WRT54 Router will only let one Wireless device on at a time

I have a laptop and a PC that are both set up to work wirelessly. I can access each one onto the router separately but not both at the same time. If I turn one off, the network will let the other one on and vice versa. I am using a WEP key. Is there a option on the router that I need to change? Please any feedback.

Check under Network connectinos under both the Laptops if any PPPOE connection or any DIAL up xonnectino is present or not ... Also check if the Network Bridge is present or not ... if so delete it & check the Ip address under both the Laptops ...

Similar Messages

HT204411 i am trying to purchase many songs at one time. i have added all songs to wish list , now to purchase it will only let me do one at a time please advise how i can purchase more than one at a time

i am trying to purchase many songs at one time. i have added all songs to wish list , now to purchase it will only let me do one at a time please advise how i can purchase more than one at a time

There used to be a 'buy all' button on the wish list screen but for some reason that has been removed from the current version of iTunes so you will need to buy each item individually. You can try leaving feedback for Apple and maybe it'll be added back in a future update : http://www.apple.com/feedback/itunesapp.html

When I update my iphone software, I lost my old contacts. I see the backups under devices but it will not allow me to restore when I right click. It will only let me delete the backup. How can I restore this backup? Thanks!

When I updated my iphone software, I lost my contact information. I see the backup on the devices menue in iTunes. However, it will only let me delete this backup and not restore it. How can I restore my old contacts to my iPhone? Thanks!

You will have to restore your iphone.

InDesign CC will only let me place images from one directory

I am a print designer and recently switched from a PC to a MacBook Pro. I'm using InDesign CC and it will only let me place images from one directory. If I try and choose another directory, the Finder window just disappears.

Are you on Mac 10.9? There is an issue on mac 10.9 w.r.t finder window when try to open/pace file in "cover flow view" mode. The finder window dissapears then.
Workaround: Choose Icon View, List View, or Column View

My 4 gig MuVo will only let me use 224 megabyt

I have a Nomad MuVo2 4.0 gig and I can put music on it but it will only let me use 224 mb. I updated the firmware, drivers, and I reformatted it more than once. I've also tried using different programs to load music but none can put on more than like 50 because of the memory issue.... Please help, i dont want to have to buy another one. -matt

Hi Littlescroll
Other MuVo players have a problem if too many files are placed in the root folder of the device. I'm not sure if this applies to your MuVo2 as it has a HDD but if you do access it using folders (does it appear as a dri've letter in Windows Explorer?) then the solution is to create sub-folders beneath the root folder and put your files there. You don't have to go as far as creating separate folders for each album - a single Music folder with everything else inside it will work.
Apologies if I have got it wrong about the way the MuVo2 works.
PB

Will only print one page.

When i go to a multi page site ,the printer will only print one page .

Hi @elkman_5883,
Welcome to the HP Forums!
I noticed that your printer will only print one page, and I am happy to help you with this issue!
For further assistance, I require some additional information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
If you are using Windows, I recommend trying our HP Print and Scan Doctor, and please let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

My Itunes will load on Apple TV and play, but only plays one song at a time. It will not shuffle or continuously play an album. All of the songs display, but will only play one at a time...home sharing is on. Any suggestions?

My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....

My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....

After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

Upgraded to Lion, CS3 programs will only let me open 1 photo per session, what gives?

Just upgraded to Lion from Snow Leopard. Now my CS3 Creative Suite programs will only let me open one picture per session. I then have to completely close out of photoshop or illustrator or whatever and reopen to open another picture. Any suggestions before I have to take my computer to the apple store.

http://roaringapps.com/ show some people having problems with various things. Have you tried reinstalling CS3? If that doesn't work, restore from a backup if needed to stay in production until a solution or an upgrade can be worked out.
I'm not sure the Apple Store will troubleshoot 3rd party software that is 3 versions old.

HT1670 Sync iPhone/Entourage will only recognize one of my two iPhones?

I have two iPhones. One I have managed to sync no problem, but the second is just not interested! A friend told me that with iPhone/Entourage will only recognize one iPhone, if so is there anything I can do to sync my second phone?

