Wrt350n v.1.03.7 firmware dl/install

Has anyone successfully downloaded and installed the 1.03.7 firmware for the WRT350N? I keep getting time outs at around 70-80% complete when I try to get it from FTP site, which is giving me a lame 80k/sec conxn and has committed several unrecoverable timeouts over the past 3 days trying to dl this (745MB ????????????) .tgz file. I'm trying to get something (anything has to be better than the 1.03.2) to work with a linksys wusb300n card and or a dell 1490 a/b/g on a new dell latitude 830 running vista enterprise 32bit. any feedback/suggestions welcome. cheers

The file you are trying to download is the GPL source code. It contains the source code of all the software inside the router. You only want to download this file if you want to compile your own firmware.
You have to select the firmware download link and not the source code link. The latest firmware for your router in the U.S. is 1.03.2.

Similar Messages

  • Must update firmware before installing OSX Tiger on OS9

    I'm trying to bring an iMac G3 with OS9 to life. It's brand new, never been used before, and doesn't yet have internet. I will get internet (Airport Card) soon, but first have a software update problem.
    After starting the iMac, I have inserted the install DVD for Tiger. The computer says it must restart to install, and when it restarts, the computer says it must update firmware before installing. I have to choose a system with which it will start up and my choices are:
    OS9: Hard Drive
    OSX: Install DVD
    My 3rd option searches for a location, and ends up restarting in OS9.
    Every option either results in the inevitable error message that the firmware needs updating or using the OS9 environment.
    I read Apple support saying that firmware needs to be updated to fix this problem. Support suggests updating firmware from the OSX install DVD, but I haven't found such updates on the DVD, and need to overcome the firmware problem.
    Please help, I am anxious to use my computer!
    Thank you!
    iMac G3   Mac OS 9.0.x   updating to OSX Tiger

    Hi, Kristine -
    Welcome to Apple's Discussions.
    You can download the firmware update you need from either of these Apple KBase articles -
    Article #58174 - iMac: When to Install Available Updaters
    Article #86117 - Firmware Updates
    In order to install the firmware update, the machine must be booted to OS 9 on its internal hard drive. It's a good idea to have no external devices connected when you do it, other than the keyboard and mouse. If you can, print out the ReadMe that accompanies the update.

  • I recently got an IMacSnow(G4) and installed a larger HD.  When I try to load 10.4 it gives me a message:  "You must update your computer's firmware before installing MacOS".  Never saw this one before.  What gives?

    I recently bot an IMac Snow G4 and installed a 40G HD.  It has 640 mem. When I try to load Tiger, I got a msg: "You must update your computer's firmware before installing Mac OS".  Never saw this one before.  What gives?

    Hi, is this a G4 Lampshade iMac, or a G3 Snow iMac?
    http://www.everymac.com/systems/apple/imac/specs/imac_600_graphite.html
    http://en.wikipedia.org/wiki/IMac_G4
    Anyway, you'll need OS9  installed to do the Firmware install...
    http://support.apple.com/kb/DL1283
    http://support.apple.com/kb/HT1395?viewlocale=en_US

  • Which Firmware Is Installed?

    I've read many posts about applying the 1.2 firmware updater. How do I find which firmware ver # is currently active on my machine?
    Thanks in advance!
    John

    To find which firmware is installed in your computer:
    1. click on the apple on your left upper corner
    2. click on about this Mac
    3. click on more info
    4.on hardware click on Bluetooth
    the firmware version and every information will be available.

  • I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

    I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
    When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
    I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
    Can anyone help me? Anyone with the same issue?

    Update: I was able to test out the HDMI adapter as well and the same issue occured.  I'm stumped.  10.8.1 maybe.

  • Can you still access Windows partition with open firmware password installed?

    Can you still access Windows partition with open firmware password installed? If so, do you still use the Option key upon restart?

    I don't use Bootcamp.  However, I do know that with a firmware password, pressing the option key at startup will cause the password entry screen to come up; after entering the password, you will get the boot device choice screen.
    So, if Bootcamp partitions normally show up on that screen then it should work just fine, or so I'd imagine.

