WRT45G ver 7 reboot when i want to Access base web utility

i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot
info:
led power is on stable
led lan is on
led wlan on  and the access point work
1.http:\\192.168.1.1
2.enter user name and password (admin,admin)
3.hir the page begin to get  after a few second  the router reboot
Page cannot be displayed completelty
i try :
- simple reset
-(30/30/30) reset and i enter in managment mode firmware upgrade
i don't try hardware reset 
thank you for help
Solved!
Go to Solution.

i found it 
when the  router reboot  don't quit page of management mode and not refreash it  put your firmware and upgrade
the router after few minutes displyed "susseful" 
enter 192.168.1.1 and username/password "admin/admin" and the page opened without a router  reboot
thank you for all

Similar Messages

  • When i want to access in web base utility the router reboot

    i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot
    info:
    led power is on stable
    led lan is on
    led wlan on  and the access point work
    1.http:\\192.168.1.1
    2.enter user name and password (admin,admin)
    3.hir the page begin to get  after a few second  the router reboot
    Page cannot be displayed completelty
    i try :
    - simple reset
    -(30/30/30) reset and i enter in managment mode firmware upgrade
    i don't try hardware reset 
    thank you for help
    Solved!
    Go to Solution.

    i found it 
    when the  router reboot  don't quit page of management mode and not refreash it  put your firmware and upgrade
    the router after few minutes displyed "susseful" 
    enter 192.168.1.1 and username/password "admin/admin" and the page opened without a router  reboot
    thank you for all

  • Can you password protect your mail so when you want to access any mail you must enter a password?

    Can you password protect your email so when you want to access any of your mail accounts you must enter a password?  In other words before I can see my mail I must enter a password.

    On Oct 10, 2007, Matthew Morgan answered this question (discussion is now archived). I wanted to inquire further to his comment:
        Matthew Morgan Los Angeles, CA
         Re: Password protect "Mail" 
         Oct 10, 2007 7:55 AM (in response to Chester Harlan)
         Cherster,
         You could go to Settings>General>Passcode Lock and set a password to secure all your      personal data. 
    Matthew - in which program are our suggesting going to Settings?
    Thaks.

  • When i want to access blackberry ID, it appear: WE DETECT JAVASCRIPT HAS BEEN DISABED IN YOUR BROWSER

    hye.
    my blackberry got problem in blackberry ID and app world.
    cant access app world!
    help me!
    when i want to access blackberry ID, it appear: WE DETECT JAVASCRIPT HAS BEEN DISABED IN YOUR BROWSER. PLEASE ENABLE IN YOUR BROWSER TO CONTINUE
    please help me how to solve it. tq
    MOD EDIT: Subject Title edited to reflect new topic.

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • Why does google start up but when i try to access a web page it shuts off

    why does google start up but when i try to access a web page it shuts off

    Not entirely sure what you mean, but if you are saying that the Safari screen is frozen/inactive then try clearing its cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

  • WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN

    WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN

    Try a hard reset of your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • How do I access the web utility with model cisco sf302-08p ?

    Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

    restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When I want to mail a web-page or link firefox keeps opening new windows and cannot be stopped.

    My laptop is a Samsung R730 (quite happy with it). I use Eudora for e-mailing. If I want to mail a web-page or link and click under 'file'to send it, Firefox starts opening new tabs without stopping up to over a hundred. I have to brutally switch off my lap-top, start agaiu. Restart Firefox which wants to open all the old tabs, click it off quickly. After that I can reopen to normal.

    You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
    *https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

  • When I try to access a web site Firefox displays "unable to connect"

    I access Firefox and select a web site
    Firefox displays unable to connect, the "try again" button does not help
    this just started after I did a system restore

    Disabling Add-ons worked. Firefox can access the web again. Thank you for your support. AM

  • Mail keeps crashing when I want to access the Fonts

    I am using Mail 4.5 on a MacMini running 10.6.8
    Every time I compose a message and would like to change thefont, no matter which methods I choose to access the font library (either via aright click in the body of the message or from the Format pull down menu– and itdoesn’t matter if I have text in the body of the e-mail or not) – mail justcrashes.  Luckily it will save thee-mail in the drafts folder, but I have had to compose messages in Word andthen cut and paste it into Mail to ensure I get the formatting I want.
    Any suggestions as to how to smack some sense back intoMail?

