WRT54 V8 - Unable to connect to router... Help!
Hi Guys!
Not sure what I'm doing wrong, but I'm not able to connect to my router. I'm new to this whole wireless network and have hit a road block.
I put in the CD and followed the instructions. When I get to the point of it detecting my computer settings, I get the following message: "Unable to connect to the router. Check that the router has been connected to the computer and that your ethernet adapter is working."
I was able to connect to the neighbors network from my folks place, so I know it works. I'm guessing if I could get passed that point of the wizard, I'd be able to set up my network...
Any suggestions would be greatly appreciated.
Thanks in advance!!
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link
Similar Messages
-
Last night I was watching some random video on youtube on my laptop when suddenly I lost my signal. This happens often when I stream multiple videos, usually just an unplug and replug of the router's power cord does the trick. Didn't work this time. Annoyed, I tried to reinstall my router for a fix (is usually my last resort) but at the part where it tries to find the router I get this "Unable to connect to router!" message. I can still seem to connect to the internet with the router on the desktop, but my laptop doesn't even read my wireless. Pinging the router I get time outs, IPconfig gives me a 71.59. instead of a 192.168. I can't connect to the router configuration through 192.168.1.1 at all. I tried unplugging absolutely everything and reseting the router but I'm still stuck. Any help would be appreciated.
Hard reset router for 1 minute and reboot it. Check if IP address is 192.168.1.xxx or not.
-
I am unable to update my software in settings, just says an error occured. I am alsos unable to connect to the app and itunes store. (no error message occured) just says unable to connect. I am using cellular data and its turned on. Help me please
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
Imac i7 unable to connect to router at 270mbs on DGN2000
Hello,
I have a Netgear DGN2000 router and i decided to switch the speed settings from 130Mbs to 270Mbs, but after doing so my imac was unable to connect. I tested my windows based laptop and that was working fine. I switched back to 130Mbs and it connected.
I've checked the Network utility and the Link speed is currently at 54Mbs (not even 130Mbs).
Airport is compatible with Draft N speed but why is my Imac not even connecting to the router when i select 270Mbs, any suggestions?
Many Thanks
S
Message was edited by: scottydoguk
Message was edited by: scottydogukWireless connection speeds (or lack thereof) are a bit difficult to figure out; for instance: do you have anything else that is using the network which still only works with the earlier slower "g"? Usually the network will only work as fast as the slowest (weakest) link. How far is the iMac from the router and are there any obstacles in between (walls, ceilings, anything metal, appliances, etc). And, who is your ISP, how old are the cables they are using from their hub to your house, is there a splitter?
After almost 2 years of mediocre speeds with Comcast, it was finally determined that a) their cable from the box to the house was defective and replaced and b) they supplied a new splitter. At the same time, I replaced all the Cat5 cables with Cat6 and got a new router (Netgear WNR3500) and haven't had a problem since. -
M82 Unable to connect to router
I have recently started up my Thinkcentre M82 tower and it's unable to connect to my home router/modem.
I'm not sure if this is because it lacks the correct drivers or if it's a different problem but it would be wondeful if someone knows the issue.
The only Network Adapter I have is: Intel (R) 82579LM Gigabit Network ConnectionReboot the router.
Remove the security from the router.
If you're able to connect with no security on the router, re-add the security and try it again. If it won't connect, either use a different type of security that does work, or just get a new router. There have been a number of reports of (especially) older Netgear routers that have compatibility problems with newer devices (both iPhones and Adroid devices). The problem is most likely the router. -
At a loss. Have comcast wifi. No issues connecting to iPad and laptop. However, when I try to connect iPhone 5 with OS 7 or applets with latest software I get unable to connect message. I can get the iPhone to connect if right next to modem, but unable to connect one room away. iPads have no issues and connect from any room.
Hello Tvsteven,
Thank you for providing all the details regarding the Wi-Fi connection issue you are experiencing with your Apple TV. I found an article with some steps you can take to troubleshoot an issue like this.
