WRT350N-USB Storage

I have an external drive mapped and working Ok.
However, on the first boot of the computer, I always have to log-in when accessing the storage via Windows Explorer.
Anyway to disable this log-in?
I found the log-in info under the router's Storage/Admin-User Management area. It's not the same log-in as when accessing the router via it's IP.
Tried just leaving it blank, but that doesn't work.
Live Chat said to use the same as my computer's log-in. However, I do not have a pass set for this computer as I'm the only one on it and I don't want to be going thru that routine everytime I turn on the computer. Besides, unless something is changed in the router, I think it would ask for it anyway.
Any ideas? Need it disable it so that camera security software can access it without having to 'log-in' since that software obviously can't do that.
Thanks all.
T.O.

You can try disabling the option under internet explorer "enable anonymous login"
Click OK....
Also delete all files & cookies under internet options ..... delete username & password also ....

Similar Messages

  • WRT350N - USB Storage; How to??

    Hello all,
    This is the first time I have entered this forum! It looks excellent.
    A week ago I bought myself a wireless-N router, the WRT350N. I bought this one because of the excellent reviews and most of all because of the USB-storage link.
    This router works very fine. I have already connected my HP C5180 All In One.
    However, now I want to connect my external hard drive. This is untill now not successfull. I hope someone can help me.
    I'm running:
    - notebook from HP, the DV9870ED with Windows Vista.
    - external drive, a Western Digital My Book Essential Edition 250 GB with USB 2.0. This external HD is not empty. The File System is NTFS.
    When I look 'in' the router I can see my External HD. As far as I know I have shared it. I have not claimed it, because in my opinion it looks like this will erase the HD and it is stored with important data. What is the next step or what are the next steps?
    Please, can someone hand out a tutorial or a step-by-step manual?
    Thanking you in advance.
    Kind Regards.

    Hi,
    NTFS works. No need to reformat, existing data is safe (unless you use Linksys to erase it).
    On the first tab "Disk", have you done "Create Share"?
    On the next tab "Shares", it should show the HD under "Share Name" as "All_Partitions".
    Press "Create New Share", give it a "Share Name" and save.
    You might have to set permissions under "Share Access".
    Under the tab "Administration", set the "Machine Name" and "Workgroup Name" I used the same WG as my network.
    Under "User Management", "User Name / Properties", set a password.
    You can also setup "FTP Server", both local and internet access.
    It's a couple of month since I set mine up.
    Good luck,
    dRdoS7.

  • Wrt350n usb storage- what will it handle

    The doc seems to imply that if you hook a usb disk up, it will have to be reformatted. Is this correct?
    Can I move an existing ntfs file syetem usb disk from a windows xp computer to the wrt350n storage usb slot, and actually access the ntfs data?
    It says it supports multiple disk partitions. This suggests one might support multiple USB disks as individual partitions with a usb hub? Is that correct?
    fyi for you browsers...
    This is a slick feature, the docs could use some fleshing out.
    In searching for an answer to my question, I came across lots of how the heck do you use this (wrt350n storage)- Go to the set up page usually at 192.168.1.1,
    click storage. One of the screens will let you name the "computer", defaults
    to linksyswrt350n or some such (lets say foo), and the windows workgroup
    name to join, lets say "myworkgroup". Also name the partition "mydisk"
    Then computers in Myworkgroup see a network computer named
    \\foo\mydisk\
    good luck...

    Hi,
    NTFS works. No need to reformat, existing data is safe (unless you use Linksys to erase it).
    On the first tab "Disk", have you done "Create Share"?
    On the next tab "Shares", it should show the HD under "Share Name" as "All_Partitions".
    Press "Create New Share", give it a "Share Name" and save.
    You might have to set permissions under "Share Access".
    Under the tab "Administration", set the "Machine Name" and "Workgroup Name" I used the same WG as my network.
    Under "User Management", "User Name / Properties", set a password.
    You can also setup "FTP Server", both local and internet access.
    It's a couple of month since I set mine up.
    Good luck,
    dRdoS7.