    Further delving in the HELP arena I found this (which is what I am seeing):
    If a warning symbol appears next to a font name
    A yellow warning symbol next to the name of a font in Font Book indicates that you have duplicate copies of that font installed. Duplicate copies of a font may be installed when you install applications, such as those in Microsoft Office, which contain some of the same fonts already installed on your computer. You can easily resolve this problem by disabling any extra versions of the font.
    To resolve duplicate fonts:
    Select the version of the font you want to use.
    If you’re not sure which font to use, choose Preview > Show Font Info to see information about each font.
    To see all your duplicated fonts, choose Edit > Select Duplicated Fonts.
    Choose Edit > Resolve Duplicates.
    The selected version of the font is turned on and all other versions are turned off.
    HOWEVER - the options listed above are all grayed out - I cannot select "Show Info" nor "Resolve Duplicates" from the respective pulldown menus

  • Classic always loads at startup (reboot), when not wanted

    I used an old version of Quark XPress last week (because Quark 6 is such a beast in OSX, but that's another story), so of course launching prompted the simultaneous loading of the Classic flavor of OS9. I completed the work I was doing at that time (actually I gave up reviving a newly-corrupted Quark file, but that's another story) and now a week later after multiple reboots each time I am getting Classic loaded at the same time. When I go into Classic under System Preferences, the box labeled "Start Classic when you log in" is NOT checked.
    How can I get rid of this added parasite to my bootup routine, when it is not needed?

    go to system preferences, click accounts and then click the login items tab. What applications are in the list, if one of them says something about classic click it and the click the minus button at the bottom of the window.

  • HT4061 When I want to access iTunes on my IPad I obtain the message. 'Cannot connect to iTunes '

    Please assist me to access my iTunes . Thank you.

    Try this:
    Go to Settings>General>Date & Time and change the date to a few months in the future and then re-try.

  • IWeb crashes when i want to access a specific page.  Help!

    Everytime I click on one of the pages of my website to update, iWeb freezes and then crashes.  Is there a way for me to fix it or do I have to go to the genius bar?  Last time my iWeb kept crashing and I took it to the genius bar, the only way the problem was fixed was to reinstall and then go into the computer's cache and remove stuff.  I don't know if the whole cache was purged or only particular things were deleted.
    Does anyone know how I can fix the problem?  Where is the cashe and what do I need to do with it?

    See  the solution in this topic :
    Re: How do I delete a corrupt page

Maybe you are looking for

  • Business Event System in Workflow

    Hi, I am having difficulties with the Business Event System (BES). Actually, I've read the Oracle documentation about BES. Still I don't understand much. There are little documentation about the BES, and I still get blank point. Here are my questions

  • How do I download Premier Pro in cc? It is not listed in the apps list.

    How do I download Premier Pro in cc? It is not listed in the apps list.

  • More than 1 iphone on same ATT account?

    This is probably a basic question that has been answered many times...but I can't find it on the search so my apologies for any redundancy. My wife already has an iphone on our ATT family plan and is paying an extra $50 a month for the 3g Data packag

  • Off-Cycle Payroll implementation steps

    Hi Gurus, Anybody is having Off-cycle Payroll implementation Steps? Thanks in Advance Anish

  • Installation of FDM 11.1.1

    Hi All, I am going to install FDM 11.1.1 on my machine I have installed hyperion shared service, essbase , hyperion Planning, hyperionWorkspace, hyperion Repoting and analysis for hyperion 11.1.1.1.0 version on my machine. Can any one tell me what ot