Hi, Darcie13.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

I have an all in one with wifi. It will only print one or one and a half pages

My printer will only print one or one and a half pages at a time.

Hi , Welcome to the HP Forums! I noticed that your HP Envy 4500 printer will only print one or one and a half pages, on Windows 8.1. I am happy to look into this printing issue for you! Some questions for you: What happens when you try print multiple copies? Copying Documents.Do you see any error messages on the front panel of the printer when it stops printing? Does the paper get stuck inside the printer? What happens if you print from NotePad?
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

My DSL provider says they only allow one wireless network--

My DSL provider says they only allow one wireless network. Can I do the following?
My existing wireless network consists of a single DSL/ActionTec modem connected to an Airport Extreme (configured using two additional Airport Expresses for wireless printing and air-tunes). I have great wireless coverage all through my house. My office is in a detached building about 200 feet from my house. I want to tap into my existing wireless system by running a Cat5 cable to my office and set up another Airport Express (and two more airport expresses for printing and air-tunes for my office). Would this technically be considered two separate wireless networks if I run the Cat5 cable between the two Airport Extremes (since there would only be one connection to the ActionTec DSL modem)? Would my DSL provider know I have established a secondary wireless network? Would my DSL provider have any ability to prevent these two separate networks from working properly on one DSL line?

It really doesn't make much difference. If you run it from your DSL modem, you will in effect have two separate networks, but they should still be able to talk to each other. If you run it from your Airport from the LAN prt, that will work too but the DHCP you will set up in your office will have to be different from your first Airport. For example: If your first Airport is set up to hand out IP addresses on the 10.0.1.X network, your office irrport will have as it's WAN IP 10.0.1.Y and the wirless IP Range will have to be something like 192.168.1.x. But again, it shouldn't make much of a difference either way. itunes etc, will still work.

Text file will only print one set of input and puts in end for name.

Okay, I have this more or less straightened out. Only thing is, it creates the text file, and will only enter one set of data. It will not print the other students information to the text file. The other thing it does is puts in the student name as end. I think that has something to do with the fact that I need to compare the student name field (SName) to end, so the program can be ended. Anyone have some ideas? I have been working on this for almost 2 weeks, and am about ready to throw the computer off a cliff..
Thanks.
import java.io.*;
import java.lang.*;
import java.text.*;
import java.util.*;
import java.text.DecimalFormat;
import java.lang.Comparable;
class my_main
     public static void main (String [] args) throws IOException
     gradebook pt= new gradebook();
     pt.compare();
class gradebook
     char LG;
     double gr1;
     double gr2;
     double gr3;
     double avg;
     String SName;
     String IDNO;
     String nameupper;
     int compareTo;
     void compare()throws IOException
     FileWriter file= new FileWriter("Grades.txt");
     BufferedWriter bw= new BufferedWriter(file);
     PrintWriter outfile= new PrintWriter(bw);
BufferedReader stdin;
stdin= new BufferedReader (new InputStreamReader (System.in));
System.out.println("Enter Student Name or End to Quit: ");
SName= stdin.readLine();
nameupper= SName.toUpperCase();
DecimalFormat fmt= new DecimalFormat ("##.##");
outfile.println ("");
outfile.println (" STUDENT GRADES ");
outfile.println ("");
outfile.println ("SName ID # GRADE 1 GRADE 2 GRADE 3 AVERAGE LETTER");
while(nameupper.compareTo("END")!=0)
if (nameupper.equalsIgnoreCase("END"))
break;
     System.out.print ("Student ID: ");
     IDNO= stdin.readLine();
     System.out.print ("Grade One: ");
     gr1= Double.parseDouble(stdin.readLine());
     System.out.print ("Grade Two: ");
     gr2= Double.parseDouble(stdin.readLine());
     System.out.print ("Grade Three: ");
     gr3=Double.parseDouble(stdin.readLine());
     System.out.println ("");
     avg=(gr1+gr2+gr3)/3.0;
     if (avg >= 90) LG = 'A';
else if (avg >=80 && avg <90) LG = 'B';
else if (avg >=70 && avg <80) LG = 'C';
else if (avg >=60 && avg <70) LG = 'D';
else LG = 'F';
System.out.println("Enter Student Name or End to Quit: ");
SName= stdin.readLine();
nameupper= SName.toUpperCase();
outfile.print (""+SName);
outfile.print (" "+IDNO);
outfile.print (" "+fmt.format(gr1));
outfile.print (" "+fmt.format(gr2));
outfile.print (" "+fmt.format(gr3));
outfile.print (" "+fmt.format(avg));
outfile.print (" "+LG);
outfile.println("");
outfile.close();