  • Setting up WRT350N USB Storage Disk

    Well, I'm about 24 hours from returning this router!  I've setup and encrypted the network with no issues, the storage drive... that's another story!!  I have a WD 320 Gig external that is hanging off of the router.  I've tried to follow the cryptic Linksys help screens to set up the drive, but I'll be (censored) if I can find the **bleep** thing on the network.  Are there instructions out on the WEB or can some sharp network type put into english the secret of making the storage drive visible and available on the internal network?  Any help would be MOST APPRECIATED!!!!
    Ken

    yes..that's right...u need to click on claim disk / claim to format the drive

  • WRT350N FTP access to USB storage

    I have my WRT350N setup.  all computers within my LAN can access my usb storage device.   I can not access my usb storage device using a computer outside my LAN.
    if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
    if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
    my guess is the router is not allowing port 21 to be accessed, but I'm not sure.  Any one know how to fix this problem?

    Upgrade the router with a latest firmware first..
    Once its upgraded reset the router for 30 sec and then reconfigure the router again..
    Open the FTP port 21 on the port range triggering option.
    Basically port range triggering is for the incomming ports and when you try to access the USB from outside LAN then this port 21 will help you with it..

  • WRT350N Mass Storage Compatibility

    I just recently purchased a WRT350N Router with the USB Storage deal and found that my Venus T4U (AMS DS-2340UBK) external drive isn't fully compatible with it. The T4U can have four drives in it, but the router only reads one of them, now the T4U also supports RAID and I'm pretty sure it would work if I raided all of the drives together into one, but I don't want to do that. I know that the firmware for this router uses the a linux kernal, and I can see all of my drives when I plug directly into my linux box, so why can't the router see all of my drives? Is anyone else having this problem? I do hope the next firmware revision resolves this.. is there a bug notification area I where I can let the developers of the firmware know of this issue so that it can be resolved?

    Hmm. I was looking forword to that feature as well! If there is enough interest in it, maybe linksys will work it into a later firmware update. Hopefully!

  • WRT350N USB Drive Max File Size?

    What is the max. file size for the FAT32 USB Drive when attached to a WRT350N?  When I try to transfer a 11.7 GB file to the Drive, the drive "disconnects" after 3.8GB has been transfered.  [Transfer status window shows 7.9 GB remaining to be transfered a the time of disconnect.]  I've tried both the Mapped Network drive and the FTP Sever approaches and get the same results every time.  All smaller files transfer to the WRT350N USB Drive successfully every time.  I using a Windows Vista Ultimate desktop (Wired connection) and the Router has 1.3.02 frimware.
    The symptoms tend to indicate that the max. file size is limited to 4GB?  Is this correct? 

    You will have to format your disk with the help of the WRT350N and after that you will have creat Share with same "Storage" tab on the linksys router.

  • How can I see file with chinese name in Sunray USB storage?

    hi, All
    I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
    I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
    best regards
    xiong wei

    You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
    Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
    To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.

  • USB storage with WRT610N....help!

    After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
    I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop.  Here's the specifics:
    Desktop is an older Dell XPS runnings XP SP3.  Desktop has three logons....for myself and my kids.
    I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
    I have an office laptop and I would like this to access the storage device
    Eventually I will be adding more computers to the network for my kids.
    I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
    Through 3 separate tech support calls, each tech tried a different approach to get this to work.  Nothing worked.  I want to start from scratch....  What is the best way to accomplish what I want to do?  After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
    A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
    Thanks in advance for your help!

    jal4680 wrote:
    After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
    I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop.  Here's the specifics:
    Desktop is an older Dell XPS runnings XP SP3.  Desktop has three logons....for myself and my kids.
    I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
    I have an office laptop and I would like this to access the storage device
    Eventually I will be adding more computers to the network for my kids.
    I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
    Through 3 separate tech support calls, each tech tried a different approach to get this to work.  Nothing worked.  I want to start from scratch....  What is the best way to accomplish what I want to do?  After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
    A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
    Thanks in advance for your help!
    The harsh reality is that the results for people trying to use the Storage Link function have been mixed, at best.  Especially in trying to utilize it for a "backuP' function.  The kernel used to manage the Storage Link is apparently unix/linux based, and has some difficulty playing nice with Windows based backup utilities.  Additionally, there have been reports that the connectivity to the attached devices is, at times, poor.  Finally, there are issues with file corruption (date/time stamps, specifically).  There have been no firmware updates to deal with these issues.  If your primary need is for an attached NAS solution, I would strongly recommend looking at other devices for that solution.

