WRT51AB - Not able to connect to one site when accessing thro router
When I am trying to access a particluar website directly via cable modem using ethernet cable, I am able to access the website. However if I connect the wireless router to the modem and then try to access the website using wireless connection, I am not able to access the site.
Any ideas?
Any help will be appreciated.
Thanks
Sonia
Are you able to go online using wireless router?? Logon to router’s setup page and try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, reduce fragmentation and RTS threshold to 40 by each, try upgrading latest firmware on the router… also let me know which web sites you are trying to access?? Is it secured websites?
Similar Messages
-
I am with window 7 M/C and wherever i unlocked the system after more then 10-15 min...in that case whatever pre-open site not responding.even in same session i am not able to open new site.
I have to be close firefox and then need to open the site.'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Bridge NOT able to connect to one server and send message
I have configure JMS bridge between MQ queue and a distributed queue ( which is targeting JMS servers in a cluster ).
Bridge is able to connect to all servers and transfer messages, except one.
Messages arriving on the MQ queue are delivered by the JMS bridge to all the JMS servers except one
We turned on debug on MessagingBridge on affected server and got the error msg in the attached log.
Following is the exception strace:
<Jan 21, 2010 7:22:19 PM EST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "TsysTIPSBridge" encountered some problems in one of
its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The excepti
on caught was java.lang.Exception: javax.resource.ResourceException: Error sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:714)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception ------------
javax.resource.ResourceException: Error creating producer or sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:815)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception 2 ------------
javax.jms.MessageNotWriteableException: MQJMS0008: JMS Client attempts to write a read-only message
at com.ibm.jms.JMSMessage.newMessageNotWriteableException(JMSMessage.java:4782)
at com.ibm.jms.JMSMessage.setStringProperty(JMSMessage.java:5738)
at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:773)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
I am new to JMS
Please helpWhat version of WebLogic and MQ are you using?
Have you ensured that the target Destination and Connection Factory are both WebLogic artifacts (neither should reference an MQ resource)?
Tom -
Not able to connect to UCCX IVR when my Pub server is down
Hi,
I Pub and Sub in my call Manager Group(CUCM 7.1) with my UCCX 7.0 , H.323 gateway is used for incoming and outgoing calls.
When my Pub is down the calls to the IVR keeps ringing and Agents are also not able to answer the calls, the calls land to the available agent . no prompt is played for the queue when agents are not available and call keeps ringing.
We have two incoming dial-peer configured on my H.323 gateway with preference command .
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
dial-peer voice 9 voip
preference 1
destination-pattern 9000
session target ipv4:192.168.6.31
voice-class codec 1
dtmf-relay h245-alphanumeric
dial-peer voice 11 voip
preference 2
destination-pattern 9000
session target ipv4:192.168.6.32
voice-class codec 1
dtmf-relay h245-alphanumeric
If i remove the dial-peer 9 when my Publisher server is down everthing starts working fine.
Could anyone help to find if the problem is with the gate or my UCCX server.
Regards,
VeerHi Veer
What you need to focus on here is your dial peer.
From your description it sounds more like the IOS gateway is sending calls to 192.168.6.31.
Try testing again and this time wait it out, i suspect your call will drop after 20 seconds of ringing.
You need to make the changes on the IOS gateway as the issue is not with the ccm/uccx.
voice class h323 1
h225 timeout tcp establish 3
dial-peer voice 9 voip
voice-class h323 1
dial-peer voice 11 voip
voice-class h323 1
This should do the trick.
Regards
Hoai Huynh -
I downloaded Firefox, thinking it would be better for my computer and what not. Well when I tried to use it, a screen came on saying, "Unable to connect. Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments.If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
Under that it has a try again button. But the button doesnt do anything besides refresh and tell me the same thing.A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
Erratically not able to connect to one particular network
This problem suddenly started at the office I work at with on their wireless network. I have made no changes to anything system-wise. Yesterday it began with alternating between picking up the network, with full signal but no actual connection, or having to manually connect w/password and getting "server timeout" or "connection failure" problem. There are no firewalls or proxies that anyone here knows of, and again, the problem just suddenly started happening out of nowhere.
