from Development and importin the request.
once this is done in the
Create a new request in the Development , Add the old request which is already transported into the quality before.
in the new request delete the object which are not required and relese it and import that to quality.
now all the status will turn green.
Santosh
Edited by: Santhosh Nagaraj on Nov 14, 2009 4:33 AM

Storage Problem with Zen vP

Hi folks,?I recently got?a Zen vPlus for Christmas, and with only 82 songs, 7 pictures, and [short] video, it appears that all of my 2 GBs are already used up. When I go into 'extras' and 'removable disc', it seems that GB is dedicated just to that, which seems strange because when connecting it to the computer, the 'removable disk U: dri've' appears to have no files on it. Has anybody had similar issues? More importantly, does anyone know what the problem may be with my storage? Surely the 2GBs have not been used up with so few files? After all, it is advertised as being able 000 songs... Many thanks for your help,?- CD

It's not a storage problem, but your Zen has been configured to use gb of its space as removable storage. You can get it all back by going to Extras ---> Removable Disk --> Hold Back Button --> Selecting Disable. You can also switch the capacity, if you want a small portion of your space to be used for non-media files.

Storage problem with ML installation

How can Imnotice if I may not have enough storage for the installation? All went smoothly but after restart I have had white locked screen with windmill for the past thirty minutes and I cannot do anything, nothing moves. Should I try forced restart?

It's not a storage problem, but your Zen has been configured to use gb of its space as removable storage. You can get it all back by going to Extras ---> Removable Disk --> Hold Back Button --> Selecting Disable. You can also switch the capacity, if you want a small portion of your space to be used for non-media files.

I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB avail

I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB available out of 5GB after deleting everything. I'm also out of town and cannot connect to a computer. I have wifi access though. Help?

Update
OK, Today I went ahead & booted & tried again & it worked this time.
Not sure why it didn't yesterday. Maybe the servers were just overloaded? Several others reported similar.
Also yesterday when I ran Speedtest it showd download at about 25 mbps, This morning just before I re-started the download it was showing just above 30 mbps. So maybe the internet was less busy? Or at least the parts between me & the test server.
& so far it is working ok.

Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems

Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems?

And or use it at the same time my ipod is using a public wifi source for the internet doing my homework?

Will Macbook Air(2012) with 256G storage flash have storage problem

Will Macbook Air (2012) with 256G storage flash have storage problem described in "MacBook Air Flash Storage Drive Replacement Program"?
In the web page http://www.apple.com/support/macbookair-flashdrive/, it says that Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. I wonder whether Macbook Air with 256GB flash storage may come into the same problem?

Welcome to Apple Support Communities
No. 256 GB flash storage does not have that problem. However, it's important that you make backups of your data to keep your files safe

Storage Problems. I recently purchased a Canon Vixia HF G30.

Storage Problems. I recently purchased a Canon Vixia HF G30. I have the most recent updates for FCPX. After importing 59 clips or 120 minutes of AVCHD footage at 59.94 fps/1080 with surround sound I am finding that my files are huge!!!??? Using FCPX editing this footage is eating up a ton of space on both my macbook pro's hard drive (500 gb) and my external drive which is down to 2.78 tb from 3.67.   What am I doing wrong?

Thank you Russ and Bob. This will help me edit the video I took at my nieces wedding. I'm still having trouble
Russ, I m not sure if I chose to optimize at import. However, that is very likely as I had to change the automatic import setting of 23.98p(?) and choose to import at 59.94i 1920/1080 with surround sound audio.
Russ, what setting would you recommend that I import my video at?   I filmed the wedding in AVCHD at 59.94i at 28 mbps.
Do either of you think I should delete the Macintosh HD Projects and Events folder?   Trash my current event and project and start over?
My old events and projects should be ok if I do this right? They are in a separate folder and there is a backup folder as well.
By the way the Macintosh HD Projects and Events folder has 345 GB of data! I have no idea why that is. I cannot figure out how to open that folder to view the content.
I updated FCPX after importing my AVCHD video the night before - I also noticed that when I updated Final Cut Pro X - it created two new folders.... the previously mentioned Macintosh HD Projects and Events folder as well as a Macintosh HD Old Final Cut Projects and Events folder.
As stated previously the Macintosh HD Projects and Events folder has 345 GB of data. The folder for the Old Final Cut Projects and Events is 59 GB - Prior to updating FCPX I had moved all of my FCPX projects and events to my external drive along with my HVR folder which is currently 8.16 GB.
After updating FCPX and prior to joining this support community - I copied/moved both the Macintosh HD Projects and Events folder as well as the Old Final Cut Projects and Events folder along with the HVR Folder to my external drive - then trashed the existing folders on my macbook's hard drive.   when I opened FCPX to continue working on my newest project I got the read box of death on my project's clips and timeline - I was able to relink those files - but I'm still noticing that after continuing to edit - and with a timeline that is only 37 minutes long - I'm down even more GB on my macbook's hard drive as well as my external drive? Most of this data is grouped in "yellow" or other data when I go to view "about this mac" then click on the storage tab.   At the moment the "yellow/other" data is taking up 105 GB on my macbook's drive and climbs quickly as I edit my footage.

Ipon nano 3rd generation red. Sync and storage problems.