  • My new iPhone 5 won't connect to iTunes, and when I connect to my computer it comes up as a usb storage device, also in the phone itself under usage it shows internal memory of 2gb and sd card 64 gb, is this an original iPhone or have I been sold a copy

    My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • I am trying to add music to my computer and then put it on a usb storage device

    ok i havent used a computer in a very long time and the last time i did things seemed a whole lot easier.  i got a new laptop for valentines day and i still aint figured this thing out. what i am trying to do is add all my music cds to my computer, make some playlists, then download the music to a usb storage device so i can have the music in my truck.
    when i put a cd in my computer it pops up and it starts playing but i have no clue as what to do next. i have tried to make a playlist through the player that pops up and plays the music but aint having any luck. IM CLUELESS!!!! nothing ive tried has wroked, i need help please.
    thank you in advance

    Hi,
             The below link shows how to create playlist in Itunes.  Once the playlist is created, if you are using apple Ipod or any other apple product. Then once you connect the device it will start the sync with the device and then you can start playing.
    http://support.apple.com/kb/PH12340
    If you are using another device, then please do mention the device to which you want to sync the music and which player are using on the system.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

    Hello,
    I have a Windows Server 2012 R2.
    I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
    on it (this machine is also a domain client in the same domain).
    I will really be thankful if anyone can suggest some solution to this issue.
    Please feel free to write back in-case I have missed anything obvious to be shared.
    Thanks!
    -Vinay Pugalia
    If a post answers your question, please click "Mark As Answer" on that post or
    "Vote as Helpful".
    Web : Inkey Solutions
    Blog : My Blog
    Email : Vinay Pugalia

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedbackhere.
    Andy Qi
    TechNet Community Support

  • USB storage devices not being recognised

    Product:
    13" Macbook Pro w/ Retina Display (Late 2013 model)
    OS X Yosemite (version 10.10.2)
    2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
    Issue:
    - macbook unable to recognise USB storage devices.
    - can be found on disk utility but 'greyed out'.
    - cannot be found under devices in finder.
    - tried restarting laptop, no effect.
    - additional storage via Nifty + 64gb micro SD is working fine.
    - apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
    - USB-ethernet adapter appears to be working w/o problems too.
    - last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
    Hello everyone,
    I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
    I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
    I've attached a screenshot of the disk utility below as well.
    If anyone could help me out then that would be greatly appreciated.
    Thanks in advance!

    Some users on another Apple thread had success in running Kext Utility last November with similar issues.
    I ran kext utility 2.6.1, restarted my computer and everything was working again.

  • My Pro freezes when I connect USB storage

    ok so for about a month and a half now, sometimes when I connect a USB storage device, my MBP (13 inch, from the most recent early 2011 line) will freeze. if there's an animation ont he screen, like the time machine symbol, it will keep going, but no response from keyboard or trackpad. at first it happened with a new cheap USB flash stick, so I thought it was that. but since then, once in a while it happens with my time machine USB hard drive, my android phone, and a different USB stick, none of which have had this problem before on anything, including my earlier Macbook from 2008. ideas/causes? this guy seems to have a similar problem: https://discussions.apple.com/message/15088832#15088832

    Hi f,
    Try an SMC Reset: http://support.apple.com/kb/HT3964         

  • How to detect if there is a USB Storage in my pc? VISUAL BASIC 6.0

    Hi sir. 
    my program has a function auto back up.  so i want to detect if there is a usb or not. if there's a usb then it will be save in the available usb storage. if there is no usb it wont save and will pop up a msg box saying "There is no USB device,
    please insert USB to continue back up" VB6 platform
    thank you sir.

    Hi NikkoProgrammer,
    Welcome to MSDN.
    I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
    Where to post your VB 6 questions
    You could consider posting this issue in these forums below:
    These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
    VB Forums
    VB City
    Thanks for your understanding.
    Best Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for