  • WRT310N V1 - How to fix firmware after installing firmware v2 on v1 hardware. ** SOLVED **

    Hello,
    WARNING! THIS IS AN ADVANCED FIX FOR TECHNICAL TECHS WITH OUT OF WARENTEE ROUGHTERS. IF LINKSYS SUPPORT CAN HELP YOU, USE THERE SERVICES FIRST! THIS PROCEDURE MAY RESULT IF PURMADENT LOSS OF USE OF YOUR ROUGHER. THIS WORKED FOR ME, IT MAY NOT FOR YOU!
    Situation:
    Linksys WRT310n V1
    Power LED on solid
    LAN Ports LED on solid
    Wireless LED off 
    NO RESPONCE AT ALL!
    PC hardware tested (only one is needed):
    Vista laptop gigibit card.
    Vista desktop gigibit card.
    Software to download / install:
    Installed vista TFTP client from control pannel
    download TFTP from linksys
    download firmware from linksys ( Proper firmware for v1 hardware!!!! )
    Method and Procedure:
    Plug in the power and the lan cable to the computer.
    Open a dos prompt start pinging the roughter.
    ping 192.168.1.1 -t -w 5
    No responce is to be expected at this point.
    On the computer open your network connections folder
    Disable ALL OTHER network interfaces! (ALL OTHER)
    open the settings of the lan interfacess.
    disable (uncheck) all options other then tcp/ip v4
    set the manual address of the card to
    192.168.1.10 ip
    255.255.255.0 sub
    192.168.1.1 gate
    192.168.1.1 dns
    now in the network card properties above configure the network card for 10 half duplex speed mine was called line speed and duplex.
    save and close.
    NOTE: Do not release the reset button untill told to! You will need to hold it in for a long time!
    NOTE: when holding the reset for 30 seconds, the LAN port may flash around 5 and 15 seconds, do not pull the power until the lan is off around 25 to 35 seconds of holding  
    On the rougher, with the power on and the lan cable connected. 
    Hold the reset button for 30 secconds you will see the lan cable port turn off arround this point pull the power.
    Hold the reset and wait 10 seconds.
    Hold the reset and power up for 30 seconds until the lan cable turns off around then  
    Ok so with the power off you can release the reset button.
    from now own you can start from here with the reset if first attempts of sending the new firmware to the linksys fails.
    Open a NEW dos prompt.
    type tftp -i 192.168.1.1 put C:\linksysfirmware.bin
    if you hit enter it will fail ... so let it time out... if you did type it again and wait to hit enter.
    while holding in the reset button power on the roughter release the reset after 5 secconds.
    press enter on the dos prompt. you may send this a couple of time arround now it took three tryes to get the "SENT COMPLETE" message from tftp! you will also magicaly see your pings from the other window start working! if working WAIT 2 min before doing anything next.
    If you fail for more then 1 min, unplug your roughter and start the send firmware part.
    ok so it's pinging thats all? yes!
    ok so you waited 2 min, now pull the power normaly and wait 10 secconds return the power with our the restart! start it normaly.
    after 20 secconds the roughter should be able to ping ... nothing else yet!
    use the Linksys TFTP program now ... and install the full firmware to the roughter!
    when the message says firmware complete wait two min then pull the power and reboot.
    DONE! 
    Solved!
    Go to Solution.

    [email protected] wrote:
    Hello,
    WARNING! THIS IS AN ADVANCED FIX FOR TECHNICAL TECHS WITH OUT OF WARENTEE ROUGHTERS. IF LINKSYS SUPPORT CAN HELP YOU, USE THERE SERVICES FIRST! THIS PROCEDURE MAY RESULT IF PURMADENT LOSS OF USE OF YOUR ROUGHER. THIS WORKED FOR ME, IT MAY NOT FOR YOU!
    Situation:
    Linksys WRT310n V1
    Power LED on solid
    LAN Ports LED on solid
    Wireless LED off 
    NO RESPONCE AT ALL!
    PC hardware tested (only one is needed):
    Vista laptop gigibit card.
    Vista desktop gigibit card.
    Software to download / install:
    Installed vista TFTP client from control pannel
    download TFTP from linksys
    download firmware from linksys ( Proper firmware for v1 hardware!!!! )
    Method and Procedure:
    Plug in the power and the lan cable to the computer.
    Open a dos prompt start pinging the roughter.
    ping 192.168.1.1 -t -w 5
    No responce is to be expected at this point.
    On the computer open your network connections folder
    Disable ALL OTHER network interfaces! (ALL OTHER)
    open the settings of the lan interfacess.
    disable (uncheck) all options other then tcp/ip v4
    set the manual address of the card to
    192.168.1.10 ip
    255.255.255.0 sub
    192.168.1.1 gate
    192.168.1.1 dns
    now in the network card properties above configure the network card for 10 half duplex speed mine was called line speed and duplex.
    save and close.
    NOTE: Do not release the reset button untill told to! You will need to hold it in for a long time!
    NOTE: when holding the reset for 30 seconds, the LAN port may flash around 5 and 15 seconds, do not pull the power until the lan is off around 25 to 35 seconds of holding  
    On the rougher, with the power on and the lan cable connected. 
    Hold the reset button for 30 secconds you will see the lan cable port turn off arround this point pull the power.
    Hold the reset and wait 10 seconds.
    Hold the reset and power up for 30 seconds until the lan cable turns off around then  
    Ok so with the power off you can release the reset button.
    from now own you can start from here with the reset if first attempts of sending the new firmware to the linksys fails.
    Open a NEW dos prompt.
    type tftp -i 192.168.1.1 put C:\linksysfirmware.bin
    if you hit enter it will fail ... so let it time out... if you did type it again and wait to hit enter.
    while holding in the reset button power on the roughter release the reset after 5 secconds.
    press enter on the dos prompt. you may send this a couple of time arround now it took three tryes to get the "SENT COMPLETE" message from tftp! you will also magicaly see your pings from the other window start working! if working WAIT 2 min before doing anything next.
    If you fail for more then 1 min, unplug your roughter and start the send firmware part.
    ok so it's pinging thats all? yes!
    ok so you waited 2 min, now pull the power normaly and wait 10 secconds return the power with our the restart! start it normaly.
    after 20 secconds the roughter should be able to ping ... nothing else yet!
    use the Linksys TFTP program now ... and install the full firmware to the roughter!
    when the message says firmware complete wait two min then pull the power and reboot.
    DONE! 
    hi 
    i tried ur all steps but couldn't success, and the different thing is my when I connect my wrt310n to computer I show the IP 169.254.*.* is there any different steps for it. plz help me.

