WRT400N won't pull internet IP after reboot unless factory defaults are used

OK, so as of late, if the power is pulled from my WRT400N, the router will not obtain an internet IP address at all until you reset the router to factory defaults.  Any ideas why this is happening?

I would suggest you to try upgrading/reflashing the router's firmware.After upgrading the firmware reset the router,power cycle it and re-configure the router from scratch.

Similar Messages

  • I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

    I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
    OS X 10.10.1. 
    Safari Version 8.0 (10600.1.25.1)
    WiFi router connects with mail but not Safari

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • IPod Classic won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore?

    iPod won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore? Is anyone else familiar with this problem? It had over 25 movies, thousands of songs & hundreds of pictures, and it seems like they're still on there, because 74gb are used out of the 80 but when I turn the ipod on it appears to be at factory, fresh out of the box settings and my computer wont recognise it at all...

    For the following suggestion, when you connect the iPod to the PC, and iTunes open up, please close it, before you fix the drive.
    Your iPod hardisk filesystem is corrupted, and maybe repaired by using command line, under DOS window.
    chkdsk drive: /F
    where drive: is the iPod ID D: or E:
    You can also try clicking the IPod properties, and run error checking in GUI, tick  "fix all error."
    If you have access to a Mac, you can use DiskUtility, and run FirstAid to repair the iPod.
    Good Luck!
    BTW, this problem arise because, iPod did not complete, closing, the Sync process, due to timeout, for Windows systems, I think it is maybe caused by Antivirus, or some other plugins, trying to make windows 7 look like Mac OS X.

  • Won't wake up even after rebooting

    i have a mocbook pro 2.5GHz core 2 duo run on OS 10.5.8
    i put it to sleep by closing the lid and it won't wake up
    even i rebooted it.
    can hear DVD drive and hard drive running, black screen, no power on USB drives, caps lock light never light up.
    put os reinstall disk to the optical drive, disk is spinning but nothing happen.
    any idea?

    Part of this time may involve attempting to read a damaged sleep image file, bewlatbrutha.
    You should note, too that the batteries in these computers have a built in microprocessor of their own to try to prevent them from being damaged by discharging too deeply. If you discharge to the point where even the battery's own processor has to shut down you may never be able to resurrect your battery without outside help (and sometimes not even then). Almost all Lithium Polymer and Lithium Ion batteries (regardless of what they are fitted to) have this sort of protection. The battery has to have a certain minimum charge at all time to keep its own processor running.
    Even without reaching this point it is not good for Lithium batteries to be regularly discharged to the point where the computer has to sleep or shut down. You risk severely shortened battery life if you do this regularly.
    Cheers
    Rod

  • Windows 7 64bit freezing in normal mode even after rebooting to Factory Mode?

    Hey guys, my Windows 7 64 bit laptop recently began permanently freezing after a few minutes
    after logging into normal mode, ultimately forcing me to turn the laptop off with the power button.
    It only works in safe mode :(
    Ive tried restoring to an earlier date and i even rebooted to factory mode TWICE. When i booted it
    to factory mode, it would work normally for about a day and then permanently freeze again for good.
    I have heard that maybe this may be a cause of the newest Windows 7 update or maybe something
    wrong with my BIOS...? It worked perfectly until recently. I have 2 red flags in the action center:
    1. "Turn on Windows Security Center service (important)"
    2. "Windows will install updates as scheduled (important)"
    I kept having to postpone the update message over and over and then when i left the comp idle for a while,it crashed and froze AGAIN. Can anyone help me?
    I have college finals due soon and desperately need my computer functioning :(

    Please provide us with your Event Viewer administrative logs by following these steps:
    Click Start Menu
    Type eventvwr into Search programs and files (do not hit enter)
    Right click eventvwr.exe and click Run as administrator
    Expand Custom Views
    Click Administrative Events
    Right click Administrative Events
    Save all Events in Custom View As...
    Save them in a folder where you will remember which folder and save as Errors.evtx
    Go to where you saved Errors.evtx
    Right click Errors.evtx -> send to -> compressed (zipped) folder
    Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
    Wanikiya and Dyami--Team Zigzag

  • Why Won't Launchctl Load Script After Reboot?

    Hello,
    iMac with OS X 10.7.3
    root# ls -lah /Library/LaunchAgents/dbase_backup.plist
    -rw-r--r--  1 root  wheel   479B Feb 24 10:24 /Library/LaunchAgents/dbase_backup.plist
    I load it with:  root# launchctl load /Library/LaunchAgents/dbase_backup.plist
    Runs fine until reboot.
    Any idea how to make this to load automatically after a reboot?
    NOTE:  I originally posted at https://discussions.apple.com/thread/3820415?start=0&tstart=0.  But, we couldn't resolve the issue.  Any new ideas here?
    Thanks!