I have just got the new iPod nano (product red) 8 GB capacity. When i started to sync with my Intel Macbook i got suprised with a sync and storage problem. It starts syncing and suddendly it stops and lock the iPod and the Itunes. The must surprising is that happens every time the storage capacity reaches about 300 mb of music. Does anybody got this kinf of problem?
I have tried all the solutions I have found: formatting the iPod, connecting on a PC, restoring the factory settings and nothing works.

You'll want to copy what is currently on the Nano to your iTunes library on the laptop. Your iPod can only be synced with one iTunes library at a time. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Nokia belle FP2 c :drive storage problem

i m havin a great problem with nokia 603 belle fp2 device ... I have updated almost 1 n a half years ago ... Since then i facing storage problem in c drive ... Automatically memory vanishes from c drive ... Though I don't install apps in c drive , im facing this problem ! I have to restore my device when memory in the c drive goes low ! Is there any solution ? Please help me ...

Hi shafi4742,
Welcome to the forum!
Aside from the software update, did you install any particular app prior to this issue? Since the issue started after you updated the phone's software to Nokia Belle FP2, you may try reinstalling the SW using Nokia Suite. Just download it on your PC, and then connect the phone via a compatible USB cable. After that, launch Nokia Suite, and then go to SW Updates > Device Software Update > Reinstall current SW. You can download Nokia Suite from this link: Nokia Suite - Download and Support.
Let us know the outcome.

Aperture 3.5 + Mavericks external storage problems

Aperture 3.5 + Mavericks external storage problems
After upgrading to 3.5 and Mavericks, all my projects referencing files stored on NAS show blurry or black and not responding to edit commands. Sometimes Aperture crashes. The projects/photos were okay before upgrade. Also new projects on NAS show blurry or black or fail totally to import photos. If I move the same photos to the local drive, everything is just fine.
I am using NFS to access the NAS.
Reading through this forum I found some reports of similar behavior from people storing photos on USB external drives.
This seems to be only when referencing files located on an external drive. No problems if files are copied to the Aperture library.
Any similar experience?

Referenced files on a NAS was always an gray area. While it worked for most users most of the time it wasn;t clear that Apple supported the configuration.
The Apple documents on Aperture and non-locally attached drives can be read in a number of different ways. Of course the library definitely had to be on a local drive (and even here some users reported success with the library on a NAS) but referenced masters were never explicitly mentioned either way.
Most users had success with the originals on a NAS but even with earlier version of Aperture and the OS there were always the occasional report of problems. When push-came-to -shove if moving the referenced originals to a local drive fixed the problems there wasn;t much else that could be done.
Since the release of 3.5 and Mavericks it does appear that referenced originals on a NAS do not work at all in most cases. The best we can do here, being just users like yourself, is to suggest you contact Apple and try to get through to the Aperture team and see if you can get a definitive answer.
As for problems with referenced originals on locally connected drives, I'm not aware of any widespread problems. In the few cases I've seen it has come down to some issue with the OP's system.
Having your whole workflow and setup knocked out from under you like this is really bad, unfortunately there isn't much anyone here can do for this problem.
regards

WRT350N & Disk Storage Problem

Hello,
I have the WRT350N which has a USB port on the back to attach external drives/storage. My external unit is a Western Digital My Book II with 750mb of storage.
The drive already has data on it with the drive formatted as NTFS. The drive works perfect with all my computers.
When I attach the drive to the Linksys, the WRT350N does not recognize the drive! I've done the obvious...checked power, cables, rebooted the router.
In the Router control panel under storage, disk, there is nothing listed. "There are no currently available disks".
I've gone through the Linksys automated help and its about worthless for my problem.
Can anyone give me some tips on what is wrong? Again, the drive works fine when connected to the computer by USB..so the drive is fine. Is there some limitation on the size of the external drive?

What firmware are you running?
alien

WRT350n storage link itunes problem

There is not enough room on "\\Linksyswrt350n\all_partitions" to copy all of the requested files. iTunes will copy as many files as possible. I know for a fact that I have plenty of room on the drive. It seems itunes is having trouble getting access to the drive... not sure how to fix this

I just bought the wrt350n. have not hooked it up yet. I plan on putting a mybook 750gb drive on the storage link and putting my itunes library on it. how difficult is this?

WRT350N Storage Password Access in Vista

This might be a known problem 'cause I saw at least one other thread where this was mentioned.
I have a USB drive connected to my WRT350N and a share setup on the router. I can mount the drive locally via "Map Network Drive" and \\192.168.1.1\MyDrive and I can even do it across the WAN using the routers WAN IP. When the drive is mapped I get a password dialog and can mount the drive using user "Guest" with no password.
My problem is that I can't get Vista to accept the passwords for any other accounts than the guest account. I get a "Logon Unsuccessful" message. This includes the admin account. No a big problem for my local network since I can mount drives under the guest account and grant guest access to all the drives fo RW, but not wise for accessing my data across the internet.
Anyone have any ideas - Is this a Vista thing or something that will need to wait for Firmware 2.0 for the WRT350N?
Thanks!
Rob

I have the same logon problem using Vista Home Premium edition.
The is no "secpol.msc" file to edit. Any other options?
````````````````````````````````````````````````````````````````````````````````````````````````````````````
EquallyWrong solved the problem! Thank you!
For anyone else with Vista and WRT350N w/ storage password issues:
http://forums.linksys.com/linksys/view_profile?user.id=61782
Message Edited by larogar on 07-24-2007 04:53 PM

WRT350N Storage problem

Similar Messages

Maybe you are looking for