WRT400N setup.exe has stopped working

I just got a brand new HP Pavillion desktop with Vista 64 and I am having installation issues. Every time I put the setup disc in the drive it fails to load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried skipping the autorun and going in to my rom drive and manually selecting the setup.exe file. The initial splash screen appears and says please wait loading but I never get any farther than that because the program locks up. I thought maybe the disc was defective but I have tried it on an XP desktop and an XP netbook and the disc works fine on both of those. What gives? I have searched this entire forum and it seems like I am the only person having this problem. Is my new computer defective or is it the user
Solved!
Go to Solution.

Is the new Vista Dekstop is wired computer or wireless computer ?
Are you able to go online with the other wired and wireless computers ? If yes then, you do not need to run the CD anymore on the VIsta Dekstop.
If the new Vista dekstop is wired computer then, just connect the eternet cable from the computer to the router on one of the 4 eternet port and restart the computer and it should be able to go online.
If the new Vista dekstop is wireless computer then, try to locate your network and connect it using the secuity key(if the network is secured)...It should work !!!

Similar Messages

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Satellite A300D - Upgrading from Vista - "Setup.exe has stopped working"

Hello,
I am using Satellite A300D with Vista and I have been trying to upgrade to Windows 7 using the Toshiba Upgrader.
After choosing the language and proceeding with other steps, it asks me to uninstall a bunch of programs. Some are uninstalled just fine but when it comes four other programs it says "Setup.exe has stopped working" and it does not uninstall.
I have tried uninstalling them manually but I got the same message.
These programs are;
Atheros Driver Installation Program
Toshiba Hardware Setup
Toshiba Supervisor Password
Realtek High Definiton Audio Driver
As a result I cannot proceed with the upgrade.
Anyone know what the issue might be?
thanks in advance,
Can - TR

I am having the exact same problem. I have the toshiba satellite 350D. I am only stuck at the atheros driver installation program. As soon as it's supposed to be uninstalled I receive the " setup.exe. has stopped working" I tried uninstalling manually as well and get the same message.
I think the only fix would be to reinstall vista and then try upgrading to windows 7 again. I would like to stay away from reformatting though.
I would love an answer to this question as well!! (frustrating)

Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
Any ideas on how I can load the creative Zen V software>
Thanks,

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Configuration of OIM on windows 7 fails with "setup.exe has stopped working

I have tried everything I can think of and I can't run the config.bat for OIM. OID OVD etc installs and works fine.
Windows 7 Professional 64 bit
8GB memory
I can't believe I'm the only one. If anyone has a suggestion. Thanks

Peter,
The higher-tiered (supposedly) Tech had me go to that Web page and follow those instructions earlier this week. I followed all of them, and still had the same problem. That was when she told me that the problem is because my laptop is connected to a Domain (see first post).
4/15/10 Update: My IT support gave me the password to log onto my laptop using the Administrator logon. This login is not connected to our Domain because it is used by our IT folks to troubleshoot problems with the laptop itself. I installed only Acrobat, RoboHelp, and FrameMaker from this login last night. Then I opened Acrobat 9 and "updated" everything. RoboHelop 8 now works (and it is accessible from my regular login), but FrameMaker is now giving an error message, something about the dictionaries, and it does not open. Here is the error dialog being thrown now by FrameMaker 9:
I have updated my case with this info and the screenshot of the error dialog. If you know what is causing this error in FM, please let me know what to do to fix it.
Thank you for your help!
Marlo

TS3989 Photostream.exe has stopped working. What causes this?

I keep getting the message that "Photostream.exe has stopped working" on my Windows PC. What is causing this and how do I fix it?

What seems to have worked for others (so far) is to uninstall iCloud, and then reinstall it from http://www.apple.com/ca/icloud/setup/pc.html

ScenarioEngine.exe has stopped working when trying to install sqlserver 2014 Express with tools.