    Hi,
    i was on same trouble.
    i has found this in console:
    16.09.13 17:31:38,960 com.apple.launchd.peruser.501[183]: (com.myscript.track[39511]) Exited with code: 1
    so i have added error logging to my plist and found the problem in /tmp/matrack.err:
      <key>RunAtLoad</key>
      <true/>
      <key>StandardErrorPath</key>
      <string>/tmp/matrack.err</string>
      <key>StandardOutPath</key>
      <string>/tmp/matrack.out</string>
    </dict>
    hope this helps.

  • 11gR1 1 node won't join the cluster after reboot.

    This is a high level description of a problem.
    We usually run a two node cluster.
    This week we had an issue where one node needed to be taken down. It became non responsive and upon reboot the other node no longer functioned correctly.
    So one node was left running until the maintenance window.
    Apparently when it's brought back up it has the MAC of the second node in the arp cache.
    This leads to node1 not being able to join the cluster.
    I've seen workarounds that involve refreshing the arp cache but is there anything else to this?

    This is a high level description of a problem.
    We usually run a two node cluster.
    This week we had an issue where one node needed to be taken down. It became non responsive and upon reboot the other node no longer functioned correctly.
    So one node was left running until the maintenance window.
    Apparently when it's brought back up it has the MAC of the second node in the arp cache.
    This leads to node1 not being able to join the cluster.
    I've seen workarounds that involve refreshing the arp cache but is there anything else to this?

  • WRT54G Would connect to internet only after rebooting

    Keeps randomly disconnecting from internet. reseting works sometimes, sometimes you have to manual reset ips from provider. today disconected everyone from net and would not come back. It works fine for 1 computer but not others...Help? wont log into 192.168.1.1, wireless wont work. Any suggestions? Thanks!
    (Mod note: Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 12-07-2008 09:44 AM

    Don't click on the above link...Instead click here and select the correct version of your router, download the firmware and upgrade it...
    Once you are done...reset your router :
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    5. Re-configure your router.

  • Display not working after Skype update - won't come back on after reboot

    New to Skype, downloaded upgrade to my desktop last night, installed and was working. Rebooted as requested, and the display will not come on at all, stays black. I can hear Windows 7 booting up and getting to password, but I can't see it or do anything with it.

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • Still won't start up even after rebooting

    Whe I opened my Macbook pro, all I saw was a white screen with a gray colored apple symbol and a spinning wheel. Tried several times to reboot it by turning the power off for 10 sec. and also holding down Apple/S until it checked all files and "Appears ok"  and entered reboot. Still no changes. Anybody please help me out? thanks!

    Did you try restarting it with the original DVD that came with your iMac?  if so what happen?

  • My iPod Classic 80Gb won't sync with iTunes after "Restoring" to factory settings

    My iPod Classic is probably about 8 years old, or maybe a little more and has never before given serious problems. Until I recently "restored" the device, the hard drive had about 40Gb of music and podcasts stored on it but no photos or videos.
    The device recently just "died" completely and without warning - just a blank screen with no response from any of the controls.  I rebooted it using the "Menu" and "Select" buttons and it came back to life. However as it had recently been displaying some other small issues like having to be manually ejected every time after syncing, instead of automatically saying "it is now safe to disconnect" as it always used to, I thought I'd restore it to its original factory settings and then reload my catalogue.  Big mistake!
    Now when I connect the device, it won't automatically sync as it always used to; and when I try to manually sync it either from the "Sync" button at the bottom right hand corner of the iTunes screen or by right-clicking on the device's icon in iTunes and selecting the "sync" option, the iTunes banner simply states "iPod sync is complete" and "Eject before disconnecting" with no data being loaded.
    My computer is a Windows 7 PC running the latest version of iTunes (11.3.1.2) and the iPod device software is up to date (version 1.1.2). <my windows updates are carried out automatically.   I have worked my way through the iTunes diagnostics pages, but to no avail.
    Any assistance in resolving this issue would be much appreciated.

    You would have to update you Mac os.
    It is clear:
    System requirements
    Mac computer with USB 2.0 port, Mac OS X v10.5.8 or later, and iTunes 10 or later4
    PC with USB 2.0 port; Windows 7, Vista, or XP Home or Professional (SP3) or later; and iTunes 10 or later4
    Internet access required; broadband recommended; fees may apply"
    http://www.apple.com/ipodnano/specs.html

  • My download of new Firefox apparently successful but screen- after rebooting - says I am stil using the old version of Firefox -Help.