This morning booted up and picked it was fine again for 10 minutes, then same problem again, it cut out. Tried various superficial things(turning Airport on/off, manually trying to connect) then rebooted and now it is connecting again. Who knows for how long.
I had a similar problem with Airport (I am assuming for now the problem is Aiport) on a previous MBPro, randomly not "working," and now the same, but only with certain networks.
I haven't the foggiest idea how to troublehoot this, and there isn't really an IT person here (outside consultant-$, and all Windows people anyway). I assume taking it to the Apple Store would not be useful b/c the problem is with this one network (it seems) here, not there.This problem suddenly started at the office I work at with on their wireless network. I have made no changes to anything system-wise. Yesterday it began with alternating between picking up the network, with full signal but no actual connection, or having to manually connect w/password and getting "server timeout" or "connection failure" problem. There are no firewalls or proxies that anyone here knows of, and again, the problem just suddenly started happening out of nowhere.
This morning booted up and picked it was fine again for 10 minutes, then same problem again, it cut out. Tried various superficial things(turning Airport on/off, manually trying to connect) then rebooted and now it is connecting again. Who knows for how long.
I had a similar problem with Airport (I am assuming for now the problem is Aiport) on a previous MBPro, randomly not "working," and now the same, but only with certain networks.
I haven't the foggiest idea how to troublehoot this, and there isn't really an IT person here (outside consultant-$, and all Windows people anyway). I assume taking it to the Apple Store would not be useful b/c the problem is with this one network (it seems) here, not there. -
Application not able to connect with intenet on No...
I am having aproblem with my nokia e5. I am able to browse internet and also able to use OVI store i.e. my mobile is able to connect to internet but my installed applications (like skype, fring) are not able to connect to internet.
When i change the seting to "Always Ask" and try to log into skype it continues logging in for ever... plz helpWhat happens when you try?
-
Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry -
Not able to connect to Collaborator
Hi All,
Could any one provide document or location for the collaborator.
We are trying to use collaborator which is in Smart space, but collaborator not able to connect to smart space.Hi,
We need info on Oracle Smart space product as all the hyperion web sites are redirected to Oracle.
Is there other forum for Hyperion, if yes then could you please provide me the link to that.
-Thanks -
Not able to connect to IRC Servers
For some reason since yesterday I have not been able to connect to the IRC servers from my home through any of my computers
[01:17] *** Connecting to "dever.co.US.Othernet.org:6667" (Attempt 2 of 110)
[01:17] *** Resolving host name
[01:17] *** Connecting to 208.91.197.132:6667
[01:18] *** Socket Error (10060: Attempt to connect timed out without establishing a connection)
[01:18] *** Unable to connect to IRC server
[01:18] *** Disconnected (2013-04-17 01:18:14)
[01:18] *** Connect attempt 2 of 110 failed, delaying retry for 30 seconds (Click "Disconnect" to cancel)
I tried to connect directly with the IP address
[01:12] *** Connecting to 208.91.197.132:6667
[01:12] *** Socket Error (10060: Attempt to connect timed out without establishing a connection)
[01:12] *** Unable to connect to IRC server
[01:12] *** Disconnected (2013-04-17 01:12:23)
Same problem. All my friends who do not use Verizon FIOS is able to connect to it. Just to confirm I tried to connect to IRC from work and I was able to connect.
So my conclusion is something is not right with DNS or some connectivity related problem from FIOS? I am able to connect to other sites without problems. Just the IRC is having this problem.
Any help?
Thank you,
RamI think I know why:
1. Verizon assigns IP addresses dynamically. It's an automatic process, no one is manually handing out IPs.
2. The issue is not with the IP addresses that Verizon assigns, but with the blacklists not updating the IP addresses when they are changed. Verizon can't change third party server' lists; it is up to the listing servers to keep their filters updated.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Reporting Services not able to connect with sharepoint
HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Not able to connect N70 to pc(xp) using ca-53 cabl...
Not able to connect N70 to pc(xp) using ca-53 cable
hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything. -
Not able to connect to a queue under a foreign server.
Not able to connect to a queue under a foreign server.
I'm using WebLogic Server Version: 10.3.3.0. The foreign server is running, and can be pinged from this local server. Also the port where queue resides on foreign server, can be accessed through the my local server.