I recommend reviewing the full article, but the section titled "If you can see your Wi-Fi network, but you are unable to connect to it" specifically stands out to me for the situation you described:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Thank you for using Apple Support Communities.
Best,
Sheila M. -
EA6500 Unable to connect to router
I just bought the EA6500 last week. Had to RMA it on Monday and got the new one today. The issue still persists. The power light is constantly blinking and my computer is unable to obtain an IP address from it. I contacted tech support and was unable to get the issue resolved so I had it exchanged believing it was defective. The new one does the same thing. When I connect my computer to it, the light on my Ethernet port stays a solid orange instead of green like it does for my usual router. The Cisco light is constantly blinking. I would really like some assistance in this issue as I doubt I would receive two defective routers in a row.
Solved!
Go to Solution.The EA-6500 has many many issues i also bought one awhile back and it was broke right out of the box never could get it to work or connect and i have set up many routers. I would return it get your money back and then research your next router purchase.
-
Cisco 886 VA initial set up question - unable to connect to router
Hallo,
I am trying to set up my Cisco 886 VA router, but after approx 5sec of "network identification" the network status on my PC is disconnected and I cannot access the router at 10.10.10.1 . The FE port blinks green during this time, then stops and the overall status is green.
I tried 4 different PCs, have DHCP enabled, all directly connected to one of the FE ports vie ethernet cabel. I also tried fixed IP setting (10.10.10.2 with 255.255.255.248, gateway 10.10.10.1), same result. I also tried hardware reset. And tried to connect via the configuration professional client that would just hang up.
Any idea what I might be doing wrong? Please be gentle if its a stupid question, I am new to networking
Thanks & regards
HelgeSorry for not responding, I went on vacation
I finally figured it out: the factory setting of the 886 has no IP address assigned and all FE ports are shut down.
This means the only way to connect to it is like Alain suggest via console, then assign the IP address to VLAN1 and open the FE ports.
I realize now that the Cisco 8xx serie is not for retail customers, but requires learning the Cisco IOS CLI - I am gioing through this now step by step, long journey, especially because I have VDSL IPTV with T-online as my goal
The only thing that troubles me: the Cisco documentation that came with the product clearly stated that the router comes with pre-configured IP enabled Fastehternet port and suggested this as a method to do the initial set up. It would be nice to update those docs to reflect that the only way to connect is the console via COM and hypertm.
Thanks for the resoponses, this topic can be closed - I just added this response in case someone searches for the topic. -
Blackberry Messenger, E-mail not working and I am unable to connect to servers, help please?
I recently got a blackberry curve 8520 contracted with virgin media, with my package I get free BBM/ email services free. However both services haven't worked in 4 weeks. I cannot connect to any servers and error code (65), whatever it means, pops up every time I try to log into Windows Live Messenger. I have re-sent registration messages, as instructed by the troubleshooting manual, which have been successful each time. Does someone, anyone know how to fix this?
I have tried, it is very hard to actually talk to a member of their team. As I said it worked before and I had no issues. The problem occurred over night and my phone says that I am connected to my mobile network but not blackberry internet service. I have successfully registered plenty of times. I have tried updating my phone ect but nothing has worked so far.
-
Unable to connect to the router! (wrt54g v. 2)
I just got a router from a garage sale; it was still in the box and everything.
Well, I tried hooking it up to my modem and computer to get wifi, but I can't get it to work.
This is the setup:
modem -> router -> computer
I can access the internet when the setup is this way, but there's no wifi, and I can't access 192.168.1.1 or set it up using the CD it came with. When I go through the setting up process with the CD, I get this error message that says "Unable to connect to router! Check that the router has been connected to the computer, and that you're ethernet adapter is working."
When I try to go to 192.168.1.1, it says "The connection has timed out." I can't ping it either.