    See trouble shooting information for details. Not clear what the distinction is between "details" and "trouble shooting" information - unless troubleshooting is for those who might suggest fixes.

    Help Menu -> About Firefox
    * which version is being displayed now ??
    -> [[Uninstalling Firefox]]
    * DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
    * Restart your system
    -> Download latest Firefox version from one of these links using some other Web Browser:
    * http://www.mozilla.com/en-US/firefox/new/
    * http://www.mozilla.com/en-US/firefox/central/
    * http://www.mozilla.com/en-US/firefox/fx/
    * http://www.mozilla.com/en-US/firefox/all.html
    -> [[Installing Firefox on Windows]]
    Check and tell if its working.

  • I can't install after reseting to factory defaults

    My 3 day AirPort Extreme stopped working, after I connected another router with the same SSID. So I decided to reset it to factory dafults. I followed all the steps, and I guess it worked.
    But, when I got to set up again, my iPhone can't find it. When I first set it up, it was working fine and my phone recognised it instantly.
    It's the AirPort Extreme 802.11ac, and the model is: A1521

    On the iPhone, go to Settings > General > Reset > Reset Network Settings.
    Enter the device passcode, then confirm.
    You will need to connect to your network again.

  • Hard disk bad sectors gone after reset to factory defaults.

    Hi,
    I have HP DV6 6c19tx. a couple of days ago i noticed extreme slow startup time in my laptop; like 20 minutes. Once logged in it took another 20-30 minutes to let me click anything. I openned the task manager but no process was taking extra ordnary memory or processor. I openned HP Support assistant to troubleshoot and it showd me errors in SMART Check. which means my HDD is dying but to bad sectors. I ran the Seagate tool for HDD analysis and it also showed errors in SDST. which confirmed me that my HDD is about to die. I took the laptop to the retaler as my laptop is still in warranty. from the BIOS diagnostics he tried to run the HDD tests and it failed showing some error numer 303 or 305. He asked me to take ackup of all the data so that he can order a replacement for HDD.
    I took the laptop back to home to take the backup. after copying all the data, i wanted to remove all personal contents from the laptop so i thought y not to reset it to factory defauls. I reset it t fatory defaults and unexpectedly the system started working perfectly fine. I ran all the test that previously showed error, they all were passed; no HDD error.
    Now am confused what happened here, some one please suggest me if i still need to give it to the retailer to claim the warranty. was is some kind of virus that got removed after reseting the sestem or what. 

    I know it's been a while since you posted your question, but I've recently had an issue with some SMART software claiming that my hard drive was going to fail.  After doing some research, I discovered that there's a virus that will do this to your computer.  It eventually causes you to lose access to all of your files and you'll be unable to use your hard drive.  
    My question on this is why in the world would this program exist?  There's nothing to be gained from creating a virus that just causes your hard drive to poop out.  I'd be willing to bet that it's something the manufacturer has created that forces either a new computer purchase or a new hard drive purchase.  It also could possibly be just some dirty butt psycho dreaming of ways to cause problems for people instead of getting a real life.
    In any case, it's a virus.  Your hard drive is probably fine now.  Re-initializing the hard drive most likely wiped it out.  

  • Can't remove U2 album - even after reset to factory default

    I noticed today that I got the U2 album download on my iPad.  Ok, I didn't have auto downloads turned off.  However, this is a bear to get rid off.
    The U2 album does NOT show up on my Mac iTunes, it does not show up in my apple account so there is no way to hide it.
    it only shows up on my iPad. (I didn't bother to check my iPhone but i am sure it is there too).
    I have been reading through all these forums but there seems nothing I can do.  I just reset the iPad to factory setting and reloaded everything.
    I still have the U2 album showing up as being purchased and ready to be downloaded from the cloud.
    On the iPad reset I did not enable iCloud and I will not.
    I simply can't believe that Apple did this - it is almost like having a virus on the system.  I hope they come up with a fix to remove this from those that did not request it.  I am disabling iCloud from all my devices due to this.  Ok I know this is a bit drastic but I am disappointed that they did this.
    Thank you Apple.

    Rremoved it from my iPhone just fine.
    Never downloaded it onto my iPad.
    http://www.macworld.com/article/2607112/how-to-hide-the-free-u2-album-from-your- itunes-library.html

Maybe you are looking for