  • How to tell if SMC firmware is installed properly...

    Hi
    I live a bit far from my Apple Store so I thought I'd ask on the forum before I did the whole Genius Bar - back- and - forth trip.
    I recently had my logic board replaced along with a rattling fan.
    After which i found my MBP (2.16 core duo from last july) to run much quieter and cooler. I noticed that my fans came on more often and heard them come on.
    Everything seemed fine. Then I had my bottom casing replaced (because of a scratch I found after having my logic board replaced -- which i wasn't too happy about but AppleCare helped me out).
    After picking up my MBP again. It seems like the fans dont come on as often anymore and the temperatures are as high as it was before i got my logic board replaced--but i don't hear a noise.
    Would anyone know if there is a way to check if the SMC firmware update is properly installed? I am wondering why the fans dont come on as often . I've been using SMC fan control lately which helps but I would rather my MBP control its own temperature without me having to adjust the fan speeds. It woudl be most helpful when running programs in Windows XP bootcamp mode.
    Any advice would be great thanks.
    Love O.

    If it helps to know the fan speed, you might try Hardware monitor: http://www.bresink.de/osx/HardwareMonitor.html
    The fans could be running at low speeds, in which case it's very soft. To really hear it, you can add load, say by opening a terminal and running
    yes > /dev/null
    That should use up CPU, raise temperature, increase fan speed and you should be able to hear it. If the max temperature is much higher than before or the fans really don't get switched on, then I would talk to Apple.

  • Macbook pro EFI Firmware Update install problems

    i just finished downloading the recent macbook pro EFI Firmware Update. When the computer restarts, the computer runs for 30 sec and restarts again and repeats. I shutdown the computer and turn it back on again. i check updates and shows that i have to update macbook pro EFI Firmware again! same version.
    I checked my preferences on Software Update and went to Installed Software tab. Shows two macbook pro EFI Firmware 2.1 Updates installed.
    Anyone experience this?

    i checked system profiler boot room version is MBP81.0047.B04
    Ps. thanks for the response
                                                                                                                                            N8 the Fn' Gr8

  • N78 firmware re-instal reports 'hardware error'

    Hi there!
    I looked for an update to my N78 (RM-235) firmware (12.0.46) today because the application installer in the phone reported failed installation of Joikuspot software.
    NSU told me I had the latest available firmware, but could reinstal if I wanted - so I proceeded to do just that to see if it helped...
    During the reflashing via USB cable there were messages at two points stating there had been a "problem with the device hardware - it might not work properly" -- or words to that effect.
    Is this anything I should worry about? Maybe send the phone (1 month old) back to the carier (Virgin Mobile Australia)?
    It seems to be working alright after the firmware installation, but you never know...
    Cheers,
    LMH
    NB: the joikuspot software again failed to install after the reflash

    There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
    http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
    and here
    http://forums.appleinsider.com/archive/index.php/t-8096.html
    My opinion is that partitions cam be useful when:
    1. the OS can't manage big volumes (as it was in the past)
    2. the OS can't optimize the space on big volumes
    3. want to install 2 or more separate OSes
    4. organization (like in your case).
    Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
    So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
    About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
    Thanks for the beer!
    cheers
    rob

  • Did not update firmware before installing tiger now imac wont turn on....