I've also tried resetting it several times, but that doesn't do anything.
Someone please help!Hi sylentknight and welcome to the forums!
You said that you are able to connect to the internet with this set-up: modem -> router -> computer right? So does that mean that you can ping the router when it is connected directly to your computer? Reason why I'm asking is if it does work, you can try to configure the router for the wireless settings while it is directly connected to the router first then try to go wireless. Please let me know if understood your post correctly. -
Cannot connect to router E1000
Hello,
I own a E1000 router that I use with several wireless machines. I have no problem connecting to the internet.
Unfortunately, I cannot connect to the configuration of the router by typing https://192.168.1.1/ nor http://192.168.1.1/ in a browser, be it wirelessly or wiredly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router".
I tried to switch my router off and on, but that doesn't help. Totally resetting the router solves the problem, but not definitely.
Is there a solution that does not require resetting my router?
Thank you very much.(I don't see anymore how to edit my initial post.)
The message displayed by Firefox is “The connection was reset” and not what I had translated into “Connection has been reinitialized”.
As far as the OSs are concerned, the machines that should be able to access my router are running Ubuntu, Android, Windows and an embed version of Linux. I tried with different webbrowsers, including Firefox and the Android Browser.
Please tell me if I should add any additional information.
I did a lot of search on the web and some say that similar problems come from the option of HTTPS that is selected for accessing the administration page. Is this correct? Should I abandon the idea of wanting a configuration with HTTPS? -
Frustrated - Can't connect to router with laptop after disconnect, other devices work fine.
I have a RevI Actiontec router with dual antennas(not sure of firmware as I am not at home). My wife can be on her laptop all day, then when I come home with my IPad, it make her lose connection to the router. The router still connects to my iPhone 4 and iPad (both with iOS 6.0.1), but she is unable to connect to router at all. Everything continues to function normally on my Apple devices, so we are still connected to the internet. I have a laptop as well, and when this is happening, both of the laptops stop connecting, but the apple devices and our Toshiba TV and BluRay players continue to function normally. As a temp fix, I disconnect internet from my iPad and restart the router. It works until we try to run both at the same time.
I am mildly computer literate, though I know little about network setups beyond security, MAC filtering, and other slightly advanced setup stuff.
This is really frustrating and seems to be getting worse. We used it like this in our new house for several months before this started happening.Also check to make sure neither of the devices are set to use a static IP address.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
Hi my son cant seem to connect to itunes on his ipod although yesterday it was working a few days ago. Any advise? We downloaded a new game onto it yesterday through itunes on the computer but with it being unable to connect to itunes it wont load up on his devise. It doesn't say there is an error. just unable to connect. Please help. Thanks
Managed to find the answer to this problem by another clever user. U need to change the date (year i think)) and then try and log in again. thanks to the 'Demo' who helped us
-
My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Bought an app last night. Tried to buy another an hour later and got the window that says "Cannot connect to iTunes Store". Still unable to connect to store today. Tried restarting router. Help please....thanks.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom
Maybe you are looking for
-
Hi experts, I'm facing this problem and really hope you'll be able to help me ! I'm trying to add an internal table to my smartform interface in order to import datas from the calling program. The structure of this table is defined in the calling pr
-
Started with dock crash, now can't log in
This might be a little disjointed because I'm copying my 3 posts from another forum because I didn't get any answers..... I installed Yosemite on my early 2013 iMac yesterday and have mostly been unable to use my account since the install. The first
-
I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I convert?
-
I am using Appleworks 6. The table that I created stops at two pages - I need to add many more cells, but when I add a new one, it just writes over an old one. How do I add a third page with blank cells??
-
My Trips and Expenses - tab refresh functionality
Hi Experts, Only one tab from My trips and Expenses screen is getting refreshed after clicking 'My trips and Expense' link. I found SAP note 1542417, which says after implementation of note 1495681 or corresponding support package, the refresh of POW