OS used is AIX 6.0 on both servers.
Tried restarting the local server but nothing helps. Same error continues.
HAS ANYBODY FACED THIS PROBLEM? WHAT IS THE CAUSE AND SOLUTION FOR THIS?
It throws following errors:
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.NoInitialContextException: Failed to create InitialContext using factory specified in hashtable [Root exception is java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown']
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:247)
at javax.naming.InitialContext.initializeDefaultInitCtx(InitialContext.java:318)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:348)
at javax.naming.InitialContext.internalInit(InitialContext.java:286)
at javax.naming.InitialContext.<init>(InitialContext.java:211)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:179)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:96)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:377)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(InitialContext.java:436)
at weblogic.jms.common.CDS$2.run(CDS.java:503)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown'
at weblogic.common.internal.BootServicesStub.getMsg(BootServicesStub.java:34)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
at weblogic.security.acl.internal.RemoteAuthenticate.authenticate(RemoteAuthenticate.java:90)
at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:746)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:678)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:239)
... 46 more
>
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is null>
<Jun 25, 2012 12:14:45 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:03 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:25 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:35 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:43 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:20:53 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:24:16 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
Truncated. see log file for complete stacktrace
Edited by: 942523 on Jun 24, 2012 11:38 PMThanks René van Wijk for the reply.
I have a foreign server created in my local server, where i have already given the provider URL. This foreign server has the one queue and one queue connection factory under it to which I'm referring to.
Under JNDI tree i noticed this, for the queue(NOTIFY_QUEUE) i'm trying to read from one of the EJB:
This page displays details about this bound object.
Failed to create InitialContext using factory specified in hashtable
Also,etc/hosts has already these IP entries. Even after hardcoding the provider URL its throwing following:
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.CommunicationException [Root exception is weblogic.rjvm.PeerGoneException: ; nested exception is:
java.io.EOFException]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
at weblogic.jndi.internal.WLContextImpl.translateException(WLContextImpl.java:452)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:408)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(InitialContext.java:436)
at weblogic.jms.common.CDS$2.run(CDS.java:503)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
java.io.EOFException
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1033_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:405)
... 36 more
Caused by: java.io.EOFException
at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:338)
at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:768)
at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:702)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:890)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:840)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is t3://10.52.50.51:7002>
Let me know if any other thing i'm missing or it can be something else like network or some other issue. -
IPad 2 - I am not able to connect my iPad 2 to my tv anymore using AV adapter.
What is wrong with my iPad 2? I'm not able to conect my iPad to my proyector or tv anymore using AV adaptor. Is there something wrong with my iPad?
I tried it with my wife's iPad 2 and it was the same result. I was not able to connect her iPad to my TV. Niether TV or a proyector couldn't find the device.
Would you please help me? Your help will be well appreciated.Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
Try another adaptor before worrying about your ipad. -
11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit
Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM
Maybe you are looking for
-
MTL MATERIAL TRANSACTION error 'CALL_TO_CONTRACTS'. Please help.
I am getting the following error from the MTL_TRANSACTIONS_INTERFACE table while running a material transaction. You have encountered an unexpected error in 'CALL_TO_CONTRACTS': (No Data Found). I know that there is an query not being properly fulfil
-
Cannot install Office 2013 during task seqeunce after installing R2
Hi, Since we installed SCCM 2012 R2, I have not been able to install Office in my baseline captures using a task sequence (64-bit OS). Ronni Pederson suggested using an Application rather than a Package but in his example, the application is being pu
-
I have Elements 8 on LR3 if I upgrade to elements 9 do I need to uninstall 8 or will 9 right over the top of 8 . And will I need to set 9 back up as an external editor or will it do this auto for me? TY
-
Printing with actions in photoshop cs4
Part of my work-flow is to run an action that finishes with printing to a Canon CLC3200. Photoshop records the action fine, but when the action is run the print simply does not come out, there are no faults or error messages. Can actions include a st
-
Flash will down load completely but won't play video
eidnolb- XP Home Addition (sevice pack? told you I was a novice) Internet Explorer 7...only one installed. Running AVG antivirus. I've disable just now working on uninstalling and reinstalling Flash. I installing flash with out McAfee. Also diable