    I bought tiger for my imac dv g3 400mh computer and bought additional memory from crucial so that it would load on.
    I got a message on screen saying that I needed to update firmware and to restart my computer which I did and now it will not turn on. The power button is on but the screen is blank.
    I have read an article posted on here and I tried everything (the sleep/wake trick)etc but it still will not work.
    any help will be appreciated.
    joby

    Welcome to Apple Discussions!
    Fortunately your Mac has a VGA port in its back panel, which should work to connect an external display while you apply the firmware after the fact. So find someone who has a VGA display, and download this firmware update and apply it while booted off the hard disk.
    http://www.info.apple.com/kbnum/n75130
    It is only the internal display which goes dark if the firmware was not applied before attempting to install 10.2 or later.

  • Z1 wont start after stick firmware was installed

    I had some problems with the current version of my Xperia Z1 and decided that I needed to install the stock firmware. I downloaded the standard and advised Flashtools and installed the stock firmware. After attempting to turn the phone on, the following screens appeared. The "Sony" logo appears, then the "Xperia" logo appears, and then the swirly ribbons move from left to right on the screen, and suddenly they stop moving and it goes back to the "Sony" logo screen and the entire process repeats. I don't really know what to do now, either to install a different firmware or maybe is there a program that resets the phone by simply connecting it to the USB. The problem is, the phone wont start. Help will be highly appriciated.

    Download SUS:
    http://www.sonymobile.com/gb/tools/update-service/
    Charge the phone for at least 2 hours,repair with SUS.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • WRT350N v2.1 bricked after firmware upgrade - what to do now?

    Hi,
    I bought the European version of WRT350N v.2.1 (S/N Q10H401385). The router was very unstable (it was repeatedly hanging after few laptops were connected), so I decided to flash newer firmware. Unfortunately, I did not check that the firmware version 2.0.19 wich I found on the Liksys site is for v.2.0 - and after flashing it over 2.0.17 the device is completely dead. It does not answer for  pings. I tried to reset it with the 30-30-30 method. No luck either. I noticed only that if I keep the reset button during a few seconds and then release it when the router is powered on, the power diode begins to blink in yellow. 
    The device is only a few months old. Please advice, what can I do now? Can be the router repaired somehow, and does the warranty applies in such an instance?
    Many thanks in advanr  for any hint or reply.
    Best,
    Dianthus

    Hi, yes you did exactly the same. Unfortunately, I couldn not find any solution, besides quite advanced technically - the router must be disassembled, some special cables attached and the system recovered at the very basic level.
    I decided to return it to my vendor - I desribed the problem and waited 2 weeks for an answer. The router has been not returned, and I have got the cash back. 
    Perhaps it is the best option also for you. 
    Btw. I have got enough money to buy DLINK 655 and now I am totally happy with it. This Linksys we speak about was certailny not a good device, and I found many complaints in the net on it. 
    Unfortunately, in my case the lock-ups hve had worse consequences than just some troubles at home - I have used it as the wifi device during a meeting, and the connections was just very bad. But at that time, I could'nt know that the device is faulty, and it seems that all the line of these routers are broken somehow.
    Good luck,
    Dianthus

  • Any secret to getting 1.2 TB firmware to install?

    What's the secret to getting the Thunderbolt Display 1.2 update to install?
    I do have a couple of TB drives between the computer and the Display - could that be a problem?
    I've also tried with the lid of my MacBook Pro open (as noted in another thread).
    Any suggestions?
    Thanks,
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

    That worked!
    Now you've 10 points, Steve - use them wisely!
    Thanks,
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Should I update BIOS and hardware firmware when installing XP?

    I will soon be receiving a ThinkPad R61 and I plan to downgrade the OS to Windows XP by following this guide to the letter.  However, one part of the guide is unclear to me.
    It states that updating the BIOS and hardware firmware are optional.  How do I decide whether I should do this?  What are the consequences of not doing it?  How badly can I damage my computer by doing it incorrectly -- can I destroy it?
    Thanks! 

    As it says in the guide many times.
    "THE BIOS AND THE HARD DRIVE FIRMWARE UPDATE ARE
    NOT NECESSARY. IF YOU ARE WARY OF BIOS UPDATES, THEN I SUGGEST YOU SKIP
    THOSE TWO UPDATES AND CARRY ON WITH THE GUIDE."
    The BIOS updates sometimes fix errors that may or may not affect you. You would have to read the txt file associated with it to determine if you want to do it or not.  Some folks have to have the latest and greatest and some people have issues that are fixed in the BIOS update.
    A BIOS update gone wrong will render your Thinkpad completely useless.
    I think that if it is not broken, don't fix it.
    Be sure to make the recovery disc set before doing anything else.
    T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
    T400 2765-T7U Windows 7
    Registered Linux User #160145
    FYI: I am not employed by Lenovo

Maybe you are looking for