I have downloaded the enu file from MS, for the above SQLServer 2014 express edition.
After checking that all the prerequisets had been met, I extracted the files, from the enu, to a folder and ran the Setup.exe.
Immediately, I received the warning "The ScenarioEngine.exe has stopped working" and the installation stops.
I did not encounter this issue installing SQLServer 2012 Express with tools, on the same pc, and it has been running without any issues,
The pc concerned is running Windows 8.1.

SQL Server 2014
1. Save the following in a text file, change the extension to .reg, double-click on the file, and on the prompt that appears, select yes to populate the registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap]
"BootstrapDir"="C:\\Program Files\\Microsoft SQL Server\\120\\Setup Bootstrap\\"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap\Setup]
"PatchLevel"="12.00.2000.80"
2. Next, copy the following files and folders from the media to the specified destinations:
File/Folder in media
Destination
X64/X86 folder (depending on what architecture you want to install)
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Setup.exe
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Resources folder
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Next, re-run the setup, and it should proceed beyond the point of error this time.
As always, comments/suggestions/feedback are welcome and solicited.

Sqr.exe has stopped working

Hi Experts,
I came across sqr.exe has stopped working error message while executing sqr programs through command line as well as production reporting studio,
For some of the programs No such error,and for some programs its complaining above error after producing output.
Could anybody help me in resolving this error.
Installed epm 11.1.2.3 in windows server 2008 64 bit and using SQL Server 2008 database.
Thanks,
Aravind

found the reason for app crash. Its due to command "USE database_name" in the begin-setup section. I dont know why its causing issue .It si supposed to work for Sybase and SQL Server database but not working with SQL Server. Anyways I have commented that and made it work.

Cannot install Office 2013: Microsoft Setup Bootstrapper has stopped working

I have been trying to install Office 2013 and get this error. Microsoft Setup Bootstrapper has stopped working. Full details are below.
The version of office I am installing is
en office professional plus 2013 with sp1 x86 and x64
The error log shows:
2014/11/04 16:10:55:382::[7440] Cannot start standalone OSE. from <path>\en_office_professional_plus_2013_with_sp1_x86_and_x64_dvd_3928186\x86\proplusr.ww\ose.exe. Error code: 0x80070102
2014/11/04 16:10:55:382::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[7440] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:398::[4744] WER element [P4] is set to value [UnexpectedError]
2014/11/04 16:10:55:398::[4744] WER element [P7] is set to value [UnexpectedError]
2014/11/04 16:10:55:398::[4744] WER element [P6] is set to value [Unable to select Source Engine process to start, see debug level logs for detail]
2014/11/04 16:10:55:398::[4744] WER element [P6] is converted to [C6F06531]
2014/11/04 16:10:55:398::[4744] Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
2014/11/04 16:10:55:413::[4744] Catalyst execution finished: 11/04/2014 16:10:55. Return code: 30088. Exception caught: UnexpectedError.
2014/11/04 16:10:55:413::[4744] PERF: TickCount=4546680 Name=RunSetup Description=End function
The error window shows:
[Window Title]
Microsoft Setup Bootstrapper
[Main Instruction]
Microsoft Setup Bootstrapper has stopped working
[Content]
Windows can check online for a solution to the problem.
[V] View problem details [Check online for a solution and close the program] [Close the program]
Problem signature:
Problem Event Name: OfficeClassicSetup
SETUP EXE VERSION: 15.0.4454.1000
SETUP DLL NAME: OSETUP.DLL
SETUP DLL VERSION: 15.0.4569.1503
ERROR CODE: UnexpectedError
MSI HRESULT: Unspecified
ERROR DETAILS: C6F06531
FIRST ERROR CODE: UnexpectedError
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I managed to fix this... here’s what I did:
I extracted the MSDN ISO to my downloads folder
I created an office 2013 config file with logging set to verbose and copied it to the x64 installer directory
I ran the installer and looked in my temp folder (c:\users\rob.henwood\AppData\Local\Temp)
The log file created said “Cannot detect OSE Service”
I found the OSE Service in the setup folder from the ISO
I looked on another machine and found where it is installed then copied the registry settings for the OSE service.
I restarted the machine and found the Office 64 Source Engine service now existed. I started the service.
I ran the Office installer again and it all worked OK!
Steps to fix:
Create a folder for OSE
C:\Program Files\Common Files\microsoft shared\Source Engine
Copy the OSE.exe file to that folder
Open the OSE.reg file (shown below) and apply the registry settings in that file to your registry
Restart your machine
Open services (services.msc) and see that Office 64 Source Engine is installed
Start the service
Try installing Office 2013/Visio 2013.
OSE.reg:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ose64]
"DisplayName"="Office 64 Source Engine"
"Description"="Saves installation files used for updates and repairs and is required for the downloading of Setup updates and Watson error reports."
"Type"=dword:00000010
"Start"=dword:00000003
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):22,00,43,00,3a,00,5c,00,50,00,72,00,6f,00,67,00,72,00,61,00,\
6d,00,20,00,46,00,69,00,6c,00,65,00,73,00,5c,00,43,00,6f,00,6d,00,6d,00,6f,\
00,6e,00,20,00,46,00,69,00,6c,00,65,00,73,00,5c,00,4d,00,69,00,63,00,72,00,\
6f,00,73,00,6f,00,66,00,74,00,20,00,53,00,68,00,61,00,72,00,65,00,64,00,5c,\
00,53,00,6f,00,75,00,72,00,63,00,65,00,20,00,45,00,6e,00,67,00,69,00,6e,00,\
65,00,5c,00,4f,00,53,00,45,00,2e,00,45,00,58,00,45,00,22,00,00,00
"ObjectName"="LocalSystem"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ose64\Security]
"Security"=hex:01,00,14,80,8c,00,00,00,98,00,00,00,14,00,00,00,30,00,00,00,02,\
00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
00,00,02,00,5c,00,04,00,00,00,00,00,14,00,9d,01,00,00,01,01,00,00,00,00,00,\
05,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,\
00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,00,\
00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,01,01,00,00,00,00,\
00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