Not 100% sure this is what you're after, but it seems to work OK
import java.io.*;
import java.lang.*;
import java.text.*;
import java.util.*;
import java.text.DecimalFormat;
import java.lang.Comparable;
class my_main
public static void main (String [] args) throws IOException
    gradebook pt= new gradebook();
    pt.compare();
class gradebook
char LG;
double gr1;
double gr2;
double gr3;
double avg;
String SName;
String IDNO;
String nameupper;
int compareTo;
void compare()throws IOException
    FileWriter file= new FileWriter("Grades.txt");
    BufferedWriter bw= new BufferedWriter(file);
    PrintWriter outfile= new PrintWriter(bw);
    BufferedReader stdin;
    stdin= new BufferedReader (new InputStreamReader (System.in));
    System.out.println("Enter Student Name or End to Quit: ");
    SName= stdin.readLine();
    nameupper= SName.toUpperCase();
    DecimalFormat fmt= new DecimalFormat ("##.##");
    outfile.println ("");
    outfile.println ("STUDENT GRADES ");
    outfile.println ("");
    outfile.println ("SName ID # GRADE 1 GRADE 2 GRADE 3 AVERAGE LETTER");
    while(nameupper.compareTo("END")!=0)
      if (nameupper.equalsIgnoreCase("END"))
      break;
      System.out.print ("Student ID: ");
      IDNO= stdin.readLine();
      System.out.print ("Grade One: ");
      gr1= Double.parseDouble(stdin.readLine());
      System.out.print ("Grade Two: ");
      gr2= Double.parseDouble(stdin.readLine());
      System.out.print ("Grade Three: ");
      gr3=Double.parseDouble(stdin.readLine());
      System.out.println ("");
      avg=(gr1+gr2+gr3)/3.0;
      if (avg >= 90) LG = 'A';
      else if (avg >=80 && avg <90) LG = 'B';
      else if (avg >=70 && avg <80) LG = 'C';
      else if (avg >=60 && avg <70) LG = 'D';
      else LG = 'F';
      outfile.print (SName+" "+IDNO+" "+fmt.format(gr1)+" "+fmt.format(gr2)+
                      " "+fmt.format(gr3)+" "+fmt.format(avg)+" "+LG+"\r\n");
      System.out.println("Enter Student Name or End to Quit: ");
      SName= stdin.readLine();
      nameupper= SName.toUpperCase();
    outfile.close();
}

HT201318 I'm trying to purchase a plan on my phone and it will only let me choose the $100. upgrade

I'm trying to purchase a plan on my phone and it will only let me choose the $100. plan which i dont need

Yes, but if you delete the iCloud account and start again, don't you have to wait 90 days for everything to start syncing?? I've been having this problem for months and no one seems to be able to figure it out. I used to have one Apple ID (which was not an email address) and then when iOS came along....and iCloud, they force you to use your email address as ID ....which actually sets up a SECOND Apple ID. I have a Mac, iPad, iPod touch and iPhone. the Apple techs tried to delete the iCloud accounts so that they all said the same thing (email address ID) but then I had to wait 90 days. the 90 days just passed and nothing is automatically syncing yet. I still think there are 2 accounts but if I delete all again.....it's going to be another 90 days (for security reasons, I was told). This is a real pain in the butt.

WRT54 Router will only let one Wireless device on at a time

Similar Messages

Maybe you are looking for