CDPdrv.exe has stopped working/responding

I have installed Cisco's IP Communicator v7.0(2) on my laptop in a lab environment. It registers to my CME running on a 3825 fine. I have enabled video support and launch Video Advantage. I can see video, and everything looks fine so far. I have not yet setup another camera and PC to test. My machine is Vista Business Edition. After a few minutes, I get a message that pops up and states something to the effect "CDPdrv.exe has stopped working". ??? Anyone seen this? I was going to try and verify this is just a Vista problem, but it runs way too slow on my XP VMWare machine to make it worth trying.
Regards,
Scott

I'm having the same issue as well. On a vista laptop I get "CDPdrv.exe has stopped working" just after installing UVA 2.1.2 on a laptop that already had IP Communicator 7.0.2.0 installed.
In this order...after getting the error the first time.
1) I uninstalled UVA.
2) I uninstalled IP Communicator.
3) I restarted my laptop
4) I installed IP Communicator, started it, and then restarted.
5) I installed UVA, started it, and then restarted.
6) I started to see the "CDPdrv.exe has stopped working"
If I choose "close the program" I am alerted of this issue a few minutes later. The service continues to crash and UVA does not seem to understand that I have IP Communicator installed...
I can use this setup without any issues with the IP phone hardware, it's just after I add IP Communicator (softphone) to the mix that I start getting errors.
I talked to a TAC engineer who told me that this was a "known issue" but did not elaborate...I'm waiting to hear back.
~Mike D

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Photo Stream PC-error message "applephotostreams.exe has stopped working" and now additional photos that I want to upload is not uploading.

I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?

I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?

ApplePhotoStreams.exe has stopped working on Windows 7 x64

same as the title.
The message "ApplePush.exe has stopped working" appears for a long time, and today, a new message "applephotostreams.exe has stopped working" appeard.
I using Windows 7 Ultimate x64 Chs on HP Z800 workstation.
How can I fix this?

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

WRT400N setup.exe has stopped working

Similar Messages

Maybe you are looking for